Why Does My Car Say Low Tire Pressure? Causes, Solutions & TPMS Light Tips

by

If your car shows a low tire pressure warning, it means the tire-pressure monitoring system has detected an issue. This often happens due to low air pressure, which can drop with temperature changes. Always check tire pressure regularly and keep it at safe levels for safer driving.

To address low tire pressure, regularly check your tire pressure using a gauge. Inflate tires to the recommended pressure level, which is usually found on a sticker inside the driver’s door. If a tire consistently loses air, it may need inspection or repair.

If the Tire Pressure Monitoring System (TPMS) light remains illuminated after fixing the issue, it may require resetting. Consult your vehicle’s manual for specific instructions on resetting the TPMS light.

Understanding all components related to tire pressure is crucial. Proper tire maintenance ensures safety, enhances fuel efficiency, and extends tire lifespan. In the following section, we will explore additional tips for maintaining your tire pressure and maximizing road performance.

What Does Low Tire Pressure Mean for My Car?

Low tire pressure means that the air pressure in your car’s tires is below the recommended level. This condition can affect your vehicle’s performance, safety, and fuel efficiency.

  1. Causes of Low Tire Pressure
  2. Effects on Vehicle Performance
  3. Impact on Safety
  4. Fuel Efficiency Concerns
  5. Potential Long-term Damage
  6. Tire Pressure Monitoring System (TPMS) Response
  7. Corrective Measures

Understanding the causes and effects of low tire pressure is essential for car maintenance and safety.

  1. Causes of Low Tire Pressure:
    Low tire pressure occurs for several reasons such as temperature changes, natural air loss, and punctures. Tire pressure typically drops in colder weather because cold air condenses. The U.S. Department of Energy notes that tires can lose 1 PSI (pounds per square inch) of pressure for every 10°F decrease in temperature. Additionally, tires naturally lose air over time, at a rate of about 1-2 PSI per month. Punctures from sharp objects can also cause immediate pressure loss.

  2. Effects on Vehicle Performance:
    Low tire pressure negatively impacts vehicle performance. Under-inflated tires lead to reduced handling ability, making the vehicle less stable in turns. The National Highway Traffic Safety Administration (NHTSA) states that properly inflated tires maintain better traction on road surfaces. For example, tires inflated to the recommended pressure can improve the vehicle’s grip, especially in wet conditions.

  3. Impact on Safety:
    Safety is a significant concern with low tire pressure. Under-inflated tires can increase the risk of blowouts, particularly during high-speed driving, which can lead to accidents. According to the NHTSA, approximately 2,000 crashes per year are attributed to tire-related issues linked to low pressure. Maintaining the correct tire pressure reduces the likelihood of such incidents.

  4. Fuel Efficiency Concerns:
    Low tire pressure decreases fuel efficiency. Under-inflated tires increase rolling resistance, which causes the engine to use more fuel. The U.S. Department of Energy estimates that maintaining proper tire pressure can improve fuel economy by 3-5%. For example, a vehicle that regularly operates with low pressure could cost the owner hundreds of dollars a year in additional fuel expenses.

  5. Potential Long-term Damage:
    Long-term driving on low tire pressure can cause uneven tire wear and internal damage to the tires. Tire manufacturers such as Michelin warn that persistent low pressure can lead to fractures in the tire structure. Repairing or replacing damaged tires can incur significant costs.

  6. Tire Pressure Monitoring System (TPMS) Response:
    The Tire Pressure Monitoring System (TPMS) alerts drivers to low tire pressure. This system uses sensors in each tire to measure pressure. When pressure drops below a certain threshold, the TPMS light illuminates on the dashboard. The inclusion of TPMS in modern vehicles has improved awareness of tire conditions and promoted vehicle safety.

  7. Corrective Measures:
    Corrective measures include regularly checking tire pressure, adjusting the pressure according to the manufacturer’s specifications, and inspecting for punctures. The recommended tire pressure is usually found on a sticker inside the driver’s side door or in the vehicle’s manual. Regular maintenance helps ensure optimal performance and safety.

In summary, low tire pressure poses several risks and consequences for your vehicle. Maintaining proper pressure is crucial for safety, performance, and efficiency.

What Are the Common Causes of Low Tire Pressure?

Low tire pressure commonly results from factors such as temperature changes, tire leaks, or overloading of the vehicle.

  1. Temperature changes
  2. Tire leaks
  3. Overloading of the vehicle
  4. Valve stem damage
  5. Improper tire installation

Temperature changes can affect tire pressure. Cold air causes air molecules in tires to contract, leading to lower pressure. For example, a drop of 10°F can reduce tire pressure by 1 psi (pound per square inch). The National Highway Traffic Safety Administration (NHTSA) recommends regularly checking tire pressure, especially when seasonal temperatures fluctuate.

Tire leaks are another significant cause. Small punctures or damage from road hazards can slowly release air. According to the Rubber Manufacturers Association, about 30% of inspected tires may exhibit a slow leak. A common solution is to inspect tires for visible damage and use tire sealants for minor leaks.

Overloading of the vehicle affects tire pressure. Each tire has a maximum load capacity, and exceeding this can lead to increased pressure within the tire. The maximum load is indicated on the tire’s sidewall. Overloading can also result in uneven wear, reducing tire lifespan and safety.

Valve stem damage occurs when the valve that inflates the tire is cracked or corroded. This can cause air to escape. Regular inspections can identify such issues, allowing for timely replacements.

Improper tire installation can lead to poor sealing and low pressure. For instance, if a new tire is not mounted correctly, it may leak air. Ensuring professional installation is essential for maintaining tire pressure integrity.

Addressing these common causes can help maintain optimal tire pressure, improving vehicle safety and performance.

How Do Temperature Variations Affect Tire Pressure?

Temperature variations affect tire pressure significantly due to the relationship between air temperature and gas volume. As temperatures decrease, tire pressure drops, and as temperatures increase, tire pressure rises.

  1. Gas Laws: The ideal gas law explains that gas pressure is affected by temperature. When the temperature decreases, the air inside the tire contracts, reducing pressure. Conversely, when the temperature rises, air expands, increasing pressure.

  2. Variation Examples: A common rule of thumb states that tire pressure decreases by approximately 1 PSI (pound per square inch) for every 10°F drop in temperature. For instance, if the temperature drops from 70°F to 30°F, the tire pressure could decrease by about 4 PSI.

  3. Safety Risks: Low tire pressure can lead to reduced traction and increased stopping distance. According to a study from the National Highway Traffic Safety Administration (NHTSA) in 2018, under-inflated tires contribute to over 300,000 accidents annually in the U.S.

  4. Optimal Pressure Maintenance: Tire manufacturers recommend checking tire pressure monthly. The recommended pressure, typically found on the driver’s side door jamb or in the vehicle manual, should be maintained regardless of temperature variations.

  5. Temperature Fluctuations: Rapid changes in temperature, such as those experienced with seasonal transitions, can lead to inconsistent tire pressure. Drivers should remain vigilant and adjust tire pressure accordingly.

By understanding how temperature can affect tire pressure, drivers can ensure safer driving conditions and improve tire longevity.

Why Does Natural Air Loss Lead to Low Tire Pressure?

Natural air loss leads to low tire pressure due to the gradual escape of air molecules from the tire over time. This loss occurs because tires are not perfectly sealed and some air can seep out through tiny gaps in the rubber or valves.

According to the U.S. Department of Energy, tire pressure is defined as the amount of air pressure inside a tire, which is crucial for optimal performance and safety. Proper tire pressure ensures efficient fuel consumption and vehicle handling.

Tire pressure decreases naturally for several reasons. First, all tires have small microscopic pores that allow air molecules to pass through slowly. This is often referred to as “permeation.” Additionally, temperature changes can affect tire pressure; as temperatures drop, the air inside tires contracts, leading to lower pressure. Furthermore, factors such as driving on rough surfaces can also cause air loss over time through wear and tear on the tire’s structure.

Permeation refers to the process by which gas or liquid substances move through a material. In the case of tires, this means air continuously escapes through the rubber surface, even if the tire appears to be intact. The speed of this air loss depends on tire material, temperature, and environmental conditions.

The mechanisms behind natural air loss include molecular motion. Air consists of tiny gas molecules that move randomly. When the tire material has small openings, these molecules can gradually escape, especially under changing temperatures. For instance, as outside air temperatures drop, the colder air causes the air within the tire to contract, which can lead to noticeable drops in pressure.

Specific conditions that contribute to low tire pressure include temperature variations, which can significantly impact air density. For example, the pressure in tires typically decreases by about 1 psi (pound per square inch) for every 10 degrees Fahrenheit decrease in temperature. Additionally, if a tire has damage or improper installation, it may accelerate air loss. Regular checks and maintenance are essential to ensure tires remain inflated properly under varying conditions.

What Are the Signs of Punctures and Leaks in Tires?

The signs of punctures and leaks in tires include visible damage, hissing sounds, and loss of pressure.

  1. Visible Damage
  2. Hissing Sounds
  3. Loss of Pressure
  4. Vibration or Noise
  5. Uneven Wear Patterns

Recognizing these signs is essential for maintaining tire health. Let’s explore each sign in detail.

  1. Visible Damage: Visible damage refers to cuts, punctures, or blisters on the tire’s surface. These imperfections can result from road debris or poor driving conditions. Inspecting tires regularly for any noticeable damage is crucial. A study by the National Highway Traffic Safety Administration (NHTSA) highlights that approximately 10% of tires have some visible defect.

  2. Hissing Sounds: Hissing sounds occur when air escapes from a puncture or cut in the tire. This sound can often alert a driver to a slow leak. According to the American Automobile Association (AAA), any hissing noise should prompt immediate action, as it indicates that the tire is losing air pressure.

  3. Loss of Pressure: Loss of pressure can occur gradually or suddenly. Drivers should monitor tire pressure regularly using a tire pressure gauge. The Rubber Manufacturers Association notes that under-inflated tires can reduce fuel efficiency and increase risk of blowouts.

  4. Vibration or Noise: Vibration or unusual noise during driving can signal tire issues. If a tire has internal damage or is unbalanced, it may cause vibrations. The Vehicle Safety Commission advises seeking professional assistance if vibrations occur, as they can indicate serious tire problems.

  5. Uneven Wear Patterns: Uneven wear patterns on tires can signify misalignment or improper inflation. Checking tires for wear can prevent further issues down the road. According to the Tire Industry Association, properly aligned tires can enhance overall vehicle safety and extending tire life by up to 30%.

Being aware of these signs allows drivers to maintain their tires effectively and ensure safety on the road.

How Can I Troubleshoot the Low Tire Pressure Warning?

To troubleshoot the low tire pressure warning, inspect the tires for damage, check and adjust tire pressure, and consider the temperature effects on tire pressure.

Inspect the Tires: Examine each tire for visible damage such as cuts, punctures, or bulges. Damage can lead to air loss. According to the National Highway Traffic Safety Administration (NHTSA, 2021), approximately 20% of tire failures are due to tire damage.

Check and Adjust Tire Pressure: Use a tire pressure gauge to measure the pressure in each tire. Recommended pressures are typically found on a sticker located inside the driver’s door or in the vehicle’s manual. Inflate or deflate the tires as necessary. The Rubber Manufacturers Association (RMA, 2020) states that underinflated tires can reduce fuel efficiency by up to 3%.

Consider Temperature Effects: Recognize that tire pressure can change with temperature. For every 10°F change in temperature, tire pressure can vary by about 1 psi (pound per square inch). As colder weather sets in, tire pressure may drop. According to the American Automobile Association (AAA, 2019), checking tire pressure regularly during seasonal changes can help maintain vehicle safety and efficiency.

Following these steps can help resolve the low tire pressure warning effectively.

What Steps Do I Take to Properly Check My Tire Pressure?

To properly check your tire pressure, follow these steps: gather necessary tools, check the tire specifications, inspect the tire pressure when tires are cold, use a reliable pressure gauge, compare readings to the recommended levels, inflate or deflate as necessary, and repeat as needed.

  1. Gather necessary tools
  2. Check tire specifications
  3. Inspect pressure when tires are cold
  4. Use a reliable pressure gauge
  5. Compare readings to recommended levels
  6. Inflate or deflate as necessary
  7. Repeat as needed

Understanding tire pressure is critical for vehicle safety and efficiency. Misunderstandings about tire pressure can lead to conflicting views regarding frequency and methodology.

  1. Gather Necessary Tools:
    Gathering necessary tools includes having a tire pressure gauge and an air compressor. A tire pressure gauge measures the air pressure in each tire. An air compressor allows for inflation if the tires are low.

  2. Check Tire Specifications:
    Checking tire specifications means knowing the recommended pressure levels for your vehicle. This information is typically found in the owner’s manual or on a sticker inside the driver’s door. It is important to adhere to these specifications to ensure optimal performance.

  3. Inspect Pressure When Tires Are Cold:
    Inspecting pressure when tires are cold is essential. Tire pressure should be checked before driving or after the car has been parked for at least 3 hours. This allows the tire temperature to stabilize, resulting in an accurate reading.

  4. Use a Reliable Pressure Gauge:
    Using a reliable pressure gauge ensures accuracy. Digital gauges often provide quick and precise readings. It is important to ensure the gauge is calibrated to avoid inaccuracies in tire pressure readings.

  5. Compare Readings to Recommended Levels:
    Comparing readings to recommended levels is a necessary step. If the tire pressure is below the recommended levels, it may lead to poor fuel economy, uneven tire wear, or handling issues.

  6. Inflate or Deflate as Necessary:
    Inflating or deflating as necessary adjusts tire pressure to the recommended levels. Over-inflated tires can cause a harsher ride and reduce contact with the road. Under-inflated tires can increase rolling resistance and may wear out faster.

  7. Repeat as Needed:
    Repeating the process as needed helps maintain proper tire pressure over time. Consistency is key, as frequent checks can prevent potential tire issues and enhance overall vehicle performance.

Following these steps helps ensure your tires are at the correct pressure, improving safety and performance.

How Can I Identify a Tire with a Leak Effectively?

To identify a tire with a leak effectively, you can visually inspect the tire, listen for hissing sounds, use soapy water, and monitor tire pressure regularly. Each method contributes to pinpointing the source of the leak.

  • Visual Inspection: Conduct a thorough visual examination of the tire’s surface. Look for visible signs of damage such as punctures, cuts, or cracks. Pay special attention to the sidewalls and tread, where damage often occurs.
  • Listening for Sounds: In a quiet environment, listen closely to the tire. You may hear a hissing sound, which indicates escaping air. This sound usually helps locate the leak’s position.
  • Soapy Water Method: Prepare a mixture of soap and water. Apply it generously to the tire’s surface using a spray bottle or sponge. Watch for bubbles forming, as they will indicate the presence of air escaping from a puncture or crack. This method is a widely accepted practice, as small leaks can be difficult to detect visually.
  • Regular Tire Pressure Monitoring: Use a tire pressure gauge to check your tire’s pressure regularly. A significant drop in pressure can indicate a slow leak. It is advisable to compare measurements with the recommended tire pressure specified in the vehicle’s manual, which can usually be found on a sticker located inside the driver’s door.

By implementing these strategies, you can effectively detect and locate a tire leak, helping to maintain optimal vehicle performance and safety.

What Solutions Should I Consider for Low Tire Pressure?

To address low tire pressure, you should consider three main solutions: inflating the tires, checking for leaks, and monitoring tire health.

  1. Inflate the Tires
  2. Check for Leaks
  3. Monitor Tire Health

Inflating the Tires:
Inflating the tires is the first solution for low tire pressure. Tires should be filled to the manufacturer’s recommended pressure, usually found on a sticker inside the driver’s door or in the owner’s manual. Regularly checking tire pressure can help prevent issues. According to the National Highway Traffic Safety Administration (NHTSA), properly inflated tires can improve fuel efficiency by 3-5%.

Checking for Leaks:
Checking for leaks involves inspecting the tires for punctures or air loss. You can apply soapy water to the tires. Air bubbles indicate a leak. If a puncture is found, the tire may need repair or replacement. A study by the Tire Industry Association noted that about 30% of all tires have slow leaks.

Monitoring Tire Health:
Monitoring tire health involves assessing tread depth and sidewall integrity. Adequate tread depth ensures sufficient grip on the road. The U.S. Department of Transportation recommends a tread depth of at least 2/32 of an inch for safe driving conditions. If the tires are worn or damaged, replacing them is essential for safety and performance. Research indicates that driving on worn tires increases the risk of accidents, especially in wet conditions.

Should I Inflate or Replace My Tires if They’re Low?

Yes, you should inflate your tires if they’re low. However, inspect them for damage first.

Tires lose pressure due to temperature changes or slow leaks. If the tire is intact and just needs air, inflating it to the recommended pressure will improve performance, safety, and fuel efficiency. If the tire shows signs of wear, uneven tread, or visible damage, such as punctures or cuts, it’s best to replace it. Regularly checking tire pressure and condition helps maintain vehicle safety and performance.

What Maintenance Practices Help Prevent Low Tire Pressure?

To prevent low tire pressure, regular maintenance practices are crucial. These practices ensure optimal tire inflation and enhance vehicle safety and performance.

  1. Regularly check tire pressure
  2. Inspect tires for damage
  3. Rotate tires as recommended
  4. Replace worn-out tires
  5. Maintain proper wheel alignment
  6. Monitor temperature changes
  7. Inspect valve stems

Regularly checking tire pressure is essential, as it can fluctuate with temperature changes and usage. By ensuring proper inflation, drivers can prevent issues related to low tire pressure.

  1. Regularly Check Tire Pressure:
    Regularly checking tire pressure involves using a tire pressure gauge to assess the inflation level of each tire. The recommended pressure varies by vehicle and is usually found on a sticker inside the driver’s door. According to the National Highway Traffic Safety Administration (NHTSA), under-inflated tires can lead to reduced fuel economy and increased tire wear.

  2. Inspect Tires for Damage:
    Inspecting tires for damage includes looking for punctures, cracks, and bulges. Damage can affect tire integrity and lead to air loss. The Rubber Manufacturers Association recommends a monthly inspection to identify potential issues early.

  3. Rotate Tires as Recommended:
    Rotating tires involves changing their position to promote even wear. This practice is typically recommended every 5,000 to 8,000 miles. Uneven wear can lead to lower air retention and compromise pressure levels.

  4. Replace Worn-Out Tires:
    Replacing worn-out tires is crucial for maintaining safe tire pressure. Tread wear indicators, which are built into tires, signal when it’s time for a replacement. The NHTSA states that tires should be replaced when tread depth falls below 2/32 of an inch.

  5. Maintain Proper Wheel Alignment:
    Maintaining proper wheel alignment ensures that all tires make equal contact with the road. Misalignment can lead to uneven tire wear, affecting air retention. The American Automobile Association (AAA) suggests that misalignment is often a cause of low tire pressure.

  6. Monitor Temperature Changes:
    Monitoring temperature changes is important as tire pressure can drop significantly in cold weather. The general rule of thumb is that tire pressure drops by about 1 PSI for every 10°F decrease in temperature. Seasonal changes should prompt regular checks.

  7. Inspect Valve Stems:
    Inspecting valve stems involves checking for cracks or damage that could lead to air leaks. The valve stem is a critical component for maintaining tire pressure. Regular checks can help identify potential leaks before they become a problem.

By implementing these practices, car owners can maintain optimal tire pressure and enhance their vehicle’s overall performance and safety. Consistent attention to tire maintenance contributes significantly to reducing the risk of accidents caused by low tire pressure.

What Do I Need to Know About the TPMS Light?

The TPMS light, or Tire Pressure Monitoring System light, indicates that one or more tires on a vehicle have low air pressure. Ignoring this alert can lead to reduced performance and safety risks.

  1. Purpose of TPMS
  2. Types of TPMS
  3. Causes for Activation
  4. Importance of Proper Tire Pressure
  5. Maintenance Tips

Understanding the different aspects of the TPMS light can help you address tire issues effectively.

  1. Purpose of TPMS: The purpose of TPMS is to enhance vehicle safety by monitoring tire pressure. This system alerts the driver when tire pressure drops significantly. According to the National Highway Traffic Safety Administration (NHTSA), properly inflated tires can improve fuel efficiency and can help extend tire life.

  2. Types of TPMS: There are two types of TPMS: direct and indirect. Direct TPMS uses pressure sensors in each tire to transmit real-time data. Indirect TPMS estimates tire pressure by comparing wheel speed sensors, which detect differences in tire rotation. Most modern vehicles are equipped with direct TPMS, which provides more accurate readings.

  3. Causes for Activation: The TPMS light can activate due to various reasons, such as under-inflated tires, temperature changes, or tire damage. Tire pressure often decreases in colder weather; for every 10 degrees Fahrenheit drop, tire pressure can fall by about 1 PSI (pound per square inch). Additionally, a slow leak or punctured tire can trigger the TPMS warning.

  4. Importance of Proper Tire Pressure: Maintaining proper tire pressure is crucial for safety and vehicle efficiency. Under-inflated tires can lead to decreased traction, increased braking distance, and higher fuel consumption. The Rubber Manufacturers Association (RMA) reports that proper tire inflation can improve fuel efficiency by up to 3.3%. Inadequate pressure can also lead to premature tire wear and blowouts.

  5. Maintenance Tips: Regular maintenance of tire pressure is essential. Check your tire pressure at least once a month and before long trips. Use a reliable tire pressure gauge for accuracy. The correct tire pressure is usually found on a sticker located on the driver’s door jamb or in the owner’s manual. Ensure all tires, including the spare, are inflated to the recommended levels. Regularly inspect tires for wear, damage, or objects lodged in the tread, as they can lead to air loss.

How Does the TPMS Function for Monitoring Tire Pressure?

The tire pressure monitoring system (TPMS) functions by continuously checking the air pressure in each tire. It consists of two main components: direct sensors and an onboard computer. Direct sensors are located inside each tire and measure the tire’s air pressure in real-time. They send this information wirelessly to the vehicle’s onboard computer.

When the air pressure in a tire drops below the manufacturer’s recommended level, the sensor detects the change. The onboard computer receives this signal and activates the TPMS warning light on the dashboard. This alerts the driver to check the tire pressure.

To maintain accurate monitoring, the TPMS also requires regular maintenance. Drivers must inspect tire pressure, check for sensor battery life, and recalibrate the system after tire rotations or replacements. This proactive approach ensures that the TPMS continues to function correctly and alerts drivers to potential tire issues.

What Actions Should I Take If the TPMS Light Remains On?

If the TPMS (Tire Pressure Monitoring System) light remains on, you should take immediate action to address potential tire issues.

  1. Check tire pressure for all tires.
  2. Inspect tires for visible damage or wear.
  3. Reset the TPMS if you have manually adjusted the tire pressure.
  4. Consult your vehicle’s manual for specific instructions.
  5. Visit a tire specialist or mechanic for professional assessment.
  6. Review the vehicle’s warranty for tire-related issues.

Understanding the actions to take in response to a constant TPMS light can be crucial for your vehicle’s safety and performance.

  1. Check Tire Pressure for All Tires:
    Checking tire pressure involves using a tire pressure gauge. This tool measures the air pressure inside the tire, which should match the recommended PSI (pounds per square inch) listed on the driver’s side door jamb or vehicle manual. Low tire pressure can lead to decreased handling and increased tire wear. According to the NHTSA, driving on underinflated tires can reduce fuel efficiency by 0.2% for every 1 PSI drop in pressure.

  2. Inspect Tires for Visible Damage or Wear:
    Inspecting tires means examining them visually for any signs of wear, such as bald spots, cracks, or punctures. This is important because damaged tires become unsafe, especially at high speeds. According to the Tire Industry Association, checking for tread depth is also essential. A penny test can determine tread depth: insert a penny into the tread with Lincoln’s head facing down; if you see all of Lincoln’s head, it’s time for new tires.

  3. Reset the TPMS if You Have Manually Adjusted the Tire Pressure:
    Resetting the TPMS usually involves following specific procedures in your vehicle’s manual. Some vehicles require you to drive for a certain distance or press a reset button after adjusting tire pressures. Failing to reset the system can result in false alerts or a continuous warning light.

  4. Consult Your Vehicle’s Manual for Specific Instructions:
    Consulting the manual ensures you follow the correct procedures tailored to your specific make and model. Vehicle manufacturers design TPMS systems differently, leading to variations in reset methods. Understanding these nuances can help effectively troubleshoot and resolve issues related to the TPMS light.

  5. Visit a Tire Specialist or Mechanic for Professional Assessment:
    Visiting a professional provides access to specialized equipment for more thorough diagnostics. Tire specialists can verify whether the TPMS sensors are functioning correctly and check for internal problems that may not be evident through basic checks. Many tire shops offer free consultations or tire pressure checks.

  6. Review the Vehicle’s Warranty for Tire-Related Issues:
    Reviewing the warranty may uncover coverage for tire problems related to defects or performance issues. Manufacturers sometimes include stipulations about tire replacement or repairs during the warranty period. Knowing your warranty details allows you to take appropriate action without incurring unnecessary costs.

Taking swift and informed actions when the TPMS light remains on helps ensure your safety on the road and prolongs the life of your tires.

Related Post:

Leave a Comment