Resetting Low Tire Pressure Light: How To Clear TPMS On 2017 Silverado LTZ [Update On 2024]

To reset the low tire pressure light on a 2017 Silverado LTZ, drive at or above 50 mph for 10 minutes. After that, turn the key to the “On” position without starting the engine. Press and hold the TPMS reset button until the tire pressure light blinks three times, then release the button.

Next, locate the TPMS button, typically found beneath the steering column or on the dashboard. Press and hold this button until the tire pressure light blinks three times. Release the button, and the light should turn off.

If the light remains on, you may need to drive the vehicle for several miles at a speed above 30 mph. This action helps the system recalibrate.

If the low tire pressure light does not clear, inspect the tires for leaks or damage, as a malfunctioning tire pressure monitoring system (TPMS) sensor may also be the issue.

Resolving this light not only enhances safety but also improves fuel efficiency. Understanding the TPMS can lead to better vehicle maintenance. Next, we will explore how to diagnose and address common problems with the TPMS to ensure optimal performance.

Table of Contents

What Is the Tire Pressure Monitoring System (TPMS) on the 2017 Silverado LTZ?

The Tire Pressure Monitoring System (TPMS) on the 2017 Silverado LTZ is a safety feature that alerts the driver when tire pressure is too low. This system monitors the air pressure in the tires and provides real-time information to enhance vehicle safety and efficiency.

According to the National Highway Traffic Safety Administration (NHTSA), TPMS is designed to warn drivers when a tire is significantly under-inflated, which can compromise vehicle control and increase the risk of a crash.

The TPMS consists of sensors placed inside each tire. These sensors continuously measure tire pressure and relay the information to the vehicle’s onboard computer. If the pressure drops below a preset threshold, the system activates a warning light on the dashboard.

The tire pressure threshold varies by vehicle and can generally be defined as 25% below the recommended pressure. The NHTSA specifies that maintaining proper tire pressure can improve fuel efficiency and tire life while enhancing overall vehicle safety.

Statistics show that properly inflated tires can improve fuel efficiency by up to 3%, as indicated by the American Automobile Association (AAA). Lack of maintenance can result in increased tire wear, leading to premature replacement and associated costs.

Low tire pressure can lead to tire blowouts, reduced traction, and increased braking distance. This scenario poses dangers to both the driver and others on the road, emphasizing the need for proper tire care.

To counteract risks associated with low tire pressure, experts recommend regular tire maintenance, checking tire pressure monthly, and monitoring tire conditions visually. Investing in quality air pumps and TPMS-enabled tools can enhance convenience and accuracy.

Implementing preventive measures, such as routine inspections and technology upgrades, can significantly reduce the risk of tire-related incidents. Adopting a systematic approach toward vehicle maintenance ensures safety on the road.

Why Does the Low Tire Pressure Light Turn On in the 2017 Silverado LTZ?

The low tire pressure light turns on in the 2017 Silverado LTZ primarily due to insufficient air pressure in one or more tires. The tire pressure monitoring system (TPMS) detects pressure drops and alerts the driver.

According to the National Highway Traffic Safety Administration (NHTSA), the TPMS warns drivers of under-inflated tires to enhance vehicle safety. Under-inflated tires can decrease fuel efficiency, increase tire wear, and elevate the risk of tire blowouts.

The underlying causes for the low tire pressure warning include several factors:

Air Temperature Changes: Tire pressure drops with falling temperatures. Cold weather can reduce tire pressure by approximately one pound per square inch (psi) for every 10-degree Fahrenheit drop.
Punctures or Leaks: Tires can develop punctures or slow leaks. This gradual loss of air leads to lower pressure and activates the warning light.
Tire Aging: Over time, tires can naturally lose air due to aging materials. The rubber may become porous, allowing air to escape even without visible damage.
Improper Inflation: Tires may not be inflated according to manufacturer specifications, resulting in an imbalance in pressure levels across the tires.

The TPMS functions through sensors located in each tire that measure air pressure. When the pressure drops below a pre-set threshold, the system sends a signal to the vehicle’s computer, triggering the low tire pressure warning light.

