To reset the tire pressure sensor on a 2017 Chevy Cruze, go to Tire Pressure Monitor System. Press and hold the checkmark button on the steering wheel until it begins resetting. Use a reset tool near each tire valve in this order: driver, passenger, rear passenger, and rear driver. You’ll hear a beep for each successful reset and a multi-beep when finished.
Next, locate the TPMS reset button beneath the dashboard or near the steering wheel. Press and hold the reset button until the TPMS warning light blinks twice, indicating the system is resetting. Release the button. Drive the vehicle for about 10 to 15 minutes at speeds over 25 mph. This action allows the TPMS to recalibrate and recognize the new tire pressures.
After completing these steps, verify that the TPMS warning light turns off. If it remains illuminated, recheck the tire pressures or consult a professional for further assistance.
Understanding how to reset the tire pressure sensor is essential for maintaining vehicle safety. Next, we will delve into troubleshooting common TPMS issues that drivers may encounter.
What Is the Tire Pressure Monitoring System (TPMS) in a 2017 Chevy Cruze?
The Tire Pressure Monitoring System (TPMS) in a 2017 Chevy Cruze is a safety feature designed to monitor the air pressure in the vehicle’s tires. It alerts the driver when tire pressure falls below a specified level, enhancing safety and vehicle performance.
According to the National Highway Traffic Safety Administration (NHTSA), TPMS is mandatory in all vehicles manufactured since 2008 to improve road safety. This system serves to prevent tire blowouts and improve fuel efficiency by ensuring optimal tire pressure.
The TPMS consists of sensors installed in each tire, which transmit real-time data to the vehicle’s onboard computer. The system activates a warning light on the dashboard when it detects low pressure in a tire. This feature emphasizes the importance of maintaining correct tire pressure for handling, braking, and overall vehicle safety.
Consumer Reports defines TPMS as an essential tool for reducing the risk of accidents caused by under-inflated tires. This system plays a crucial role in vehicle maintenance and encourages drivers to inspect and care for their tires regularly.
Low tire pressure can result from natural air loss, temperature changes, and punctures. Other factors include poor maintenance practices and faulty sensors.
According to the NHTSA, under-inflated tires can reduce fuel efficiency by 0.2% for every 1 PSI drop in pressure. Proper tire pressure is critical for optimal fuel economy and vehicle performance.
TPMS contributes to road safety by preventing accidents related to tire failure. It also provides economic benefits by improving fuel efficiency and reducing wear on the tires.
Improper tire pressure can lead to increased greenhouse gas emissions, affecting the environment. Furthermore, the associated economic costs from accidents and repairs can strain personal finances and healthcare systems.
For example, a study by the Tire Industry Association revealed that maintaining proper tire pressure could save consumers an average of $0.10 per gallon of gas. This translates to significant savings over time for regular drivers.
To address TPMS-related issues, the NHTSA recommends regular tire maintenance, including pressure checks and inspections. Drivers should familiarize themselves with TPMS alerts and monitor tire conditions proactively.
Implementing technologies such as direct TPMS, which uses sensors to measure pressure in real-time, is essential. Additionally, routine checks can ensure that tires are properly inflated and safe for use.
What Are the Signs Indicating a Tire Pressure Sensor Needs Resetting?
The signs indicating a tire pressure sensor needs resetting include a constantly illuminated warning light, fluctuating tire pressure readings, and a reset button being activated without any physical tire changes.
- Constantly Illuminated Warning Light
- Fluctuating Tire Pressure Readings
- Reset Button Activation Without Physical Changes
The presence of these signs often leads to questions about the functionality and reliability of the tire pressure monitoring system (TPMS). Understanding each sign helps determine if reset is necessary and if further investigation is warranted.
-
Constantly Illuminated Warning Light: The sign of a constantly illuminated warning light indicates that there is an issue with the tire pressure monitoring system. This could mean one or more tires are under-inflated or there is a malfunction in the sensor. According to the National Highway Traffic Safety Administration (NHTSA), this light is programmed to activate when tire pressure falls below 25% of the recommended level. If the light remains on even after addressing the tire pressure, it may suggest a need for resetting the sensor or further mechanical investigation.
