How Long Can You Ride On Bald Tires? Safety Risks And Replacement Tips For Drivers [Update On 2025]

Driving on bald tires is risky. They have little tread depth, which increases stopping distance and puncture susceptibility. Short trips or low speeds might seem safe, but they elevate safety risks. Legal implications may arise if an accident occurs. Replace bald tires immediately to ensure your vehicle’s safety and prevent accidents.

The lifespan of bald tires varies. Some drivers might operate on them for a few hundred miles. However, even short distances pose substantial safety risks. Increased stopping distances can lead to accidents. Wear and tear also make tires more prone to punctures.

To improve safety, regularly check your tire tread. Use the penny test or a tread depth gauge. Keep tires properly inflated and rotate them according to the manufacturer’s guidelines. When replacing tires, consider factors like climate and driving conditions.

By understanding how long you can ride on bald tires, you can make informed decisions. Staying aware of their condition will enhance your safety on the road. In the following section, we will explore the signs indicating it’s time for a tire replacement to ensure optimal safety while driving.

Table of Contents

What Are Bald Tires and Why Are They Dangerous?

Bald tires are tires that have worn down to the point where their tread depth is insufficient for safe driving. They are considered dangerous because they increase the risk of hydroplaning, reduce traction, and increase stopping distances.

Effects of Reduced Traction
Increased Hydroplaning Risk
Longer Stopping Distances
Less Effective Handling
Higher Probability of Blowouts

The dangers associated with bald tires highlight their impact on overall vehicle safety, necessitating a deeper understanding of each concern.

Effects of Reduced Traction:
The effect of reduced traction occurs when tread wears down below the legal limit of 1.6 millimeters (2/32 inch). Low tread depth diminishes the tire’s ability to grip the road surface. A study by the National Highway Traffic Safety Administration (NHTSA) indicated that vehicles with bald tires are three times more likely to be involved in accidents. For example, during rainy conditions, worn tires can lead to a severe loss of control.
Increased Hydroplaning Risk:
Increased hydroplaning risk occurs when tire tread is insufficient to channel water away. Hydroplaning happens when a layer of water separates the tire from the road. According to findings from the AAA Foundation for Traffic Safety, bald tires contribute significantly to hydroplaning and can cause a driver to lose control at speeds as low as 35 mph. Drivers should be aware that even a small amount of water on the roadway can lead to this dangerous situation.
Longer Stopping Distances:
Longer stopping distances result from the decreased surface area of bald tires in contact with the road. Research from the Tire Industry Association shows that worn tires can increase stopping distances by up to 60%. This delay is particularly critical in emergency situations where quick stopping is necessary to avoid collisions.
Less Effective Handling:
Less effective handling occurs when tires no longer provide adequate feedback to the driver. Worn tires may lead to a reduced connection between the vehicle and the road, causing a disconnect during maneuvering. The Automotive Research Center has found that drivers with bald tires report poorer handling responsiveness, especially in sharp turns.
Higher Probability of Blowouts:
Higher probability of blowouts becomes a significant concern with bald tires due to their compromised structural integrity. As tires wear down, the chance of a puncture increases. The Rubber Manufacturers Association reports that nearly 30 percent of tire-related crashes can be attributed to air loss or blowouts from inadequate tire maintenance. Such incidents can cause serious accidents and threaten driver safety.

In summary, bald tires are dangerously inadequate for safe driving, leading to reduced traction, increased hydroplaning risk, longer stopping distances, less effective handling, and a higher probability of blowouts. It is vital for drivers to routinely check tire tread depth and replace tires as needed to maintain safety and performance.

How Do You Define Bald Tires?

Bald tires are defined as tires that lack sufficient tread depth, resulting in reduced grip and increased risk of accidents. Understanding what constitutes a bald tire involves several key points:

Tread Depth: Tires are considered bald when their tread depth falls below 2/32 of an inch. This depth is crucial for maintaining traction on wet or slippery surfaces. Studies indicate that tires with insufficient tread can increase stopping distances significantly in adverse conditions (Morgan et al., 2018).
Loss of Grip: Reduced tread depth diminishes a tire’s ability to grip the road. In wet conditions, tires need tread to channel water away and prevent hydroplaning. According to the National Highway Traffic Safety Administration (NHTSA), vehicles with bald tires are three times more likely to be involved in a crash during rainy weather (NHTSA, 2020).
Increased Skid Risk: Bald tires are more prone to skidding on both wet and dry roads. The lack of tread means less surface area is in contact with the ground, leading to a greater likelihood of losing control. A study by the Tire Industry Association (TIA) found that nearly 45% of drivers involved in accidents attributed the loss of control to bald tires (TIA, 2019).
Legal Implications: Many regions have specific laws regarding minimum tread depths. Driving on bald tires can result in fines and penalties. For instance, in some states, a worn tire can lead to failing a vehicle inspection, necessitating costly replacements (State Vehicle Inspection Authorities, 2021).
Safety Risks: Ultimately, the use of bald tires poses significant safety risks not only for the driver but also for passengers and other road users. Increased stopping distances and decreased traction raise the likelihood of accidents.

Given these critical factors, it is advisable to regularly inspect tire tread and replace any tire that shows signs of balding or significant wear to maintain safety on the road.

What Impact Do Bald Tires Have on Safety?

Bald tires significantly increase the risk of accidents by reducing traction and stability on the road. They compromise vehicle handling, especially in wet or slippery conditions.

The main impacts of bald tires on safety include:
1. Decreased traction
2. Increased stopping distance
3. Higher likelihood of hydroplaning
4. Greater vulnerability to blowouts
5. Reduced vehicle control

These points illustrate the serious implications of driving on bald tires and point to a necessity for regular tire maintenance.

Decreased Traction:
Bald tires exhibit less traction due to worn tread patterns. Treads are essential for gripping the road surface. When tread wears down, it cannot effectively channel water away during rain. According to the National Highway Traffic Safety Administration (NHTSA), reduced traction can lead to a 60% increase in stopping distance on wet surfaces compared to properly maintained tires.
Increased Stopping Distance:
Driving on bald tires leads to longer stopping distances. Research shows that vehicles with bald tires can require up to 20% more distance to stop than those with sufficient tread depth. For example, if a vehicle normally stops in 100 feet, it may take up to 120 feet or more on bald tires. This delay can be critical in emergency situations where quick reaction is necessary.
Higher Likelihood of Hydroplaning:
Bald tires are more prone to hydroplaning. Hydroplaning occurs when a layer of water prevents direct contact between the tire and the road. This phenomenon can happen at speeds as low as 30 mph with bald tires on wet surfaces. The risk increases significantly in heavy rain, where even minor puddles can cause loss of control.
Greater Vulnerability to Blowouts:
Bald tires are at a heightened risk for blowouts. Worn rubber and weakened sidewalls increase the chances of tire failure, especially during high temperatures or when under heavy loads. The NHTSA indicates that nearly 90% of tire blowouts are attributed to insufficient tread or tire damage. A blowout can lead to a sudden loss of control, putting the driver and others at risk.
Reduced Vehicle Control:
Bald tires result in diminished vehicle control. This situation includes impaired steering response, especially during sharp turns or evasive maneuvers. A study by the Virginia Tech Transportation Institute found that drivers using bald tires were more than twice as likely to struggle with steering than those with adequate tires. Reduced control can lead to accidents, particularly in busy traffic conditions.

In summary, bald tires adversely affect vehicle performance and heighten road safety risks. Regular tire inspections and timely replacements are crucial to ensure safety on the road.

What Warning Signs Indicate That Tires Are Bald?

Bald tires can be identified by several warning signs that indicate a loss of tread depth, potentially compromising safety and performance.

The main warning signs of bald tires include:
1. Low tread depth
2. Uneven wear patterns
3. Visible wear bars
4. Cracks or bulges in the sidewall
5. Poor traction in wet or slippery conditions

These signs signify that tires may no longer provide safe driving conditions. It is crucial to address these issues promptly to prevent accidents and maintain vehicle performance.

Low Tread Depth:
Low tread depth occurs when the tread on the tire wears down significantly, reducing its ability to channel water away from the tire surface. The U.S. Department of Transportation recommends a minimum tread depth of 2/32 of an inch for safe driving. A simple method to measure tread depth is the penny test; insert a penny into the tread with Lincoln’s head facing down. If you see the top of Lincoln’s head, your tread is too low, and it is time to replace the tire. According to a study by the National Highway Traffic Safety Administration (NHTSA) in 2020, tires with insufficient tread contributed to 10% of the overall vehicle accidents on U.S. roadways.
Uneven Wear Patterns:
Uneven wear patterns appear when specific sections of the tire tread wear more quickly than others. This can occur due to improper inflation, misalignment, or suspension issues. For example, tires that are overinflated may wear more in the center, while underinflated tires can wear on the edges. Regularly checking tire pressure and having alignments performed can help identify and correct these issues before they result in bald tires.
Visible Wear Bars:
Visible wear bars are horizontal lines that appear in the grooves of the tire tread. They indicate when the tire has reached the legal limit of tread wear. Once these bars become flush with the surrounding tread, the tire is considered bald and should be replaced. The presence of these bars is an easily identifiable sign that tires need attention. Most tires have built-in wear bars, making this an accessible indicator for drivers to monitor.
Cracks or Bulges in the Sidewall:
Cracks or bulges in the sidewall indicate structural damage to the tire. These defects can lead to blowouts, especially at high speeds. Sidewall cracks may stem from age or exposure to extreme conditions, whereas bulges often result from impacts with potholes or other objects. Regular visual inspections of tire sides can help spot these dangerous signs early on, allowing for timely tire replacement.
Poor Traction in Wet or Slippery Conditions:
Poor traction arises when tires can no longer grip the road effectively, particularly in wet or icy conditions. This happens when tread patterns deteriorate or wear down unevenly. The NHTSA suggests that poor tire performance contributes significantly to loss of control scenarios in adverse weather. Drivers should monitor how their vehicle handles in different weather conditions, as a noticeable decrease in traction may indicate that a tire replacement is necessary.

In summary, recognizing these warning signs can greatly enhance vehicle safety and performance. Regular tire inspections and maintenance are essential to prevent driving on bald tires and ensure a smooth and safe driving experience.

How Long Can You Safely Drive on Bald Tires?

Driving on bald tires is unsafe and can lead to serious accidents. Bald tires have little to no tread, which reduces traction on wet or slippery surfaces. Most experts agree that once tires wear down to 2/32 of an inch of tread depth, they are considered bald and should be replaced. Driving on bald tires can be dangerous, especially in wet conditions, and should be avoided.

The safe lifespan of bald tires can vary based on specific conditions. On dry roads, you may drive a few hundred miles without immediate issues. However, on wet or snow-covered roads, the risk of hydroplaning or losing traction increases significantly. Studies have shown that vehicles with bald tires can be 30% more likely to lose control in wet conditions compared to those with adequate tread.

For example, if someone were to drive on bald tires during a rainy day, they might experience reduced stopping distance and longer skidding, leading to an increased likelihood of accidents. A driver might feel reasonably safe in good weather conditions, but that perception changes drastically when facing unexpected rain or slippery roads.

Additional factors that may influence the safety of driving on bald tires include speed, vehicle weight, and tire quality. Heavier vehicles and higher speeds exacerbate the risks associated with bald tires. It’s also important to note that driving habits, such as aggressive cornering or sudden braking, can further increase the danger.

In summary, while some may attempt to drive short distances on bald tires, it is not a safe practice. Once they reach a tread depth of 2/32 of an inch, replacement is necessary. For improved safety, consider replacing tires before they reach this threshold. Additionally, monitor your driving conditions and habits to maintain safety on the road.

What Factors Determine How Long You Can Drive on Bald Tires?

Driving on bald tires can significantly increase the risk of accidents and impair vehicle performance. Factors that determine how long you can drive on bald tires include:

Tread depth.
Weather conditions.
Driving habits.
Tire age.
Load capacity.
Vehicle type.
Terrain conditions.

Each of these factors plays a crucial role in tire safety and vehicle handling. They can impact performance differently under various scenarios, which is important to understand when assessing the safety of bald tires.