Specific conditions contributing to this issue include:

Seasonal Changes: Cold weather typically causes tire pressure to decrease.
Heavy Loads: Carrying heavy loads can increase tire strain and lead to lower pressure.
Routine Maintenance Neglect: Failing to check and inflate tires regularly can result in pressure loss.

Regularly checking tire pressure, especially during seasonal changes, can help maintain proper inflation and prevent the low tire pressure light from activating.

How Do I Check the Tire Pressure Manually on the 2017 Silverado LTZ?

To check the tire pressure manually on the 2017 Silverado LTZ, follow these steps: acquire a tire pressure gauge, locate the tire pressure specifications, check each tire’s pressure, and adjust if necessary.

Acquire a tire pressure gauge: This tool measures the air pressure in your tires. You can purchase a digital or analog gauge at an auto parts store or online. It is important to have this tool for accurate measurement.
Locate the tire pressure specifications: You can find the recommended tire pressure for your vehicle on the driver’s side door jamb. It will display the ideal pressure values for both the front and rear tires, typically measured in pounds per square inch (PSI). Knowing these values ensures that you inflate your tires to the correct level for optimal performance.
Check each tire’s pressure:
– Remove the valve cap from one tire.
– Firmly press the tire pressure gauge onto the valve stem.
– Read the measurement displayed on the gauge.
– Repeat this process for all four tires, including the spare if applicable.
Adjust tire pressure as necessary:
– If the pressure is lower than the recommended level, add air until it reaches the specification.
– If it is too high, release some air until you meet the required PSI.
– Replace the valve caps after checking and adjusting each tire.

Maintaining the correct tire pressure is crucial for safe driving, fuel efficiency, and tire longevity. It is recommended to check tire pressure at least once a month and before long trips. Additionally, perform the measurement when the tires are cold, as heat can increase tire pressure readings.

What Are the Steps to Successfully Reset the Low Tire Pressure Light on the 2017 Silverado LTZ?

The steps to successfully reset the low tire pressure light on the 2017 Silverado LTZ are clear and straightforward.

Check all tire pressures.
Use the vehicle’s ignition key to turn the ignition to the “On” position without starting the engine.
Locate the “Set” button for the Tire Pressure Monitoring System (TPMS).
Press and hold the “Set” button until the TPMS light blinks and turns off.
Start the vehicle and verify that the light is off.

Performing the reset successfully can depend on multiple factors, including tire pressure accuracy, system malfunctions, or whether the reset procedure was followed correctly. If the issue persists, consider checking each tire’s valve stem for possible damage or seeking professional help.

Check All Tire Pressures:
Checking all tire pressures involves ensuring that each tire is inflated to its recommended level. This value can usually be found in the owner’s manual or on a label inside the driver’s door.
Turn the Ignition On:
Turning the ignition to the “On” position allows the vehicle’s systems to initialize. Ensure that the engine does not start during this step.
Locate the “Set” Button:
The “Set” button is typically located on the lower left side of the dashboard or on the center console. This button directly interacts with the TPMS.
Press and Hold the “Set” Button:
When pressing and holding the “Set” button, you should see the TPMS light blink. Once it turns off, the system has been successfully reset.
Start the Vehicle and Verify:
Starting the vehicle after the reset procedure completes the process. Confirmation that the light is off ensures that the system functions properly.

By following these steps, vehicle owners can maintain tire pressure levels effectively, contributing to improved safety and fuel efficiency. Regular tire checks and monitoring are critical for vehicle performance and tire longevity.

What Should I Do if the Low Tire Pressure Light Remains On After Resetting in the 2017 Silverado LTZ?

If the low tire pressure light remains on after resetting in the 2017 Silverado LTZ, you should check the tire pressures, inspect for leaks or damage, and reset the Tire Pressure Monitoring System (TPMS) again. If issues persist, seek professional assistance.

Check Tire Pressures
Inspect Tires for Damage
Reset the TPMS
Examine the TPMS Sensor
Visit a Professional Mechanic

After exploring these key areas, it is crucial to understand what each entails and how they can help resolve the issue.

Check Tire Pressures: Checking tire pressures is essential for vehicle safety. Under-inflated tires can trigger the low tire pressure light. Use a tire pressure gauge to measure the air pressure in each tire, including the spare. The recommended tire pressure can often be found on a sticker inside the driver’s door frame. Maintaining proper inflation levels is important for handling, fuel efficiency, and longevity of the tires.
Inspect Tires for Damage: Inspecting tires for damage is critical to vehicle safety. Look for punctures, cracks, or bulges that may affect tire performance. Tire damage can lead to air loss and is a common cause for the low pressure light to remain illuminated. If you find any issues, the affected tire may need repair or replacement.
Reset the TPMS: Resetting the Tire Pressure Monitoring System (TPMS) may solve issues with the light. This process involves turning on the ignition without starting the engine and pressing the TPMS reset button. Some models may require driving the vehicle for a short distance to recalibrate the system. Be sure to check the owner’s manual for specific instructions for your Silverado LTZ.
Examine the TPMS Sensor: Examining the TPMS sensor is essential for diagnosing persistent issues. Each tire has a sensor that monitors pressure and communicates with the vehicle’s computer. If a sensor fails or the battery inside it is dead, it can cause the light to stay on. Professional diagnostics may be necessary to check the functionality of the TPMS sensors.
Visit a Professional Mechanic: Visiting a professional mechanic is advisable if the problem persists. Technicians have the tools and expertise to diagnose deeper issues, such as problems with the vehicle’s electrical system or the TPMS itself. They can provide accurate assessments and repairs to ensure your safety and vehicle performance.

What Safety Measures Should I Take When My Tire Pressure Is Low on the 2017 Silverado LTZ?

When your tire pressure is low on the 2017 Silverado LTZ, it’s crucial to take immediate safety measures. Ensuring your safety and the safety of others is a priority when dealing with low tire pressure.

Pull over safely to a secure location.
Check the tire pressure using a pressure gauge.
Inflate the tires to the recommended pressure.
Inspect the tires for visible damage or wear.
Monitor the tire pressure regularly.
Consider consulting a professional for persistent issues.

To elaborate on these safety measures, you must understand the importance of each step.

Pulling over safely: When you notice low tire pressure, it is vital to pull over to a secure location. This prevents you from driving on potentially unsafe tires, which could lead to blowouts or loss of control. A safe area allows you to assess the situation without risking further damage or accidents.
Checking tire pressure: Checking your tire pressure with a pressure gauge is essential. The recommended pressure for the 2017 Silverado LTZ is typically found in the owner’s manual or on a sticker located inside the driver’s door jamb. Regular checks can help prevent situations where low pressure worsens.
Inflating the tires: Inflate the tires to the manufacturer’s recommended pressure. Under-inflated tires can lead to decreased fuel efficiency and increased tire wear. Keeping tires inflated properly, as suggested by the National Highway Traffic Safety Administration (NHTSA), enhances vehicle safety and prolongs tire lifespan.
Inspecting for damage: After checking the pressure, inspect the tires visually for punctures, cracks, or uneven wear. Damage can compromise tire integrity. If you find severe issues, replacing or repairing the tire is essential for safety.
Monitoring pressure regularly: Regular tire pressure monitoring is crucial. The Tire Pressure Monitoring System (TPMS) alerts drivers when pressure drops too low. Consistent monitoring helps avoid situations where tires are dangerously under-inflated, which can divert attention while driving.
Consulting a professional: If low tire pressure issues persist, consult a professional technician. They can assess the tires for leaks, valve issues, or other underlying problems. Addressing these problems promptly can prevent future emergencies and ensure that the vehicle operates safely.

By taking these safety measures seriously, you can maintain the safety and performance of your 2017 Silverado LTZ while driving.

Related Post:

Resetting Low Tire Pressure Light: How to Clear TPMS on 2017 Silverado LTZ