Spare Tire Location: How to Access and Change on a 2019 GMC Acadia

by

The spare tire on a 2019 GMC Acadia is located in the cargo area. To reach it, fold down the back seats. The tire is under the floorboard. You will find a jack and tools to remove lug nuts with the spare tire. Follow these steps for easy access when you need it.

After revealing the spare tire compartment, you will see a winch mechanism. Insert the special tool into the winch socket. Turn the tool counterclockwise to lower the tire from its compartment. Once the tire is accessible, you can manually pull it out for replacement.

When changing the tire, ensure to find a stable location. Utilize the jack and lug wrench from the vehicle to lift the car and replace the flat tire with the spare.

Once the tire is changed, reverse the process to store the spare tire back in its location.

Now that you understand how to access and change the spare tire on a 2019 GMC Acadia, let’s discuss key safety tips to consider during this process. Safety is crucial when handling tire changes, so being informed makes a difference.

Where is the Spare Tire Located on a 2019 GMC Acadia?

The spare tire on a 2019 GMC Acadia is located underneath the vehicle. To access it, you need to locate the tire hoist handle in the rear cargo area. Then, remove the carpeted cover in the cargo space. Use the tire hoist handle to lower the spare tire from its compartment under the vehicle. This process allows you to reach the spare tire easily when needed.

How Can You Access the Spare Tire on a 2019 GMC Acadia?

You can access the spare tire on a 2019 GMC Acadia by using a combination of tools provided in the vehicle, removing the cover in the cargo area, and lowering the tire from its storage position.

To access the spare tire, follow these steps:

  1. Locate the tools: The 2019 GMC Acadia comes with a jack, a lug wrench, and a tire hoist tool, typically stored in a compartment in the cargo area.

  2. Remove the cargo cover: Inside the rear cargo area, find the plastic cover on the floor. This cover conceals the spare tire compartment. Lift it carefully to avoid damaging it.

  3. Unfasten the tire hoist: Use the tire hoist tool to loosen the spare tire. Insert the hoist tool into the designated hole beside the spare tire and turn it counterclockwise. This action will release the tire from its locked position.

  4. Lower the spare tire: Continue turning the hoist tool until the spare tire is fully lowered to the ground. The tire will drop to the ground, allowing for easy removal.

  5. Remove the spare tire: Once the spare tire is on the ground, pull it out from the compartment. Ensure that no additional items are caught in the mechanism while removing it.

  6. Store everything properly: After you have finished, store the tools back in their designated compartments, and secure the cargo cover properly.

By following these steps, you can easily access and remove the spare tire in a timely manner in case of a flat tire or emergency.

What Tools Do You Need to Change the Spare Tire on a 2019 GMC Acadia?

To change the spare tire on a 2019 GMC Acadia, you will need specific tools and equipment.

The essential tools required include:
1. Spare tire
2. Jack
3. Lug wrench
4. Wheel chocks
5. Vehicle owner’s manual

Having the right tools is crucial for an efficient tire change. Next, let’s examine each tool and its role in the process.

  1. Spare Tire:
    The spare tire is the replacement tire that fits your vehicle’s specifications. It is necessary to have a spare that is compatible with the 2019 GMC Acadia. This tire is often a compact design, known as a “donut,” which may have limitations regarding speed and distance.

  2. Jack:
    The jack is a device used to lift the vehicle off the ground. The 2019 GMC Acadia usually comes with a scissor jack or hydraulic jack. Properly using the jack ensures that the vehicle is lifted safely and securely, allowing you to remove the flat tire.

  3. Lug Wrench:
    The lug wrench is a tool used to loosen and tighten the lug nuts that secure the tire to the wheel hub. It’s typically a cross-shaped tool that provides better leverage. Using the correct type of lug wrench is important for loosening the nuts without stripping them.

  4. Wheel Chocks:
    Wheel chocks are wedges placed behind the wheels to prevent the vehicle from rolling while you change the tire. This tool increases safety during the change process. It is crucial to place chocks on the opposite side of the flat tire before lifting the vehicle.

  5. Vehicle Owner’s Manual:
    The vehicle owner’s manual contains specific instructions and details about changing the tire on a 2019 GMC Acadia. It includes information on the location of the spare tire, jack, and other tools. Referring to the manual can help ensure that you follow the correct procedures specific to your vehicle.

In summary, the necessary tools to change the spare tire on a 2019 GMC Acadia include a spare tire, a jack, a lug wrench, wheel chocks, and the vehicle owner’s manual.

Which Tools Are Essential for Changing the Spare Tire?

The essential tools for changing a spare tire include a spare tire, jack, lug wrench, and wheel chocks.

  1. Spare tire
  2. Jack
  3. Lug wrench
  4. Wheel chocks

These tools are vital for safely and effectively changing a tire. Each tool plays an important role in the tire change process.

  1. Spare Tire:
    The spare tire is a crucial component when replacing a flat tire. It serves as a temporary replacement for the damaged tire. Spare tires can be full-size or a compact “donut” type. Full-size spare tires provide better handling and are safer for longer distances. Compact spare tires are lighter and save space but are limited in speed and distance use.

  2. Jack:
    The jack lifts the vehicle off the ground to allow for tire removal and installation. Most vehicles come with a scissor jack or a hydraulic floor jack. Scissor jacks are compact but may require more manual effort. Hydraulic jacks offer ease of use and stability, making them preferable. Using a jack correctly prevents accidents during the tire change.

  3. Lug Wrench:
    The lug wrench is used to loosen and tighten the lug nuts that secure the tire. This tool typically has a cross shape or a long handle for leverage. A standard lug wrench is important to ensure proper torque when securing the new tire. Power lug wrenches offer quick and efficient nut removal but require a power source.

  4. Wheel Chocks:
    Wheel chocks are placed under the wheels of the vehicle to prevent movement during the tire change process. They act as a safety measure when the vehicle is raised on a jack. Using wheel chocks is a best practice to avoid accidental rolling and potential injuries. They can be made of wood or rubber and come in various sizes.

The use of these tools ensures a safe and efficient tire change, reducing the risk of accidents while providing a functional spare to get back on the road.

How Do You Change the Spare Tire on a 2019 GMC Acadia?

To change the spare tire on a 2019 GMC Acadia, you need to follow these key steps: secure the vehicle, remove the wheel cover if necessary, use the jack to lift the vehicle, remove the lug nuts, take off the flat tire, place the spare tire on, and lower the vehicle back to the ground.

  1. Secure the vehicle: Park the Acadia on a flat surface. Engage the parking brake to prevent the vehicle from moving. This ensures safety while you work on changing the tire.

  2. Remove the wheel cover: If your Acadia has a wheel cover on the flat tire, you need to remove it first. Use a flat tool or your hands to carefully pry off the cover without damaging it.

  3. Use the jack: Locate the vehicle jack under the rear seat or in the rear compartment. Position the jack under the designated lifting point near the flat tire. Turn the jack handle to raise the vehicle until the flat tire is off the ground. Make sure the jack is stable during this process for safety.

  4. Remove the lug nuts: Use the lug wrench to loosen and remove the lug nuts. Turn them counterclockwise until they come off completely. It may be easier to do this while the tire is still touching the ground to prevent spinning.

  5. Take off the flat tire: Once the lug nuts are removed, pull the flat tire straight off the hub. Take care not to damage the hub during this step.

  6. Place the spare tire on: Align the spare tire with the wheel hub and push it onto the hub. Replace the lug nuts and hand-tighten them to secure the spare.

  7. Lower the vehicle back to the ground: Use the jack to lower your vehicle slowly. Once the tire is supporting the weight of the vehicle, fully tighten the lug nuts in a star pattern to ensure even pressure.

Following these steps allows you to safely change the spare tire on a 2019 GMC Acadia. Always ensure you are prepared by reviewing the owner’s manual for any specific instructions or safety precautions related to your vehicle.

What Should You Do After Changing the Spare Tire on a 2019 GMC Acadia?

After changing the spare tire on a 2019 GMC Acadia, you should follow specific steps to ensure your safety and the proper functioning of your vehicle.

  1. Check Tire Pressure: Ensure the spare tire is inflated to the recommended pressure.
  2. Store the Flat Tire: Place the flat tire and tools back in the vehicle.
  3. Inspect the Spare Tire: Examine the spare tire for any visible damage or wear.
  4. Drive Safely: Drive slowly and cautiously, especially if the spare tire is a temporary one.
  5. Visit a Mechanic: Have the flat tire repaired or replaced as soon as possible.

To maintain vehicle safety and performance, it is essential to consider various perspectives related to these actions.

  1. Tire Pressure Importance: Proper pressure ensures optimal handling and fuel efficiency.
  2. Flat Tire Storage: Proper storage prevents damage to the flat tire and tools.
  3. Spare Tire Condition: Understanding wear and tear can prevent future issues.
  4. Driving Caution: Driving slowly can minimize risk while using a spare.

  5. Maintenance Recommendations: Seeking professional help aligns with long-term vehicle care goals.

  6. Tire Pressure Importance: Checking tire pressure after changing the spare tire is crucial. The right tire pressure ensures safety and improves fuel efficiency. Under-inflated tires can lead to reduced handling, causing potential accidents.

  7. Flat Tire Storage: Properly storing the flat tire prevents damage and maintains the tools for future use. Keeping the flat tire secured in the trunk avoids unnecessary movement that can harm other items in the vehicle. Additionally, organizing tools promotes easier future tire changes.

  8. Spare Tire Condition: Inspecting the spare tire for damage protects you from future failures. Spare tires can deteriorate over time. For example, a spare tire that shows cracks or significant wear may not perform effectively.

  9. Driving Caution: Driving cautiously after changing tires protects both the vehicle and occupants. Temporary spare tires typically have speed limits. For instance, following a speed limit of 50 mph ensures safety.

  10. Maintenance Recommendations: Consulting a mechanic soon after a tire change enhances vehicle reliability. Mechanics can evaluate the flat tire for repairs or replacements. Timely attention prevents alignments and issues that could arise from continued use of a spare tire.

Following these steps ensures that you maintain the safety and integrity of your vehicle.

Where Can You Find Replacement Tires for a 2019 GMC Acadia?

You can find replacement tires for a 2019 GMC Acadia at various locations. Start by checking local tire shops, as they often carry a range of options. Major retailers, like Walmart or Costco, also sell tires and may provide installation services. Online platforms such as Tire Rack and Amazon offer convenient purchasing options, including direct shipping to your home or a local installer. Additionally, visit your GMC dealership for brand-specific tires and professional advice. Always compare prices and warranty options before making a purchase to ensure you get the best deal.

What Maintenance Tips Should You Follow for the Spare Tire on a 2019 GMC Acadia?

To maintain the spare tire on a 2019 GMC Acadia, follow essential care tips to ensure its readiness for use.

  1. Regularly check tire pressure.
  2. Inspect the spare tire for visible damage.
  3. Store the spare tire in a clean, dry place.
  4. Rotate the spare tire periodically.
  5. Ensure that the jack and tools are functional.
  6. Replace the spare tire as needed, especially if it is older than six years.
  7. Verify the spare tire size matches your vehicle’s specifications.

These tips highlight the critical aspects of spare tire maintenance, ensuring that the tire remains functional when required.

  1. Regularly Check Tire Pressure: Regularly check tire pressure on your spare tire to ensure it remains within the manufacturer’s recommended range. The ideal pressure for the spare tire on a 2019 GMC Acadia is typically specified on the tire information label found on the driver’s side door jamb. Under-inflated tires can fail when you need them most, as under-inflation increases the risk of blowouts.

  2. Inspect the Spare Tire for Visible Damage: Inspect the spare tire for cuts, cracks, or bulges. Physical damage can compromise the tire’s integrity. The National Highway Traffic Safety Administration recommends checking all tires, including spares, at least once a month. If the spare tire shows significant damage, consider replacing it.

  3. Store the Spare Tire in a Clean, Dry Place: Store the spare tire in a clean and dry location to prevent rust and deterioration. Humidity and moisture can lead to tire rot over time. A good practice is to keep the spare tire secured in its designated compartment in the vehicle, as this protects it from environmental harm.

  4. Rotate the Spare Tire Periodically: Rotate the spare tire periodically to maintain even wear and prolong its lifespan. This practice follows the same rotation pattern as the vehicle’s regular tires. A tire’s lifespan can be extended through balanced use.

  5. Ensure that the Jack and Tools are Functional: Check the spare tire tools, such as the jack and lug wrench, regularly to ensure they are working correctly. Faulty tools can complicate a tire change during an emergency. Most vehicle owner manuals, including the one for the GMC Acadia, provide maintenance recommendations for these tools.

  6. Replace the Spare Tire as Needed: Replace the spare tire if it is older than six years, even if it appears unused. Tire rubber degrades over time, so aging tires can become unsafe. The Rubber Manufacturers Association advises replacing tires after this period.

  7. Verify the Spare Tire Size Matches Your Vehicle’s Specifications: Ensure that the spare tire size matches the specifications outlined in your owner’s manual. An incompatible spare can lead to vehicle handling issues and compromise safety during travel. Always double-check the size before relying on the spare tire.

By following these maintenance tips, you can ensure that your 2019 GMC Acadia’s spare tire is reliable and ready for use when necessary.

How Often Should You Check the Spare Tire on Your 2019 GMC Acadia?

You should check the spare tire on your 2019 GMC Acadia at least once every six months. Regular checks ensure that the tire maintains proper inflation and is free from damage. Inspect the spare tire before long trips or when seasonal changes occur. This practice helps prevent issues when you need to use the spare tire. Additionally, check the tire’s pressure and tread condition during routine vehicle maintenance. Keeping the spare tire in good condition supports your overall safety on the road.

Related Post:

Leave a Comment