The spare tire in the 2019 Kia Soul fits in the trunk. However, it sits about 3 inches higher than the styrofoam insert. This height difference causes the trunk floor to rise above the intended flush position. While the spare tire fits, you will notice this change in the cargo space.
In the 2019 Kia Soul, the spare tire is located underneath the cargo area floor. To access it, simply lift the cargo floor cover. You will find a circular compartment housing the spare tire. Next, to remove the tire, ensure the vehicle is on a flat surface. Use the provided tools to loosen the securing bolts. Once the bolts are free, gently lift the spare tire out of its compartment.
Following this procedure will help you quickly access the spare tire when needed. After removing the tire, it is essential to follow the correct steps for installation back into the vehicle or to replace the tire on the road. These simple yet effective measures ensure every driver maintains peace of mind regarding their vehicle’s spare tire fit.
Now, let’s explore the procedure for changing a flat tire on the 2019 Kia Soul.
What Is Included in the Spare Tire Kit for a 2019 Kia Soul?
A spare tire kit for a 2019 Kia Soul includes essential tools and equipment for changing a flat tire. This kit typically contains a compact spare tire, a jack, a lug wrench, and an air compressor or tire sealant.
According to Kia’s official documentation, spare tire kits are designed to provide drivers with necessary tools to address temporary tire issues and ensure safety. These kits are part of the manufacturer’s commitment to vehicle reliability and driver preparedness.
The spare tire is generally a smaller, lightweight version of a regular tire, designed for temporary use. The jack lifts the vehicle to facilitate tire changes, while the lug wrench loosens and tightens the lug nuts securing the tire. An air compressor or tire sealant may also be included to assist with minor tire repairs.
The National Highway Traffic Safety Administration (NHTSA) notes that having a fully equipped spare tire kit is crucial for road safety and minimizing the risk of further accidents after a tire failure. Proper education on using this kit is essential for drivers.
Flat tires can occur due to various causes, including punctures, tread wear, or environmental conditions. Regular maintenance and inspections can help mitigate these risks. The Rubber Manufacturers Association indicates that around 220 million flat tires occur annually in the U.S. alone.
Not having a spare tire kit can lead to increased travel delays and can create unsafe roadside situations for drivers. It amplifies risks for both the driver and subsequent road users if assistance is required.
To enhance road safety, the American Automobile Association (AAA) recommends that drivers invest in a comprehensive spare tire kit. They stress regular checks of tire pressure and tread condition, along with ensuring that all tools are present and functional.
Incorporating mobile apps that provide roadside assistance can also be beneficial for drivers. These technologies offer prompt help and information about the nearest service providers.
Maintaining a spare tire kit and being aware of its components can significantly improve a driver’s safety and preparedness on the road.
Where Exactly Is the Spare Tire Located in a 2019 Kia Soul?
The spare tire in a 2019 Kia Soul is located under the floor mat in the cargo area. You can access it by lifting the trunk floor cover. The spare tire is secured with a retaining bolt. Turn the bolt counterclockwise to release the spare tire. After removing it, you can also find the jack and other tools stored beneath the floor mat.
How Do You Remove the Spare Tire from a 2019 Kia Soul Safely?
To safely remove the spare tire from a 2019 Kia Soul, follow these steps: locate the spare tire, gather necessary tools, raise the vehicle, remove the tire, and store it properly.
To elaborate on these key points:
-
Locate the Spare Tire: The spare tire is stored under the cargo area floor. Open the rear hatch and remove the floor cover to access it.
-
Gather Necessary Tools: You will need the following tools:
– A lug wrench to loosen and tighten wheel nuts.
– A jack to lift the vehicle. The jack is typically found with the spare tire.
– Safety gloves to protect your hands. -
Raise the Vehicle:
– Position the jack under the vehicle’s designated lift point, which is indicated in the owner’s manual.
– Ensure the vehicle is on a flat surface and engage the parking brake.
– Crank the jack until the tire is off the ground. Ensure stability by confirming the jack is positioned securely. -
Remove the Tire:
– Use the lug wrench to loosen the lug nuts by turning them counterclockwise.
– Remove the lug nuts and place them in a safe location.
– Gently pull the spare tire straight out. Handle it carefully to avoid injury. -
Store the Spare Tire Properly:
– If the spare tire is not needed immediately, place it back into the storage area.
– Ensure the cover is secured to avoid rattling during vehicle operation.
By following these steps, you can safely and efficiently remove the spare tire from your 2019 Kia Soul. Maintaining awareness of your surroundings and working carefully can prevent accidents and ensure safety during the process.
What Tools Are Necessary for Accessing the Spare Tire in a 2019 Kia Soul?
To access the spare tire in a 2019 Kia Soul, you need specific tools that facilitate the removal and retrieval process.
The necessary tools include the following:
1. Jack
2. Lug wrench
3. Utility knife (optional)
4. Flashlight (optional)
Transitioning from the tools to the process, these tools will enable you to efficiently access the spare tire located in the vehicle.
-
Jack: The jack is a tool that lifts the car off the ground. You need it to elevate the vehicle and remove the flat tire safely. Use the jack found in the trunk area of the Kia Soul. Most jacks are hydraulic or scissor style which allows for easy lifting.
-
Lug Wrench: A lug wrench loosens and tightens the lug nuts that secure the tire. The Kia Soul typically comes with a cross-shaped lug wrench for better leverage. It is essential for removing the flat tire and installing the spare tire correctly.
-
Utility Knife (optional): A utility knife can assist in cutting away any entangled materials or debris that may prevent the spare tire from being easily accessible. While it is not mandatory, having one handy could streamline the process.
-
Flashlight (optional): A flashlight is helpful for illuminating the area under the vehicle and around the tire if visibility is low. In dark conditions, it aids in ensuring you can perform the task safely and without missing any crucial steps.
These tools combine to create an effective kit for successfully accessing and replacing the spare tire in a 2019 Kia Soul. Proper use of these tools can lead to a quick and safe tire change.
What Are the Step-by-Step Instructions for Installing the Spare Tire in a 2019 Kia Soul?
To install the spare tire in a 2019 Kia Soul, follow the steps outlined below.
- Find a safe location.
- Gather necessary tools.
- Remove the hubcap (if applicable).
- Loosen the lug nuts.
- Lift the vehicle with the jack.
- Remove the flat tire.
- Install the spare tire.
- Lower the vehicle.
- Tighten the lug nuts.
- Reattach the hubcap (if applicable).
Now let’s explore each step in detail for clarity and effectiveness.
-
Finding a Safe Location: Finding a safe location is crucial before changing the tire. This involves moving the vehicle to a flat, stable area away from traffic. A parking lot or roadside shoulder works best. Ensure your vehicle is not on a slope to avoid accidents during the tire change.
-
Gathering Necessary Tools: Gathering necessary tools includes ensuring you have all items needed for the installation. This typically consists of a jack, a lug wrench, and the spare tire. Some models may also include a tire repair kit. Having everything ready simplifies the process.
-
Removing the Hubcap (if applicable): Removing the hubcap, if your model has one, requires gentle prying with a flat tool. This step may vary by model. Carefully detaching the hubcap prevents damage and allows access to the lug nuts.
-
Loosening the Lug Nuts: Loosening the lug nuts involves turning them counterclockwise. It’s easier to do this while the vehicle is still on the ground. A lug wrench is typically used to apply the necessary force. Loosening them before lifting the car reduces strain during tire removal.
-
Lifting the Vehicle with the Jack: Lifting the vehicle properly is essential for safety. Engage the jack at the designated rear jack point and lift until the tire is off the ground. The 2019 Kia Soul features a built-in jack; refer to your owner’s manual for exact locations.
-
Removing the Flat Tire: Removing the flat tire requires efficiently unscrewing the previously loosened lug nuts. Carefully store these nuts in a safe location for later use. Gently pulling the tire towards you detaches it from the vehicle.
-
Installing the Spare Tire: Installing the spare tire involves aligning it with the wheel hub and pushing it into place. Make sure the holes in the tire align with the threaded bolts.
-
Lowering the Vehicle: Lowering the vehicle back to the ground should be done slowly and carefully. Ensure the spare tire has contact with the ground before fully releasing the jack.
-
Tightening the Lug Nuts: Tightening the lug nuts with the lug wrench should be done in a star pattern for even distribution. This prevents the wheel from being unevenly secured. Ensure all nuts are tightened to the manufacturer’s specifications.
-
Reattaching the Hubcap (if applicable): If the original hubcap is intact, carefully place it back on the spare tire if applicable. Ensure it fits securely to enhance the tire’s aesthetics and protect it.
By following these detailed steps, you should successfully install the spare tire in your 2019 Kia Soul.
How Should You Properly Store the Spare Tire After Use in a 2019 Kia Soul?
To properly store the spare tire after use in a 2019 Kia Soul, ensure the tire is clean and dry before placing it back in the storage area. The ideal storage location is within the vehicle’s trunk, secured in its designated space to prevent movement during driving. The recommended air pressure for the spare tire is 60 psi; check this pressure before use and regularly to ensure it remains optimal.
After using the spare tire, inspect it for damage or wear. Any cracks, bulges, or severe tread wear indicates it may need replacement. Consider that spare tires, often smaller and less durable than standard tires, have a limited lifespan. It is advisable to replace a spare tire every six years, even if it has not been used.
Use a plastic cover or bag to protect the tire from dust and moisture if storing it for an extended period. Avoid exposing the tire to direct sunlight or extreme temperatures, as these conditions can degrade rubber quality over time. Additional factors such as humidity and storage location can impact the tire’s longevity and performance.
In conclusion, ensure your spare tire is clean, correctly inflated, and stored in a protected environment. Regular inspections and timely replacements can guarantee its readiness for future use. As a next step, consider checking the vehicle’s manual for any specific recommendations regarding spare tire maintenance.
Related Post: