Valvoline provides a free tire pressure check during its complimentary 18-point maintenance check with every oil change. This service is beneficial, especially in cold weather when tire pressure can drop. Remember, this offer is valid only at participating locations and for accessible items.
Customers benefit from this complimentary service. It promotes vehicle safety by ensuring that tires are inflated to the manufacturer’s recommended levels. Valvoline’s technicians use precise tools to measure tire pressure and can recommend adjustments if necessary.
This service reflects Valvoline’s commitment to customer satisfaction and vehicle maintenance. Offering a free tire pressure check alongside oil changes creates a one-stop solution for car care. Customers can drive away with both engine and tire health addressed, enhancing overall vehicle performance.
Understanding the importance of tire care is vital for every driver. Regular checks can prevent unexpected issues and contribute to longevity. As we delve deeper, it’s beneficial to explore other complimentary services provided by Valvoline. These services can further enhance vehicle performance and offer peace of mind to customers seeking comprehensive maintenance solutions.
Does Valvoline Offer Free Tire Pressure Checks with Oil Changes?
Yes, Valvoline does offer free tire pressure checks with oil changes. This service helps ensure that your tires are properly inflated, promoting safety and efficiency.
The free tire pressure check provides customers with valuable insight into their vehicle’s health. Proper tire pressure enhances fuel efficiency, improves tire lifespan, and increases safety while driving. Valvoline performs this check as a part of their oil change service to address potential issues that could lead to costly repairs or unsafe driving conditions. It also encourages regular vehicle maintenance, which is essential for optimal performance.
What Types of Oil Change Services Does Valvoline Provide?
Valvoline provides several types of oil change services tailored to different customer needs.
- Standard Oil Change
- Full Synthetic Oil Change
- High Mileage Oil Change
- Synthetic Blend Oil Change
- Diesel Oil Change
These services cater to various vehicle types and oil preferences, ensuring that customers receive the right maintenance tailored to their specific needs. Understanding the differences between these options can help drivers make informed decisions about their vehicle maintenance.
-
Standard Oil Change:
Valvoline’s standard oil change involves replacing the old oil with new conventional oil. This service typically includes an oil filter replacement and a complete vehicle inspection. The use of conventional oil is suitable for vehicles with lower mileage and standard driving conditions, as it meets the basic performance requirements. -
Full Synthetic Oil Change:
A full synthetic oil change at Valvoline provides advanced engine protection. Full synthetic oil is engineered for high-performance vehicles or those operating in extreme temperatures. This type of oil improves fuel efficiency and reduces engine wear. According to Valvoline, full synthetic oil lasts longer than conventional oil, often allowing for extended intervals between changes. -
High Mileage Oil Change:
Valvoline’s high mileage oil change is designed for vehicles with over 75,000 miles. This service uses specially formulated oil that includes additives to protect aging engines. The high mileage oil helps reduce oil consumption, minimize leaks, and decrease engine wear. It is a proactive approach to maintaining older vehicles and ensuring their optimal performance. -
Synthetic Blend Oil Change:
A synthetic blend oil change combines both synthetic and conventional oils. Valvoline offers this option for customers seeking properties of both types, such as improved engine efficiency and protection against high temperatures. Synthetic blends provide better performance than conventional oil alone while still being more affordable than full synthetic options. -
Diesel Oil Change:
Valvoline also provides oil change services specifically for diesel engines. This service uses diesel-specific oils that contain additives tailored to diesel performance requirements. It is crucial for maintaining the health of diesel engines, which operate under different conditions than gasoline engines.
Valvoline offers a variety of oil change services to ensure customers have options that suit their vehicles’ specific needs. Each service option is designed with distinct characteristics that help maintain engine health and performance.
How Often Should You Get Your Tire Pressure Checked?
You should get your tire pressure checked at least once a month. Regular checks help ensure tire safety and performance. Tires can naturally lose air over time, which can lead to under-inflation. This situation may cause poor fuel efficiency, uneven tire wear, and increased risk of blowouts. Seasonal temperature changes can also affect tire pressure. Tires generally lose about 1 PSI (pound per square inch) of pressure for every 10°F drop in temperature. Additionally, check your tire pressure before long trips. This practice promotes optimal handling and safety on the road. Always refer to your vehicle’s owner manual for specific recommendations on tire pressure.
What Are the Risks of Ignoring Tire Pressure Maintenance?
Ignoring tire pressure maintenance poses several risks that can compromise vehicle safety and performance.
- Increased tire wear
- Decreased fuel efficiency
- Reduced vehicle handling
- Increased risk of blowouts
- Unsafe driving conditions
Ignoring tire pressure maintenance can lead to several significant consequences.
-
Increased Tire Wear: Ignoring tire pressure leads to uneven wear on tires. Underinflated tires wear more on the edges, while overinflated tires wear more in the center. According to the National Highway Traffic Safety Administration (NHTSA), proper tire inflation can extend tire life by 25% or more. For example, a study by Tire Rack found that maintaining optimal pressure can increase tread life significantly.
-
Decreased Fuel Efficiency: Low tire pressure increases rolling resistance, making the engine work harder. This leads to reduced fuel efficiency. The U.S. Department of Energy states that keeping tires inflated to the recommended pressure can improve fuel economy by 3% or more. In a practical example, a vehicle with underinflated tires can consume an additional $200 in fuel costs per year.
-
Reduced Vehicle Handling: Improper tire pressure can negatively affect a vehicle’s handling and stability. Underinflated tires can create sluggish handling, while overinflated tires may lead to a less connected feel to the road. In a study published by the University of Michigan Transportation Research Institute, researchers found that properly inflated tires improve response times and overall handling.
-
Increased Risk of Blowouts: Ignoring tire pressure can result in blowouts. Underinflated tires generate more heat due to friction, which increases the likelihood of catastrophic failure. The NHTSA reports that approximately 10,000 accidents each year are attributed to tire blowouts. An example is the widely publicized 2000 Ford Explorer rollover incidents linked to tire blowouts caused by prolonged underinflation.
-
Unsafe Driving Conditions: Low tire pressure can compromise overall vehicle safety. Decreased traction can lead to accidents, particularly in wet or icy conditions. A study from the American Automobile Association (AAA) found that underinflated tires are more prone to loss of control, especially during emergency maneuvers.
Maintaining proper tire pressure is essential for safety, cost efficiency, and optimal vehicle performance. Regularly checking and adjusting tire pressure is a simple yet crucial vehicle maintenance task.
What Advantages Do You Get from Checking Tire Pressure at Valvoline?
Checking tire pressure at Valvoline offers several advantages.
- Professional expertise
- Convenience of service
- Safety enhancement
- Cost savings on fuel
- Tire longevity
- Easy access to additional services
The advantages mentioned provide both immediate benefits and long-term value for vehicle maintenance.
-
Professional Expertise: Checking tire pressure at Valvoline means benefiting from the knowledge of trained technicians. These professionals are skilled in identifying issues that a regular driver might overlook. According to the Tire Industry Association, proper tire pressure maintenance can improve your vehicle’s safety significantly.
-
Convenience of Service: Valvoline locations are often easily accessible, allowing for quick tire pressure checks without the need for appointments. This convenience fits well into a busy schedule and helps drivers maintain their vehicles without extra hassle.
-
Safety Enhancement: Regularly monitoring tire pressure leads to safer driving conditions. Under-inflated tires can cause blowouts and loss of vehicle control. The National Highway Traffic Safety Administration states that proper tire maintenance reduces the likelihood of accidents caused by tire failure.
-
Cost Savings on Fuel: Properly inflated tires can enhance fuel efficiency. According to the U.S. Department of Energy, keeping tires inflated to the recommended pressure can improve fuel economy by 0.6% to 3%, which adds up to significant savings over time.
-
Tire Longevity: Checking tire pressure regularly can extend the life of tires. Proper inflation reduces uneven wear and tear, prolonging the time before tires need replacement. The Rubber Manufacturers Association emphasizes that maintaining correct tire pressure can increase tire lifespan by approximately 5,000 miles.
-
Easy Access to Additional Services: Valvoline often provides additional vehicle maintenance services beyond tire pressure checks. Customers can conveniently address other maintenance issues at the same location, creating a one-stop service experience.
In conclusion, checking tire pressure at Valvoline not only ensures better vehicle performance but also improves safety and can lead to significant cost savings.
How Do You Check Your Tire Pressure at Home?
You can check your tire pressure at home by using a tire pressure gauge, ensuring the tires are cold, and comparing the readings to the manufacturer’s recommended pressure.
To perform this task effectively, follow these detailed steps:
-
Get a Tire Pressure Gauge: Obtain a reliable tire pressure gauge from an auto parts store or online. There are digital, dial, and pencil-style gauges available. Digital gauges often provide the most accurate readings.
-
Check Tire Temperature: Measure tire pressure when tires are cold. This typically means the vehicle has been parked for at least three hours or has been driven less than a mile at moderate speed. Hot tires can give inflated readings, leading to inaccuracies.
-
Remove Valve Stem Cap: Locate the valve stem on each tire, which is a small rubber or metal tube protruding from the tire. Take off the cap by twisting it counterclockwise. Keep the cap in a safe place to avoid losing it.
-
Press the Gauge onto the Valve Stem: Firmly press the tire pressure gauge onto the valve stem. Ensure a good seal between the gauge and the valve to prevent air from escaping.
-
Read the Pressure: Check the gauge reading immediately. For digital gauges, the reading will display on the screen. For dial or pencil gauges, read the measurement marked on the dial or the pencil’s tip.
-
Compare to Recommended Pressure: Find the manufacturer’s recommended tire pressure, usually located on a sticker inside the driver’s side door or in the owner’s manual. Tire pressure is usually measured in pounds per square inch (PSI).
-
Inflate or Deflate as Necessary: If the tire pressure is below the recommended level, add air using an air compressor. If it’s too high, release air until you reach the correct pressure.
-
Replace Valve Stem Cap: After taking the readings and adjusting pressure, replace the valve stem cap by screwing it back on clockwise. It ensures no dirt enters the valve stem.
Regularly checking your tire pressure helps maintain optimal tire performance and enhances safety. The U.S. Department of Transportation recommends checking tire pressure monthly. Properly inflated tires also improve fuel efficiency and may extend the lifespan of the tires.
What Tools Are Required for Checking Tire Pressure?
To check tire pressure accurately, you need a tire pressure gauge, a reliable air compressor, and sometimes a valve stem tool for adjustments.
- Tire pressure gauge
- Air compressor
- Valve stem tool
Before delving deeper, it’s essential to understand that various tools serve different aspects of tire pressure maintenance. Each tool provides specific functions that can contribute to tire safety and performance.
-
Tire Pressure Gauge: A tire pressure gauge measures the air pressure inside a tire. It can be digital or analog. The ideal tire pressure varies by vehicle, but the gauge enables accurate readings to ensure tires are neither overinflated nor underinflated. Many believe that regular use of a tire pressure gauge enhances vehicle safety and fuel efficiency. A 2019 study by the National Highway Traffic Safety Administration highlighted that proper tire pressure can improve fuel economy by up to 3% and extend tire life by 10,000 miles.
-
Air Compressor: An air compressor is necessary for inflating tires when they are under the recommended pressure. Portable air compressors are convenient and allow for easy adjustments anywhere. According to Tire Review, using an air compressor at home can save time and is cost-effective compared to visiting a gas station. However, some people might argue that frequent adjustments can lead to overkill, particularly if tire pressure is monitored and maintained regularly.
-
Valve Stem Tool: A valve stem tool is used to remove and install the valve core of a tire. This tool can help in repairing tires that may have a slow leak by allowing for easy access to the valve. While fewer individuals might use this tool frequently, it serves as an important accessory for those who perform their tire maintenance. Some opinions suggest it should be standard in tire repair kits because of its usefulness in dealing with minor tire issues.
In conclusion, a tire pressure gauge, air compressor, and valve stem tool are fundamental tools for checking and maintaining proper tire pressure, which is vital for safe and efficient driving.
What Other Services Can You Expect at Valvoline?
Valvoline offers a variety of services beyond oil changes, catering to various vehicle maintenance needs.
- Oil Change Services
- Fluid Services
- Preventive Maintenance
- Tire Services
- Emission Services
- Battery Services
- Wiper Blade Replacement
- Radiator Services
Each of these services plays a significant role in vehicle care and helps extend the life of your car. Let’s explore each service in detail.
-
Oil Change Services:
Valvoline provides oil change services using high-quality motor oil. Customers can choose between standard oil changes and full synthetic options. Regular oil changes help keep engines clean and running smoothly. -
Fluid Services:
Fluid services include checking and replacing important fluids like transmission fluid, brake fluid, and coolant. Regular maintenance of these fluids ensures optimal performance and can prevent serious mechanical failures. -
Preventive Maintenance:
Preventive maintenance encompasses a variety of checks and services that aim to catch issues before they become major problems. This can include a complete vehicle inspection, tire rotations, and air filter replacements. -
Tire Services:
Valvoline offers tire rotation, balancing, and pressure checks. Regular tire maintenance enhances safety and performance. Correct pressure can also improve fuel efficiency. -
Emission Services:
Valvoline provides emissions testing and repair services to ensure vehicles meet environmental regulations. Keeping emissions equipment functioning correctly reduces harmful pollutants. -
Battery Services:
Battery services include testing and installation of batteries. A healthy battery is crucial for vehicle reliability, especially in harsh weather conditions. -
Wiper Blade Replacement:
Wiper blade replacement ensures clear visibility in inclement weather. An essential service, especially before rainy or snowy seasons. -
Radiator Services:
Radiator services involve checking the coolant levels and flushing the system to prevent overheating. Proper radiator care is vital for maintaining engine temperature.
Valvoline’s broad range of services supports vehicle longevity and optimal performance. Regular maintenance at Valvoline can save money on repairs and ensure safe driving experiences.
Related Post: