Remove Spare Tire From 2019 Ram 1500: A Step-by-Step Guide For 5th Gen Owners [Update On 2025]

To remove the spare tire from a 2019 Ram 1500, first locate the spare tire winch system under the truck, near the bumper. Use the appropriate tool to lower the tire by turning the winch. Follow safety precautions by securing the truck and wearing gloves. For detailed instructions, refer to the step-by-step guide in your manual or watch a video tutorial.

Once the tire is fully lowered, pull it out from underneath the truck. Be cautious of the weight, as the tire may be heavier than expected. Next, disconnect the tire from the winch mechanism by removing any threaded components. This may involve loosening a bolt or twisting a latch, depending on your model.

After fully detaching the tire, check the winch for any potential debris or damage before reassembling. Proper maintenance ensures the spare tire remains functional when needed.

With the spare tire removed, 5th Gen owners should now consider how to maintain their vehicle’s spare tire setup. Proper storage and regular checks ensure the spare tire remains in good condition and ready for use in emergencies.

Table of Contents

What Tools Will You Need to Remove the Spare Tire from a 2019 Ram 1500?

To remove the spare tire from a 2019 Ram 1500, you will need a few essential tools.

Spare Tire Kit (includes jack, jack handle, and lug wrench)
Tire Pressure Gauge (for checking tire pressure)
Gloves (to protect hands)
Flashlight (if working in low light)

The tools listed above provide a clear pathway to safely and effectively remove the spare tire from your vehicle. Understanding each tool’s significance will enhance your experience and efficacy during the task.

Spare Tire Kit: The spare tire kit includes a jack, a jack handle, and a lug wrench. The jack is essential for lifting the vehicle, allowing access to the spare tire. The lug wrench enables you to loosen and remove the lug nuts that hold the tire in place.
Tire Pressure Gauge: A tire pressure gauge is useful for checking the pressure of the spare tire before installation. This ensures that the spare is properly inflated and safe for use.
Gloves: Wearing gloves protects your hands from dirt and potential injuries. Handling tools and tires can be rough, and gloves provide an extra layer of safety and cleanliness.
Flashlight: A flashlight is important when working in low-light conditions, such as at night or in a garage with poor lighting. It provides clear visibility of the tools, tire, and space under the vehicle.

In conclusion, having the right tools helps facilitate the spare tire removal process efficiently and safely. Understanding their roles ensures a smoother experience.

How Can You Locate the Spare Tire Release Mechanism on a 2019 Ram 1500?

You can locate the spare tire release mechanism on a 2019 Ram 1500 by following a simple process involving the tailgate and the necessary tools.

First, ensure you have the required tools. You will need the following:

Spare tire tool kit: This typically includes a winch tool and a lug wrench.
Flashlight: A flashlight can help illuminate the area if visibility is low.

Next, follow these steps to locate the mechanism:

Open the tailgate: Ensure you open the tailgate fully to access the area beneath the vehicle.
Locate the access port: Look for a round access port or hole in the rear bumper or under the bed of the truck. This port covers the spare tire winch mechanism.
Insert the winch tool: Take the winch tool from your spare tire tool kit and insert it into the access port. This tool operates the winch that holds the spare tire.
Turn the tool: Rotate the tool counterclockwise to lower the spare tire from under the truck. Continue turning until you hear the tire drop to the ground, or feel resistance indicating that the tire is fully released.
Retrieve the spare tire: Once the tire is down, you can pull it out from under the vehicle. Be careful as it may be heavy.

By following these steps, you can easily locate and release the spare tire on a 2019 Ram 1500 when needed.

What Are the Exact Steps to Safely Lower the Spare Tire from a 2019 Ram 1500?

To safely lower the spare tire from a 2019 Ram 1500, follow these precise steps:

Gather necessary tools.
Locate the spare tire winch tool.
Remove the winch tool and insert it into the winch access point.
Rotate the winch tool counterclockwise to lower the tire.
Remove the tire once it is fully lowered.
Store the tools and tire properly.

These steps provide a clearer view of the process needed to access the spare tire safely. However, some users may have differing opinions on the ease of this task or potential complications that could arise.

User experience may vary based on individual skill levels.
Alternative tools might be preferred for convenience.
Some users report difficulty if the winch mechanism is rusty.
Others suggest routine maintenance to prevent issues.

Now, let’s explore these perspectives further.

User Experience Based on Skill Levels: Different users may have varied experiences based on their mechanical skills. Beginners may find the process confusing, while experienced users execute it smoothly.
Alternative Tools for Convenience: Some users prefer using a ratchet or a different kind of wrench for practicality. A dedicated tool can make the task easier and quicker, leading to a better user experience.
Difficulty with Rusty Winch Mechanism: If the winch mechanism is rusty, lowering the spare tire becomes challenging. Regular inspection and maintenance can prevent this issue. Users may want to apply lubricant to keep the mechanism functioning properly.
Routine Maintenance Recommendations: Regularly checking the condition of the spare tire and winch mechanism can save time and effort when needed. Experts recommend an annual inspection to ensure everything remains in working condition.

These insights highlight not only the steps to lower the spare tire but also the variances in user experiences and suggestions for maintaining ease of use.

What Should You Do if the Spare Tire Won’t Budge on a 2019 Ram 1500?

If the spare tire won’t budge on a 2019 Ram 1500, check for rust, debris, and corrosion. Apply penetrating oil if needed and consider using tools like a tire tool or a rubber mallet for better leverage.

Inspect for Rust and Corrosion
Clear Debris Around the Tire
Apply Penetrating Oil
Use Correct Tools
Seek Professional Assistance
Check Owner’s Manual

To ensure a smooth troubleshooting process, let’s delve deeper into each of these points.

Inspect for Rust and Corrosion: Inspecting for rust and corrosion is crucial. The spare tire on the Ram 1500 is often susceptible to these issues, especially if the vehicle is frequently exposed to moisture. Rust can bond the tire to the mounting bracket, making it difficult to remove. A visual assessment can help identify any significant rust buildup.
Clear Debris Around the Tire: Clearing debris around the tire is another essential step. Dirt, mud, and other materials can obstruct the tire’s release mechanism. Ensure that all surrounding areas are clean to provide a clear path for removal. This task generally entails a simple cleanup with a brush or cloth.
Apply Penetrating Oil: The application of penetrating oil can facilitate the removal process. A product like WD-40 can help loosen any stuck components. Allow the oil to soak for several minutes to ensure it penetrates deep into the bond formed by rust or debris.
Use Correct Tools: Using the correct tools is vital for effectively removing the tire. A socket wrench or tire tool may provide the leverage needed to loosen stubborn components. Additionally, a rubber mallet can be beneficial for applying force without damaging the tire or rim.
Seek Professional Assistance: If all else fails, seeking professional assistance may be necessary. Tire specialists possess training and tools to handle difficult situations. They can provide solutions without risking damage to the vehicle.
Check Owner’s Manual: Checking the owner’s manual can offer specific instructions tailored to the 2019 Ram 1500. The manual may include diagrams, illustrations, or recommendations for removing the spare tire safely and effectively. This resource can provide valuable insight into manufacturer advice.

By following these detailed steps, you can effectively troubleshoot and address an unyielding spare tire situation on your 2019 Ram 1500.

How Can You Inspect the Spare Tire After Removing It from a 2019 Ram 1500?

You can inspect the spare tire after removing it from a 2019 Ram 1500 by checking its condition, evaluating air pressure, and examining for damage or wear.

First, assess the tire’s physical condition. Conduct a visual inspection for any cracks, bulges, or foreign objects embedded in the tire. These issues can compromise the integrity of the tire during use. Check the sidewalls and tread areas closely, as they are common sites for damage.

Next, evaluate the air pressure. Use a tire pressure gauge to measure the pressure of the spare tire. The recommended pressure information is usually found on a sticker located inside the driver’s side door frame or within the owner’s manual. Proper inflation is crucial for ensuring the spare tire performs effectively when needed. A tire that is too low on air may not support the vehicle’s weight adequately, while over-inflation can lead to tire failure.

Finally, check for tread depth and wear patterns. Use a tread depth gauge or the penny test, where you insert a penny into the tread with Lincoln’s head facing down. If the tread does not cover part of Lincoln’s head, the tire may not provide sufficient traction. Uneven wear could indicate alignment issues that should be addressed before using the tire.

By following these steps, you ensure that your spare tire is in a suitable condition for use, enhancing both safety and performance when it is needed.

What Maintenance Tips Are Essential for the Spare Tire of a 2019 Ram 1500?

To maintain the spare tire of a 2019 Ram 1500, several essential tips should be followed.

Regularly check tire pressure.
Inspect for visible damage.
Rotate the spare tire.
Keep it clean and free from debris.
Ensure proper storage conditions.
Verify the expiration date if applicable.

These tips help ensure reliability and safety while using the spare tire when needed.

Regularly Check Tire Pressure: Regularly checking tire pressure is crucial for the spare tire. Proper tire pressure ensures that the tire can function effectively when required. The recommended pressure for the spare tire can usually be found on a sticker inside the driver’s side door. According to the National Highway Traffic Safety Administration (NHTSA), under-inflated tires can lead to slower response times, tire blowouts, and decreased fuel efficiency.
Inspect for Visible Damage: Inspecting the spare tire for visible damage is necessary for safety reasons. Look for cracks, blisters, or punctures. Damage can compromise the tire’s integrity. The Rubber Manufacturers Association (RMA) suggests visually inspecting tires once a month to catch potential issues early. Regular inspections can prevent accidents during roadside emergencies.
Rotate the Spare Tire: Rotating the spare tire can help promote even wear. Some vehicle owners may choose to use their spare tire temporarily in regular rotation. The Tire Industry Association recommends rotating such tires every 5,000 to 7,500 miles to lengthen their lifespan. This practice may ensure better performance when required.
Keep It Clean and Free from Debris: Keeping the spare tire clean and free from debris involves removing dirt and road grime. This maintenance keeps the tire in good condition and prevents corrosion. A simple wash with soap and water and drying can keep the tire clean. According to a study by the American Society for Testing and Materials (ASTM), debris can hinder tire performance and lead to degradation over time.
Ensure Proper Storage Conditions: Ensuring proper storage conditions for the spare tire is crucial. A tire should be stored in a cool, dry place away from direct sunlight. According to the Tire and Rim Association (TRA), exposure to sunlight and extreme temperatures can cause tires to deteriorate, leading to safety concerns. Proper storage maintains the tire’s integrity for when it is needed.
Verify the Expiration Date if Applicable: Verifying the expiration date of the spare tire is an essential aspect of maintenance. Tires can degrade even if they are not frequently used. The U.S. Tire Manufacturers Association (USTMA) recommends replacing a tire that is more than six years old, regardless of its appearance. A tire’s manufacturing date can be found on the sidewall, indicating when it was made. This knowledge can help ensure the spare tire is safe to use.

What Common Mistakes Should You Avoid When Removing the Spare Tire from a 2019 Ram 1500?

When removing the spare tire from a 2019 Ram 1500, you should avoid several common mistakes. These errors can lead to inefficiency or even damage to the vehicle.

Failing to gather necessary tools.
Forgetting to consult the owner’s manual.
Not loosening lug nuts before lifting the vehicle.
Lifting the truck on an unstable surface.
Neglecting to engage the parking brake.
Mishandling the spare tire during removal.
Skipping a visual inspection of the spare tire.

Avoiding these mistakes ensures a successful and safe removal process. Each point addressed carries importance for vehicle maintenance and safety.

Failing to Gather Necessary Tools:
Failing to gather necessary tools creates difficulties during the removal process. Essential tools include a jack, a lug wrench, and a safety tool. The 2019 Ram 1500 typically comes with a designated tool kit in the trunk, including a jack and a handle. Not having the right tools can lead to wasted time or improper handling of the spare tire.
Forgetting to Consult the Owner’s Manual:
Forgetting to consult the owner’s manual can lead to overlooking critical instructions specific to the vehicle. The owner’s manual contains information on tire removal procedures, jack placement, and torque specifications for lug nuts. Ignoring these details increases the risk of damage or improper tire installation.
Not Loosening Lug Nuts Before Lifting the Vehicle:
Not loosening lug nuts before lifting the vehicle can make the job unnecessarily difficult. Loosening them first allows for easier removal once the truck is elevated. Failing to do this can lead to stripping lug nut threads or damaging the wheel. It is best practice to loosen lug nuts while the tire is still on the ground for stability.
Lifting the Truck on an Unstable Surface:
Lifting the truck on an unstable surface complicates the removal process. It may result in the jack tipping over, leading to potential injury or vehicle damage. Always choose a flat, stable surface for lifting. A proper jack placement on a solid ground maintains the vehicle’s safety during the process.
Neglecting to Engage the Parking Brake:
Neglecting to engage the parking brake increases the risk of the vehicle rolling during tire removal. Engaging the brake secures the vehicle, providing safety while changing tires. It is an essential step that prevents accidental movement of the vehicle.
Mishandling the Spare Tire During Removal:
Mishandling the spare tire during removal may lead to damage or personal injury. Spare tires can be heavy and awkward to handle. Creating a plan for how to lift and maneuver the tire reduces the risk of injury. Proper technique in lifting and carrying the spare is essential for safety.
Skipping a Visual Inspection of the Spare Tire:
Skipping a visual inspection of the spare tire can lead to future issues. Ensuring the spare tire is in good condition before use is crucial. Inspecting for sufficient tread depth and checking tire pressure ensures that the spare is safe and usable when needed.

Related Post:

Remove Spare Tire from 2019 Ram 1500: A Step-by-Step Guide for 5th Gen Owners