-
Fluctuating Tire Pressure Readings: Fluctuating tire pressure readings mean that the displayed tire pressures vary significantly or do not seem accurate. This inconsistency can indicate a problem with the sensors, such as dirt or damage, that may require a reset to recalibrate the sensor’s readings. The Tire Industry Association notes that tire pressure can change with temperature or can be influenced by a malfunctioning sensor. Thus, if the readings fluctuate drastically after you have confirmed proper tire inflation, a reset may be necessary.
-
Reset Button Activation Without Physical Changes: A reset button activated without any physical changes to tire pressure or conditions indicates that the TPMS may need to be recalibrated. Many vehicles have a dedicated button for this purpose. Ignoring this prompt may lead to ongoing inaccuracies in tire pressure monitoring. Car manufacturers recommend resetting the TPMS after any tire maintenance, despite it seeming unnecessary when the pressures seem normal.
By recognizing these signs, vehicle owners can effectively determine when a tire pressure sensor needs resetting while ensuring their safety on the road.
How Do You Access the TPMS Reset Button in a 2017 Chevy Cruze?
You can access the TPMS reset button in a 2017 Chevy Cruze by following a few simple steps, including locating the button and performing the reset procedure.
-
Locate the TPMS Reset Button:
– The TPMS (Tire Pressure Monitoring System) reset button is usually found beneath the steering wheel, close to the section where the lever for the headlights is located. -
Turn on the Ignition:
– Insert the key into the ignition and turn it to the “On” position without starting the engine. This allows the vehicle’s electronics to activate, including the TPMS system. -
Press the TPMS Reset Button:
– Press and hold the TPMS reset button until the TPMS indicator light blinks three times. This indicates that the system is resetting. -
Check the Tire Pressure:
– After releasing the button, ensure that all four tires are inflated to the recommended pressure levels as specified in the owner’s manual or on the driver’s door jamb. This is crucial for the TPMS to function correctly. -
Start the Vehicle:
– Start the engine and allow it to run for a few minutes. This will give the TPMS time to complete the reset process. The TPMS light on the dashboard should turn off if the reset was successful. -
Monitor TPMS Indicator:
– If the TPMS light remains illuminated, it may indicate that the tire pressure in one or more tires is still low or that there is another issue with the TPMS. It is advisable to check tire pressures again or consult a professional mechanic.
Following these steps will help you reset the TPMS in your 2017 Chevy Cruze effectively.
What Steps Should You Follow to Reset the Tire Pressure Sensor After Adjusting Tire Pressure?
To reset the tire pressure sensor after adjusting tire pressure, you typically need to follow a series of steps that may vary by vehicle model.
- Ensure all tires are inflated to the recommended pressure.
- Turn on the vehicle’s ignition without starting the engine.
- Locate the TPMS reset button, usually found beneath the steering wheel or in the glove compartment.
- Press and hold the reset button until the TPMS light blinks three times.
- Start the vehicle and wait for the TPMS warning light to turn off.
- Drive the vehicle for a short distance to complete the reset.
Understanding the varying practices for resetting tire pressure sensors is important, as methods may differ based on the vehicle make and model.
- Ensure all tires are inflated to the recommended pressure:
Ensuring all tires are inflated to the recommended pressure is essential before resetting the tire pressure monitoring system (TPMS). Each vehicle has a recommended tire pressure found on a sticker inside the driver’s door or in the owner’s manual. It is crucial to check that all four tires are properly inflated according to these specifications.
Inflating tires to the correct pressure helps in achieving optimal performance, fuel efficiency, and tire longevity. Maintaining proper tire pressure can also enhance vehicle safety. A study by the National Highway Traffic Safety Administration in 2013 showed that under-inflated tires significantly increase the risk of tire blowouts, contributing to road accidents.
- Turn on the vehicle’s ignition without starting the engine:
Turning on the vehicle’s ignition without starting the engine powers the dashboard electronics, including the TPMS lights. This step begins the reset procedure and allows the system to recognize tire pressure changes after adjustments have been made.
The ignition position should typically be ‘On’ but not ‘Start’. This distinction is essential, as starting the engine could trigger other systems unrelated to the TPMS. Following the correct ignition positions ensures a smooth reset process.
- Locate the TPMS reset button:
Locating the TPMS reset button is critical for the reset process. The button is often found beneath the steering wheel, near the brake pedal, or in the vehicle’s glove compartment. Some newer models do not have a physical reset button and may require a software-based reset through the onboard computer or a diagnostic tool.
For example, Honda models may use a button, while Tesla vehicles require a reset through the dashboard interface. Knowing your specific model’s requirements simplifies the procedure.
- Press and hold the reset button until the TPMS light blinks three times:
Pressing and holding the reset button until the TPMS light blinks three times initiates the reset of the system. This action signals to the vehicle that you have adjusted the tire pressures and instructs the TPMS to update its memory.
A blinking light indicates that the system is actively resetting. If the light does not blink after pressing the button, it may suggest an issue with the sensor or that proper pressures weren’t set beforehand.
- Start the vehicle and wait for the TPMS warning light to turn off:
Starting the vehicle and waiting for the TPMS warning light to turn off confirms that the reset was successful. If the light turns off after a short drive, the TPMS has recognized the new tire pressures.
However, if the light remains illuminated, it may signal a persistent issue, such as a faulty sensor or a significant pressure difference. According to the Tire Industry Association, continued light activation should prompt further investigation into potential tire or sensor issues.
- Drive the vehicle for a short distance to complete the reset:
Driving the vehicle for a short distance to complete the reset helps in recalibrating the system. The TPMS requires motion to register the pressures accurately.
An approximate driving duration of 10 to 15 minutes is generally effective for the recalibration process. Monitoring the TPMS light during this period ensures that all systems have aligned correctly.
Following these steps ensures proper monitoring of tire pressure, which is vital for vehicle safety and performance.
What Should You Do If the Tire Pressure Sensor Warning Light Stays On After Resetting?
If the tire pressure sensor warning light stays on after resetting, you should first check the tire pressures. Then, consider potential sensor malfunctions or the need for a system recalibration.
Key considerations include:
- Check tire pressures.
- Inspect for damaged sensors.
- Recalibrate the Tire Pressure Monitoring System (TPMS).
- Examine for issues within the vehicle’s electrical system.
- Seek professional diagnosis.
To ensure your vehicle’s safety and performance, it’s vital to address these points.
-
Check Tire Pressures:
Checking tire pressures involves verifying that all tires are inflated to the recommended levels. This standard ensures optimal vehicle performance and safety. The correct tire pressure is usually found on a label inside the driver’s door or in the owner’s manual. Under-inflated or over-inflated tires can lead to system errors, hence this step is crucial. A study from the National Highway Traffic Safety Administration indicates that nearly 25% of vehicles have at least one tire under-inflated by 8 psi or more, which can trigger sensor warnings. -
Inspect for Damaged Sensors:
Inspecting for damaged sensors includes looking for physical damage on the tire pressure sensors. These sensors are typically located inside the tire or on the valve stem. Damage can result from road hazards or improper tire installation. According to a 2019 report by the Tire Industry Association, roughly 5% of tire pressure sensors fail due to environmental factors like corrosion or battery depletion. -
Recalibrate the Tire Pressure Monitoring System (TPMS):
Recalibrating the TPMS is essential if tire pressures are correct but the warning light persists. This process may vary by vehicle make and model. Generally, it involves a specific procedure that can include driving the vehicle at certain speeds or using a special TPMS scan tool. The National Automotive Service Task Force notes that proper recalibration can resolve many sensor issues effectively. -
Examine for Issues within the Vehicle’s Electrical System:
Examining the vehicle’s electrical system involves checking the connections and fuses related to the TPMS. Electrical problems can prevent the sensor from signaling correctly. A malfunctioning battery or poor connections can cause warning lights to remain illuminated. The Automotive Maintenance and Repair Association has cited electrical system issues as common reasons for persistent warnings in several vehicles. -
Seek Professional Diagnosis:
Seeking professional diagnosis involves consulting a qualified mechanic or dealership for advanced troubleshooting. Technicians can utilize specialized diagnostic equipment to determine the root cause of the warning light. Research from the Institute of Automotive Engineering indicates that professional diagnostics can resolve 90% of complex TPMS-related issues that are not apparent through visual inspections.
What Common Mistakes Should You Avoid When Resetting the Tire Pressure Sensor on a Chevy Cruze?
To reset the tire pressure sensor on a Chevy Cruze, avoid these common mistakes.
- Ignoring the owner’s manual
- Resetting without proper tire pressure adjustment
- Neglecting to check for tire leaks
- Failing to turn the ignition on without starting the engine
- Using incorrect reset procedures for your specific model year
These key points highlight the crucial aspects of effectively resetting the tire pressure sensor. Understanding these points will help prevent unnecessary issues and ensure a smooth reset process.
-
Ignoring the Owner’s Manual:
Ignoring the owner’s manual leads to incorrect procedures during the reset process. The manual provides specific instructions tailored to the Chevy Cruze model. Failure to follow these instructions can result in misunderstanding how to properly reset the tire pressure sensor, leading to ongoing warning lights and issues with tire monitoring. The National Highway Traffic Safety Administration emphasizes the importance of referring to the manual for maintenance procedures. -
Resetting Without Proper Tire Pressure Adjustment:
Resetting the tire pressure sensor without adjusting the tire pressure first can cause inaccurate readings. The tire pressure needs to be set according to the manufacturer’s recommended specifications before a reset. If the pressure is not correct, the system will not function properly, resulting in potential safety risks. A study by Tire Industry Association highlights that maintaining correct tire pressure enhances fuel efficiency and safety. -
Neglecting to Check for Tire Leaks:
Neglecting to check for tire leaks before resetting the sensor can compromise safety. If there is a leak, tire pressure will drop again, reactivating the warning light. It’s vital to properly inspect the tires for leaks or damage before conducting a reset. The Consumer Product Safety Commission warns that driving on under-inflated tires increases the risk of blowouts and reduces vehicle handling. -
Failing to Turn the Ignition On Without Starting the Engine:
Failing to turn the ignition on (without starting the engine) can result in an unsuccessful sensor reset. The system needs power to register the new settings. Turning the ignition without starting the vehicle ensures the reset process can be initiated properly. According to General Motors guidelines, following the ignition sequence properly is crucial in resetting systems in their vehicles. -
Using Incorrect Reset Procedures for Your Specific Model Year:
Using incorrect reset procedures can lead to failure in resetting the tire pressure sensor. Different model years of the Chevy Cruze may have varied procedures. Ensuring the correct method per the specific model year is essential for efficacy. A report by J.D. Power emphasizes the need for accurate model-specific information for maintaining vehicle features effectively.
What Benefits Can You Expect from Properly Resetting Your Tire Pressure Sensor in a 2017 Chevy Cruze?
Properly resetting your tire pressure sensor in a 2017 Chevy Cruze can enhance vehicle safety, improve fuel efficiency, and prolong tire life.
- Benefits of Properly Resetting the Tire Pressure Sensor:
– Improved fuel efficiency
– Enhanced safety
– Increased tire longevity
– Accurate tire pressure readings
– Prevention of premature tire wear
Resetting the tire pressure sensor offers multiple advantages that can directly affect driving experience and vehicle maintenance.
-
Improved Fuel Efficiency:
Improved fuel efficiency results from properly inflated tires. According to the U.S. Department of Energy, maintaining proper tire pressure can improve fuel economy by up to 3%. When tire pressure is optimal, rolling resistance decreases, allowing the vehicle to consume less fuel for the same distance. -
Enhanced Safety:
Enhanced safety comes from having properly inflated tires. The National Highway Traffic Safety Administration (NHTSA) states that under-inflated tires can lead to blowouts and loss of vehicle control. By ensuring the tire pressure sensor is correctly reset, drivers can monitor tire conditions more accurately, reducing the risk of accidents. -
Increased Tire Longevity:
Increased tire longevity is achieved when tires are properly inflated. The Rubber Manufacturers Association notes that maintaining correct tire pressure can extend tire life by up to 25%. This means fewer replacements and reduced overall vehicle maintenance costs. -
Accurate Tire Pressure Readings:
Accurate tire pressure readings are a critical benefit of resetting the tire pressure sensor. With a correctly functioning Tire Pressure Monitoring System (TPMS), drivers receive timely alerts if tire pressure deviates from the recommended levels. This encourages regular checks and proactive maintenance. -
Prevention of Premature Tire Wear:
Prevention of premature tire wear is another significant benefit. Uneven tire wear caused by incorrect pressures can lead to the necessity of earlier replacement. Properly resetting the tire pressure sensor helps maintain even wear patterns, extending the lifespan of tires.
Properly resetting the tire pressure sensor in your 2017 Chevy Cruze is not just a simple maintenance task; it has far-reaching effects on vehicle performance and safety.
Related Post: