To reset the tire pressure monitor on a 2017 Ram, first, check that your tire pressure is correct. Next, turn on the ignition without starting the engine. Find the reset button, located to the right of the steering wheel. Press and hold the button until the light blinks. Wait approximately ten minutes for the system to complete the reset.
To reset the Tire Pressure Monitor, follow these steps:
- Begin by ensuring all tires are inflated to the recommended pressure. Check the driver’s door jamb for the correct values.
- Turn on the ignition without starting the engine. This action powers the vehicle’s systems.
- Locate the Tire Pressure Monitoring System (TPMS) button. This button is often found beneath the steering wheel or on the dashboard.
- Press and hold the TPMS button until the tire pressure warning light blinks three times. This indicates the system is in reset mode.
- Release the button. The system will recalibrate within a few minutes. The warning light should turn off once the reset is complete.
Following these steps ensures your Tire Pressure Monitor functions properly. Regular checks and resets enhance safety and fuel efficiency.
Next, we will discuss common issues that may arise with the Tire Pressure Monitor and how to troubleshoot them effectively.
What is the Tire Pressure Monitoring System (TPMS) in a 2017 Ram?
The Tire Pressure Monitoring System (TPMS) in a 2017 Ram is a safety device designed to monitor the air pressure in the tires. It alerts the driver when the tire pressure falls below a certain threshold, helping to prevent tire failure and enhance vehicle safety.
The National Highway Traffic Safety Administration (NHTSA) defines TPMS as a system that indicates tire pressure issues to improve driver awareness and vehicle safety. The system is mandated in vehicles to prevent hazardous driving conditions related to tire pressure.
TPMS consists of sensors located in each tire that measure pressure and relay information to the vehicle’s onboard computer. When tire pressure drops significantly, the system triggers a warning light on the dashboard. This system helps maintain optimal tire performance, fuel efficiency, and extends the lifespan of the tires.
According to the Tire Industry Association, proper tire pressure can improve vehicle handling and fuel economy while reducing tire wear. Maintaining correct pressure can enhance overall vehicle performance and safety.
Tire pressure problems may arise from temperature fluctuations, leaks, or improper tire installation. Poor maintenance may also lead to low tire pressure, increasing the risk of accidents and blowouts.
Data from the NHTSA indicates that under-inflated tires contribute to about 10% of all vehicle crashes. The agency emphasizes regular tire pressure checks to mitigate associated risks.
Inadequate tire pressure leads to increased fuel consumption and emissions, contributing to higher greenhouse gas outputs and economic costs related to vehicle maintenance.
For instance, proper tire inflation could save drivers up to $0.10 per gallon of fuel, according to the DOE’s Office of Energy Efficiency and Renewable Energy.
To address tire pressure issues, the NHTSA recommends regular tire inspections, using TPMS features diligently, and maintaining appropriate pressure levels based on the manufacturer’s recommendations.
Technologies like smart sensors and mobile apps can assist in monitoring tire pressure in real-time. Drivers can adopt practices such as checking tire pressure monthly and before long trips for safety.
Why is it Important to Reset the Tire Pressure Monitor on a 2017 Ram?
Resetting the Tire Pressure Monitor on a 2017 Ram is important for maintaining optimal vehicle performance and safety. The tire pressure monitoring system (TPMS) alerts the driver when tire pressures are low. Resetting it after adjusting tire pressures or changing tires ensures the system functions correctly and provides accurate readings.
According to the National Highway Traffic Safety Administration (NHTSA), “Tire pressure monitoring systems are designed to warn drivers when their tires are significantly under-inflated, which can lead to hazardous driving conditions and increased risk of tire blowouts.” This information highlights the importance of maintaining proper tire pressure and the role of TPMS in vehicle safety.
Several reasons underline the importance of resetting the TPMS. First, when tire pressure drops or increases, the vehicle may experience reduced fuel efficiency. Second, incorrect tire pressure can affect vehicle handling and stability. Third, a properly functioning TPMS prevents drivers from ignoring potential tire issues that can lead to accidents.
TPMS operates based on sensors located within each tire, which monitor the air pressure. When pressure falls below a certain threshold, the system activates a warning light on the dashboard. Resetting the system clears any previous alerts and recalibrates sensors. This process is vital as it ensures the system recognizes the current tire pressures.
Specific actions can trigger the need to reset the TPMS. For example, changing a flat tire, inflating tires to the manufacturer’s recommended pressure, or experiencing a significant temperature change can all necessitate a reset. Tire pressure can decrease in colder weather, making it essential to adjust and reset the system accordingly. Neglecting this step can lead to incorrect pressure readings and increase the risk of tire-related failures.
In summary, resetting the Tire Pressure Monitor on a 2017 Ram is crucial for ensuring accurate tire pressure readings and maintaining vehicle safety. The TPMS provides essential alerts, and timely resetting preserves its functionality.
What Steps Should You Follow to Reset the Tire Pressure Monitoring System on a 2017 Ram?
To reset the Tire Pressure Monitoring System (TPMS) on a 2017 Ram, follow these steps:
- Ensure all tires are inflated to the recommended pressure.
- Turn on the ignition without starting the engine.
- Press and hold the TPMS reset button until the TPMS indicator blinks three times.
- Release the button and start the engine.
- Drive the vehicle for a few minutes to allow the system to reset.
Steps to follow to reset the TPMS:
- Inflate tires to recommended pressure
- Turn on ignition
- Press TPMS reset button
- Release button
- Start engine
- Drive vehicle
These steps are commonly accepted; however, opinions may vary. Some users report varying effectiveness based on tire brand, type of sensor used, or vehicle load. It is essential to consider vehicle maintenance history, as a previously unresolved tire issue could also affect system performance.
The process of resetting the Tire Pressure Monitoring System involves several key actions.
-
Inflate Tires to Recommended Pressure: Ensure all tires are inflated to their specific pressure levels. Each tire should have a label indicating the correct pressure, usually found inside the driver’s door or in the owner’s manual. Proper inflation is crucial for system accuracy.
-
Turn on Ignition: Turn the vehicle’s ignition to the “On” position, but do not start the engine. This allows the system to activate without engaging other vehicle functions.
-
Press TPMS Reset Button: Locate the TPMS reset button, typically found under the steering wheel or on the dashboard. Press and hold this button until the TPMS warning light blinks three times. This step signals the vehicle’s system to begin the resetting process.
-
Release Button: After the system light blinks three times, release the TPMS reset button. This action is essential as it finalizes the reset command sent to the system.
-
Start Engine: Start the engine to check if the TPMS warning light remains illuminated. If the light goes off after a few moments, the system has reset successfully.
-
Drive Vehicle: To complete the TPMS reset, drive the vehicle for approximately 10 to 15 minutes. This allows the system to recalibrate and detect the tire pressure accurately.
In summary, resetting the TPMS on a 2017 Ram involves straightforward steps designed to ensure tire safety and performance. Proper adherence to these steps can prevent the TPMS warning light from continuously displaying, enhancing the overall driving experience.
What Tools Do You Need to Reset the Tire Pressure Monitor?
To reset the Tire Pressure Monitor, you need specific tools to ensure proper functionality and safety.
- Tire pressure gauge
- Tire inflator
- Onboard diagnostics (OBD-II) scanner
- Tire pressure monitoring system (TPMS) reset tool
- Standard vehicle owner’s manual
Many vehicle owners may have differing opinions regarding the necessity of each tool. Some believe a basic tire pressure gauge and inflator are adequate, while others insist on using a TPMS reset tool for accuracy. Additionally, some may argue that an OBD-II scanner is essential for diagnosing underlying issues that could affect tire pressure monitoring.
Resetting the Tire Pressure Monitor requires various tools to achieve accurate results.
-
Tire Pressure Gauge: A tire pressure gauge measures the air pressure in your tires. Ensuring your tires are inflated to the recommended pressure is crucial for safety and performance. The National Highway Traffic Safety Administration (NHTSA) recommends maintaining optimal tire pressure to enhance fuel efficiency and prolong tire lifespan.
-
Tire Inflator: A tire inflator is used to add air to tires when required. Portable tire inflators allow quick inflation without seeking out a service station. According to a study by the American Automobile Association (AAA) in 2018, correct tire pressure can improve fuel economy by up to 3%.
-
Onboard Diagnostics (OBD-II) Scanner: An OBD-II scanner is a device that connects to a vehicle’s onboard computer system. It can retrieve diagnostic trouble codes related to the TPMS. This tool is particularly useful for identifying issues that may prevent successful tire pressure monitoring resets. The Environmental Protection Agency (EPA) notes that timely diagnostics can prevent more significant vehicular problems.
-
Tire Pressure Monitoring System (TPMS) Reset Tool: A TPMS reset tool is specially designed to reset the tire pressure monitoring system in vehicles. Windows and user manuals often provide specific procedures for using these tools based on vehicle make and model. According to data from Tire Industry Association, around 25% of tires are improperly inflated, highlighting the importance of proper TPMS management.
-
Standard Vehicle Owner’s Manual: The vehicle owner’s manual contains essential guidelines for maintaining and resetting the TPMS. This document typically offers specific instructions and troubleshooting tips based on the vehicle model. Manufacturers, such as Ford, Honda, and Chevrolet, emphasize the manual’s role in one’s vehicle maintenance program.
Having the right tools ensures proper monitoring of tire pressure, which contributes to overall vehicle safety and efficiency.
How Do You Access the Tire Pressure Monitor Reset Function in a 2017 Ram?
To access the Tire Pressure Monitor reset function in a 2017 Ram, follow these steps: start the vehicle, navigate to the settings on the dashboard, and select the tire pressure monitoring option.
-
Start the vehicle: Insert the key into the ignition and turn it to the “On” position without starting the engine. This action powers up the dashboard display.
-
Open vehicle settings: Use the buttons on the steering wheel to scroll through the dashboard menu. Look for the settings or vehicle information section. This section contains various options and controls for the truck’s features.
-
Select tire pressure monitoring option: Within the settings menu, find the tire pressure monitoring menu. This menu typically displays the current tire pressures and allows you to reset the monitoring system.
-
Reset the monitoring system: Once in the tire pressure monitoring menu, look for the option to reset the system. Confirm the reset by following any on-screen prompts or instructions.
-
Check for confirmation: After resetting, the system should provide a confirmation message or light. This message indicates that the Tire Pressure Monitor has been successfully reset.
By following these steps, you can effectively reset the Tire Pressure Monitor in your 2017 Ram, ensuring accurate tire pressure readings moving forward.
What is the Process for Resetting the Tire Pressure Monitor After Adjusting Tire Pressures?
Resetting the Tire Pressure Monitor (TPM) is the process of reprogramming the vehicle’s system to acknowledge the new tire pressures after adjustments are made. This ensures accurate monitoring of tire inflation levels and alerts drivers to potential issues.
According to the National Highway Traffic Safety Administration (NHTSA), tire pressure monitoring systems are critical for vehicle safety and fuel efficiency, helping to prevent tire blowouts and optimize gas mileage.
The process typically involves checking each tire’s pressure, including the spare if applicable. Once the correct pressures are set, the driver needs to reset the TPM system using the vehicle’s reset button or through the dashboard menu. This ensures that all sensors are calibrated to the new pressure levels.
The Tire Industry Association states that maintaining proper tire pressure can improve fuel efficiency by around 3% and extend tire life. Correct pressures also enhance vehicle handling and braking performance.
Common causes for the need to reset include seasonal temperature changes, tire rotations, or replacing tires. Additionally, slow leaks or punctures may require pressure adjustments.
Studies indicate that 25% of vehicles on the road have at least one under-inflated tire, which can significantly affect handling and safety, as reported by the Rubber Manufacturers Association.
The implications of neglecting tire pressure include increased tire wear, reduced fuel efficiency, and a higher risk of accidents, which can impact both personal and public safety.
Improving tire pressure management can reduce oil consumption and greenhouse gas emissions. Experts recommend regular checks of tire pressure at least once a month.
Practices like using tire pressure monitoring gauges and inflating tires according to manufacturer specifications can mitigate tire pressure issues effectively. Proper maintenance and awareness are crucial for safe driving.
Regularly scheduled tire maintenance and using technology like automatic tire inflation systems can further promote responsible tire pressure management.
What Should You Do If the Tire Pressure Monitor Does Not Reset on a 2017 Ram?
If the tire pressure monitor does not reset on a 2017 Ram, you should check tire pressure, inspect for warning lights, consult the owner’s manual, and consider professional help.
- Check Tire Pressure
- Inspect Warning Lights
- Consult the Owner’s Manual
- Seek Professional Help
To effectively resolve the tire pressure monitor issue, consider the following actions in detail.
-
Check Tire Pressure: Checking tire pressure involves using a tire gauge to measure the air pressure in each tire. Incorrect tire pressure may cause the monitor to malfunction. Make sure all tires are inflated to the recommended pressure, which is usually found on a sticker inside the driver’s door. According to the National Highway Traffic Safety Administration (NHTSA), tire pressure should be checked monthly to ensure safety and efficiency.
-
Inspect Warning Lights: Inspecting warning lights involves looking for any illuminated indicators on the dashboard that signal tire pressure issues. If a warning light remains lit even after checking the tires, it could indicate a problem with the tire pressure monitor system itself. It’s essential to understand the difference between tire pressure warning indicators and other symbols, as outlined in the vehicle’s owner’s manual.
-
Consult the Owner’s Manual: Consulting the owner’s manual provides specific instructions tailored to your vehicle’s model. The manual usually includes detailed information about resetting the tire pressure monitor and troubleshooting steps. For the 2017 Ram, the reset procedure often involves a specific series of steps such as turning the ignition on and pressing a reset button. Proper reference to the owner’s manual enhances safety and ensures effective maintenance.
-
Seek Professional Help: Seeking professional help is recommended if the issue persists after performing the above checks. A certified mechanic can diagnose and correct underlying problems, including sensor failures or software issues. The American Automobile Association (AAA) states that timely professional intervention can prevent further complications related to tire maintenance and vehicle safety.
Addressing the tire pressure monitor reset issue on a 2017 Ram involves operational checks, thorough manual reference, and when necessary, professional assistance to maintain vehicle safety and performance.
When Should You Check or Service the Tire Pressure Monitoring System in a 2017 Ram?
You should check or service the Tire Pressure Monitoring System (TPMS) in a 2017 Ram when the TPMS warning light appears on the dashboard. This light indicates that at least one tire may be significantly under-inflated. Additionally, you should inspect the TPMS if you experience uneven tire wear, if you frequently notice tire pressure changes, or when you change tires, such as switching from winter to summer tires.
To ensure proper functioning, check the TPMS during routine maintenance, such as oil changes. Regularly monitoring tire pressure is essential, especially before long trips or when temperatures change significantly. If you replace a tire or install new tires, have the TPMS sensors checked and reprogrammed if necessary. After servicing, reset the TPMS to ensure it accurately reflects the current tire pressures.
A proactive approach keeps your tires in optimal condition. Check your tire pressure at least once a month, as well. By following these practices, you enhance safety and improve fuel efficiency.
Related Post: