How To Remove Spare Tire From 2019 Nissan Pathfinder: Step-by-Step Guide [Update On 2025]

To remove the spare tire from a 2019 Nissan Pathfinder, find the jack and tools first. Insert the T-bar into the lowering mechanism at a 40-degree angle. If needed, lift the car with the jack to reach the bolts. Check for rust or blockages in the mechanism if you face issues. Always prioritize safety during the process.

Begin by loosening the spare tire lock with the wrench. Turn it counterclockwise until it is free. Then, find the jack located in the rear storage compartment and place it on stable ground under the vehicle. Raise the Pathfinder to lift the spare tire off the ground. With the tire elevated, reach under the vehicle and pull the spare tire toward you.

Once you have maneuvered the spare tire free, lower the jack and securely stow the tools back in their compartment.

Now that you know how to remove the spare tire from a 2019 Nissan Pathfinder, you may want to learn how to properly install the spare tire when needed. The installation process is just as important for your vehicle’s safety. Let’s explore that next.

Table of Contents

What Tools Do You Need to Remove a Spare Tire from a 2019 Nissan Pathfinder?

To remove a spare tire from a 2019 Nissan Pathfinder, you will need specific tools.

Jack
Lug wrench
Wheel chocks
Gloves
Safety goggles

Having these tools readily available ensures a smooth and safe process. Understanding the function of each tool can make the task easier.

1. Jack:
A jack is a mechanical device used to lift the vehicle off the ground. It allows access to the tires for removal and replacement. The 2019 Nissan Pathfinder typically comes with a scissor jack, which is compact and designed for easy operation.

2. Lug Wrench:
A lug wrench is a tool used to loosen and tighten lug nuts that secure the tire to the wheel hub. The Pathfinder usually includes a cross-style lug wrench that provides better leverage, making it easier to remove stubborn lug nuts.

3. Wheel Chocks:
Wheel chocks are wedge-shaped blocks that prevent the vehicle from rolling while lifted. Placing them under the opposite tires ensures extra safety during the tire change.

4. Gloves:
Wearing gloves serves as a protective measure when handling tools and the tire itself. This step helps avoid injuries and maintains cleanliness while handling potentially dirty tires.

5. Safety Goggles:
Safety goggles protect your eyes from dust and debris that may be present while you work on the vehicle. This is especially important if you’re working in an area with loose gravel or roadside debris.

Each tool plays a critical role in ensuring a safe and efficient tire change. Familiarizing yourself with their usage can also promote confidence in performing routine vehicle maintenance.

How Do You Access the Spare Tire on a 2019 Nissan Pathfinder?

To access the spare tire on a 2019 Nissan Pathfinder, locate the spare tire tool in the vehicle, identify the access point under the vehicle, and use the tool to lower the tire.

Locate the spare tire tool: The spare tire tool is typically found in the rear storage compartment of the vehicle. You will find it situated under the cargo mat or beneath the floor liner. This tool is essential for operating the mechanism that lowers the spare tire.
Identify the access point: The spare tire is mounted under the rear of the vehicle. You will see a circular access hole on the rear bumper or under the cargo area. This is where you will insert the tool to control the spare tire lowering mechanism.
Use the tool to lower the tire: Insert the winding handle into the access point and turn it counterclockwise. This action will lower the tire from its mount. Continue turning until the tire is fully lowered to the ground.
Remove the spare tire: Once the tire is lowered, you can detach it from the cable securing it. Be cautious as the tire may be heavy.

Following these steps will allow you to access the spare tire efficiently and safely.

Where Can You Find the Spare Tire Release in a 2019 Nissan Pathfinder?

You can find the spare tire release in a 2019 Nissan Pathfinder underneath the rear of the vehicle. First, locate the spare tire hoist access hole, which is usually covered by a plastic cap. Remove this cap using a flat-blade screwdriver or similar tool. Next, insert the provided winch tool into the access hole. Turn the winch tool counterclockwise to lower the spare tire to the ground. Follow these steps carefully to access the spare tire effectively.

What Is the Step-by-Step Process for Removing the Spare Tire from a 2019 Nissan Pathfinder?

The process of removing the spare tire from a 2019 Nissan Pathfinder involves several specific steps. First, ensure the vehicle is parked on a flat surface and set the parking brake. Next, locate the spare tire beneath the vehicle. Use the tool kit, which includes a jack, wrench, and spare tire hoist, to remove the tire securely.

The Nissan Pathfinder owner’s manual provides detailed instructions for this process. According to Nissan’s guidelines, correct procedures ensure safety and prevent damage to the vehicle’s components. Following the manufacturer’s instructions is essential for proper tire maintenance.

Removing the spare tire requires adequate knowledge of the vehicle’s components. It is crucial to familiarize oneself with the locations of tools and parts. The spare tire is typically stored under the rear of the vehicle and is secured with a hoist mechanism. Awareness of these details enhances efficiency during the removal process.

Additional authoritative sources, like the National Highway Traffic Safety Administration, emphasize the importance of checking the spare tire’s accessibility. Accessibility can be critical during emergencies when time is of the essence and safety is a priority.

Factors affecting the ability to remove the spare tire may include dirt accumulation, rust on the hoist, or wear in tools. Regular maintenance can help mitigate these issues.

Approximately 20% of drivers do not know how to change a tire, according to a 2021 survey by AAA. This statistic highlights the importance of education and preparedness for roadside emergencies.

Improper tire maintenance can lead to dangerous situations, including getting stranded or accidents on the road. Increased awareness and preparedness can help drivers avoid such risks.

Effective solutions include regular checks of the spare tire and tools, practicing tire changing techniques, and attending safety workshops. Organizations like AAA offer courses on tire safety and emergency roadside assistance to enhance driver knowledge.

Specific techniques such as using a torque wrench properly and inspecting tire conditions can help ensure that drivers are prepared for emergencies. Staying informed about vehicle specifics ensures that drivers can manage their vehicles effectively.

By following these guidelines, drivers can confidently remove the spare tire when necessary. This knowledge helps avoid frustrations in the event of a flat tire.

What Precautions Should You Take Before Removing the Spare Tire?

Precautions you should take before removing the spare tire include ensuring safety, preparing necessary tools, and confirming vehicle stability.

Park on a level surface
Activate hazard lights
Engage the parking brake
Gather the necessary tools
Inspect the tire and tools for safety
Avoid busy areas or traffic

Taking these precautions is vital to ensure a safe tire change process, creating a secure environment while addressing potential pitfalls.

Park on a level surface:
Park on a level surface to prevent the vehicle from rolling. This ensures better stability during the tire removal process. A sloped or uneven surface can cause the vehicle to shift unexpectedly.
Activate hazard lights:
Activate hazard lights to alert other drivers. This adds an extra layer of safety by making your vehicle more visible. According to the National Highway Traffic Safety Administration (NHTSA), using hazard lights can reduce the risk of accidents during roadside emergencies.
Engage the parking brake:
Engage the parking brake to secure the vehicle. This helps prevent movement during tire removal. A reliable parking brake can be a critical factor in avoiding accidents.
Gather the necessary tools:
Gather the necessary tools, including a jack, lug wrench, and spare tire. Having tools readily available simplifies the process. The American Automobile Association (AAA) recommends checking these tools regularly.
Inspect the tire and tools for safety:
Inspect the tire for damage and check tools for functionality. A thorough inspection can prevent accidents and help avoid further complications. Research indicates that 1 in 5 drivers do not regularly check their spare tire condition, emphasizing the importance of inspection.
Avoid busy areas or traffic:
Avoid busy areas or traffic when changing a tire. This provides a safer environment and minimizes risks. The Insurance Institute for Highway Safety (IIHS) emphasizes that working in isolated areas can lower accident likelihood.

These precautions can help create a safer experience when removing the spare tire and prevent potential hazards during the process.

What Challenges Might You Face When Removing the Spare Tire?

Removing a spare tire can present several challenges.

Accessibility of the spare tire
Proper tools requirement
Difficulty in loosening lug nuts
Heavy lifting of the spare tire
Safety concerns while lifting
Weather conditions affecting the process

These challenges range from basic accessibility issues to safety concerns. Each factor can impact the tire removal process significantly.

Accessibility of the Spare Tire: Accessibility of the spare tire refers to how easily one can reach it. Spare tires are often located under the vehicle or in a compartment that may require moving other items. For instance, if the spare is under the vehicle, debris or obstructions may hinder access. A study by the National Safety Council indicates that improper access increases the likelihood of accidents during the tire-changing process.
Proper Tools Requirement: Proper tools requirement refers to the need for specific tools to remove a spare tire effectively. Missing or inappropriate tools can delay the process. A typical spare tire removal kit includes a jack, lug wrench, and possibly a crowbar. The Consumer Product Safety Commission notes that using incorrect tools can lead to tool failure or injury.
Difficulty in Loosening Lug Nuts: Difficulty in loosening lug nuts occurs due to rust, cross-threading, or over-tightening. Lug nuts that have not been removed for a long time can seize up, making them particularly hard to turn. According to a report by the American Automobile Association (AAA), approximately 12% of roadside assistance calls involve changing a tire, often due to complications like stuck lug nuts.
Heavy Lifting of the Spare Tire: Heavy lifting of the spare tire describes the physical challenge of handling and positioning the spare tire once removed. Some spare tires can be quite bulky or heavy, leading to strain or injury if proper lifting techniques are not used. The Centers for Disease Control and Prevention (CDC) emphasize using knees instead of the back to avoid injury while lifting heavy objects.
Safety Concerns While Lifting: Safety concerns while lifting relate to ensuring personal safety during the tire-changing process. Lifting a spare tire improperly can lead to accidents or injuries. The Occupational Safety and Health Administration (OSHA) gives guidelines for proper lifting techniques to minimize risks during such activities.
Weather Conditions Affecting the Process: Weather conditions affecting the process can complicate tire removal. Rain, snow, or extreme temperatures can create slippery conditions or make the process uncomfortable. The American Weather Association reports that changing tires in inclement weather increases the chances of slips and decreases efficiency in completing the task.

Understanding these challenges can better prepare individuals for removing a spare tire safely and effectively.

How Can You Overcome Common Problems When Removing a Spare Tire?

To overcome common problems when removing a spare tire, ensure you have the right tools, follow the proper steps, and maintain safety throughout the process.

First, gather the necessary tools. This usually includes:
– Jack: A hydraulic or scissor jack is needed to lift the vehicle.
– Lug wrench: This tool loosens and tightens the lug nuts.
– Wheel chocks: Use these to block the wheels and prevent rolling.
– Gloves: They protect your hands from dirt and sharp edges.

Second, prepare the vehicle properly.
– Park on a flat surface: This prevents the car from rolling.
– Turn on hazard lights: This alerts other drivers that you are stationary.
– Engage the parking brake: This offers additional security while you work.

Third, locate the spare tire and tools.
– Check the owner’s manual: It contains information on the location of the spare tire and necessary equipment.
– Remove any covers or fastenings: Some vehicles may have storage compartments or covers that need to be detached.

Fourth, lifting the vehicle safely is crucial.
– Position the jack under the designated lift point: This area is reinforced to support the car’s weight.
– Raise the vehicle until the tire is off the ground: Avoid lifting it too high to maintain stability.

Fifth, remove the tire effectively.
– Use the lug wrench to loosen the nuts: Turn counterclockwise while applying consistent pressure.
– Remove the lug nuts completely: Keep them in a safe place to avoid losing them.
– Pull the tire straight off the hub: Avoid twisting, as it can damage components.

Finally, when replacing the tire, follow these steps.
– Align the spare tire with the wheel hub: Ensure the holes line up.
– Hand-tighten the lug nuts: Screw them on loosely first.
– Lower the vehicle and tighten securely: Use the wrench to finish tightening in a star pattern for even pressure.

According to the National Safety Council (NSC), over 6,000 injuries occur each year due to improper tire changes. Following these steps can help ensure a safer experience when removing or changing a spare tire.

What Should You Do After Removing the Spare Tire from a 2019 Nissan Pathfinder?

After removing the spare tire from a 2019 Nissan Pathfinder, you should inspect the area, properly secure the tools, and replace the spare tire with a fully inflated one.

Inspect the spare tire area.
Clean any debris or dirt.
Secure tools and equipment.
Replace the spare with a full-size tire.
Check tire pressure and condition.

Transitioning from these critical steps, let’s explore each action in detail to ensure proper procedures are followed after removing the spare tire.

Inspect the Spare Tire Area: Inspecting the spare tire area involves checking for any damage or dirt. Ensure that the mounting plate is intact and that there are no loose parts. This step helps in identifying any potential issues that may hinder the performance of the spare or the vehicle.
Clean Any Debris or Dirt: Cleaning any debris or dirt from the spare tire compartment is essential. A clean space prevents contaminants from affecting the spare tire’s condition and ensures proper storage for future use. Make sure to remove any leftover tools or materials that may have fallen during the wheel change.
Secure Tools and Equipment: Securing tools and equipment includes putting away any wrenches, jacks, and other gear used during the tire change. Ensure these items are stored in the appropriate compartments of your vehicle. This prevents any sliding around while driving and ensures they are readily available for future emergencies.
Replace the Spare with a Full-Size Tire: Replacing the spare with a full-size tire means you should mount the standard tire back onto the vehicle. Make sure to properly torque the lug nuts to the manufacturer’s specifications, generally detailed in the vehicle’s manual. This step ensures safe driving conditions and maintains the vehicle’s integrity on the road.
Check Tire Pressure and Condition: Checking tire pressure and condition involves using a tire pressure gauge to verify that the tires are inflated to the recommended psi. Inspect for any visible signs of wear or damage. Proper tire pressure enhances vehicle handling, fuel efficiency, and safety.

What Are Common Mistakes to Avoid During the Spare Tire Removal Process?

To avoid mistakes during the spare tire removal process, individuals should be cautious and prepared.

Common mistakes to avoid during the spare tire removal process include:
1. Not using the parking brake.
2. Failing to use wheel chocks.
3. Ignoring manufacturer instructions.
4. Not wearing gloves.
5. Lifting the vehicle incorrectly.
6. Neglecting to inspect the spare tire.
7. Underestimating the weight of the tire.
8. Rushing the process.
9. Forgetting tools.
10. Skipping proper disposal of the flat tire.

Addressing these mistakes helps ensure a safer and more efficient tire change.

Not Using the Parking Brake: Not using the parking brake increases the risk of vehicle movement. A vehicle must stay stationary during tire removal. For example, a report by the National Highway Traffic Safety Administration highlights that many accidents occur due to improper vehicle positioning.
Failing to Use Wheel Chocks: Failing to use wheel chocks can lead to slippage. Chocks prevent the vehicle from rolling. The American Automobile Association recommends placing chocks behind the wheels of vehicles that are not being lifted.
Ignoring Manufacturer Instructions: Ignoring the manufacturer’s instructions can result in incorrect procedures. Each vehicle has unique specifications for tire removal, as stated in the owner’s manual. Following the correct guidelines minimizes the risk of mistakes.
Not Wearing Gloves: Not wearing gloves can expose hands to dirty or sharp objects. Gloves provide protection and improve grip for tasks involving heavy or greasy components. This simple action enhances safety during the process.
Lifting the Vehicle Incorrectly: Lifting the vehicle incorrectly risks injury. The jack should always be positioned on designated lift points. Manufacturer guidelines specify where to place the jack for safety.
Neglecting to Inspect the Spare Tire: Neglecting to inspect the spare tire before installation can lead to further issues. Checking the tire’s air pressure and condition ensures it is safe for use. According to tire safety experts, a spare should be checked regularly.
Underestimating the Weight of the Tire: Underestimating the weight of the tire can cause strain or injury. Tires can be heavier than expected. Individuals should prepare adequately and use proper lifting techniques.
Rushing the Process: Rushing the process increases the likelihood of mistakes. Taking time to follow each step carefully ensures thoroughness and safety. Set aside ample time when preparing to change a tire.
Forgetting Tools: Forgetting tools can halt progress during the tire change. A checklist can ensure all necessary equipment is collected beforehand. Safety equipment should be prioritized in any tire change kit.
Skipping Proper Disposal of the Flat Tire: Skipping proper disposal of the flat tire can lead to environmental issues. It is essential to dispose of tires according to local regulations. Many automotive shops offer tire disposal services.

Avoiding these common mistakes enhances safety and efficiency during the spare tire removal process.

Related Post:

How to Remove Spare Tire from 2019 Nissan Pathfinder: Step-by-Step Guide