Tread Depth: Tread depth refers to the measurement of the grooves in the tire. According to the U.S. Department of Transportation, tires are considered bald when tread depth is below 2/32 of an inch. At this depth, tires lose their ability to grip the road effectively, especially in wet conditions. Unsafe tread depth leads to longer stopping distances and increases the likelihood of hydroplaning during rainfall.
Weather Conditions: Weather conditions greatly influence driving safety. Wet, icy, or snowy conditions require adequate tread for traction. The National Highway Traffic Safety Administration (NHTSA) emphasizes that bald tires can be particularly hazardous in adverse weather, as they reduce the vehicle’s grip, leading to skidding or loss of control.
Driving Habits: Driving habits such as aggressive acceleration, hard braking, or rapid cornering can diminish tire life. A study from the Tire Research Group (2019) noted that aggressive driving can exacerbate the risk associated with bald tires, resulting in quicker deterioration and heightened accident risk.
Tire Age: Tire age can be as critical as tread depth. Tires should be replaced every six years regardless of tread wear. According to the Tire Industry Association, rubber degrades over time, which can lead to blowouts or tire failure, even if tread appears adequate.
Load Capacity: Load capacity is the maximum weight a tire can safely support. Exceeding this limit places excessive strain on tires, which can worsen the effects of low tread. The Tire Information placard in your vehicle often lists the recommended load limits.
Vehicle Type: The type of vehicle affects how bald tires perform. For instance, larger vehicles with higher weight, like SUVs and trucks, may exhibit more tire wear compared to lighter vehicles. Thus, bald tires on heavier vehicles pose a greater risk.
Terrain Conditions: Terrain conditions influence tire performance. Driving on rough or uneven surfaces can accelerate tire wear. A study published in the Journal of Vehicle Engineering (2021) indicated that off-road driving can increase the likelihood of blowouts in bald tires compared to smooth, well-maintained roads.

Understanding these factors helps gauge the risks of driving on bald tires. Regular tire maintenance and timely replacement are crucial for safety on the road.

How Do Weather Conditions Impact Driving on Bald Tires?

Weather conditions significantly impact driving on bald tires by increasing the risks of loss of traction, longer stopping distances, and heightened susceptibility to hydroplaning.

• Loss of traction: Bald tires have reduced tread depth. Tread depth provides grip on wet or slippery surfaces. According to the National Highway Traffic Safety Administration (NHTSA), bald tires can cause a 15% decrease in traction. This means that vehicles with bald tires struggle to maintain contact with the road during adverse weather conditions, such as rain, snow, or ice.

• Longer stopping distances: Bald tires cannot dissipate water effectively like tires with deeper treads. A 2018 study by the Tire Rack showed that vehicles on bald tires may require up to 70% longer to stop on wet roads compared to vehicles with properly treaded tires. This can lead to increased stopping distances and a greater likelihood of collisions.

• Hydroplaning susceptibility: A lack of tread increases the chances of hydroplaning, which occurs when water builds up in front of the tires. When tires lose contact with the road, steering and braking control diminishes. The AAA reports that hydroplaning can occur at speeds as low as 30 miles per hour on wet roads. The risk becomes significantly greater with bald tires, as they cannot channel water away from the contact surface.

• Reduced performance in snow and ice: Bald tires also perform poorly in snowy or icy conditions. Winter tires, which have specialized tread designs, increase grip in these conditions. A research study published in the Journal of Transportation Safety & Security found that tires with minimal tread depth had nearly double the crash risk in winter conditions compared to those with adequate tread.

Due to these factors, drivers using bald tires should be particularly cautious in adverse weather conditions. Keeping tires well-maintained and replacing bald tires can enhance vehicle safety and performance.

What Are the Risks of Driving on Bald Tires for Too Long?

Driving on bald tires poses significant risks that can lead to accidents and other safety issues.

Reduced Traction
Increased Stopping Distance
Hydroplaning Risk
Tire Blowouts
Decreased Fuel Efficiency
Legal and Financial Consequences

Driving on bald tires decreases the vehicle’s ability to grip the road. This increases the likelihood of accidents, especially in wet or slippery conditions. It is essential for drivers to understand how bald tires compromise safety.

Reduced Traction: Reduced traction occurs when tire tread is worn down to a point where it cannot properly grip the road. Tires require tread to channel water and provide friction. According to the National Highway Traffic Safety Administration (NHTSA), a tire with less than 2/32 of an inch of tread does not effectively grip the road. In practice, this results in longer stopping distances and more slipping during turns.
Increased Stopping Distance: Increased stopping distance is a direct consequence of reduced tire tread. Studies have shown that worn-out tires can increase stopping distances by up to 66% in wet conditions. The AAA Foundation for Traffic Safety emphasizes that poor tire performance is a significant contributor to road accidents.
Hydroplaning Risk: Hydroplaning occurs when a vehicle’s tires lose contact with the road due to water film. Bald tires lack adequate tread to disperse water, making a vehicle more susceptible to hydroplaning. The American Automobile Association (AAA) explains that even a small amount of water can cause this issue, leading to loss of control while driving.
Tire Blowouts: Tire blowouts happen when tires suffer structural failures, often exacerbated by excessive wear. According to the Tire Industry Association, bald tires are five times more likely to experience a blowout compared to well-maintained tires. This can result in sudden loss of vehicle control.
Decreased Fuel Efficiency: Decreased fuel efficiency occurs when tires are worn down. Bald tires create more rolling resistance, requiring more energy (and fuel) to maintain speed. A study by the Tire and Rubber Association of Canada indicates that properly inflated and maintained tires can improve fuel efficiency by as much as 10%.
Legal and Financial Consequences: Legal and financial consequences arise from driving on bald tires. In many jurisdictions, it is illegal to drive with tires that do not meet minimum tread requirements. Drivers could face fines or increased insurance rates if involved in an accident due to negligence regarding tire condition. The National Safety Council warns that such violations can have significant repercussions beyond just legal issues.

Drivers should regularly inspect their tires and replace them when tread wear becomes excessive. Understanding these risks can help maintain road safety and reduce potential accidents.

When Is It Time to Replace Bald Tires?

It is time to replace bald tires when the tread depth reaches 2/32 of an inch or less. Tread depth is crucial for maintaining traction and control on wet and dry roads. To check the tread depth, you can use the penny test. Insert a penny into the tire tread with Lincoln’s head facing down. If you can see all of Lincoln’s head, the tires are too bald and need replacement. Additionally, inspect for visible signs of wear, such as cracks or bulges. If you notice any damage, replace the tires immediately. Driving on bald tires increases the risk of hydroplaning and reduces braking effectiveness. Therefore, prioritize tire replacement for safety and optimal vehicle performance.

What Are the Best Practices for Tire Replacement?

The best practices for tire replacement ensure both safety and performance. Regularly replacing tires according to the manufacturer’s guidelines is crucial.

Assess Tire Condition.
Follow Manufacturer Guidelines.
Replace in Sets.
Choose the Right Type of Tire.
Pay Attention to Tread Depth.
Monitor Tire Age.
Rotate Tires Regularly.

Tire replacement involves multiple factors that influence safety and vehicle efficiency. Each point discussed below will provide essential details that can guide drivers in making informed decisions.

Assess Tire Condition: Assessing tire condition involves visually examining tires for signs of wear, damage, or irregularities. Drivers should check for cracks, bulges, or uneven wear. The National Highway Traffic Safety Administration recommends inspecting tires monthly for any signs of wear or damage. Ignoring these signs can lead to tire failure, which poses severe safety risks.
Follow Manufacturer Guidelines: Following manufacturer guidelines is essential for selecting the right tire specification based on vehicle type and driving conditions. Vehicle manufacturers include tire specifications in the owner’s manual, detailing suitable tire types, sizes, and performance ratings. For example, using all-season tires in winter conditions may result in poor traction, leading to accidents.
Replace in Sets: Replacing tires in sets, preferably all four, is advisable for maintaining balanced handling and stability. When tires are replaced in pairs or individually, differences in tread depth can affect vehicle dynamics. The Tire Industry Association emphasizes that replacing all tires together is the best practice for performance and safety.
Choose the Right Type of Tire: Choosing the right type of tire caters to specific driving conditions and preferences. Options include summer, winter, and all-terrain tires. Research by the U.S. Tire Manufacturers Association indicates that using the correct tire type can significantly improve traction and handling. For instance, winter tires are specifically designed to perform in cold conditions, while summer tires excel in warm weather.
Pay Attention to Tread Depth: Paying attention to tread depth is critical for ensuring optimal grip and performance. Tires should be replaced when tread depth falls below 2/32 of an inch. The American Automobile Association (AAA) recommends using the “penny test,” where placing a penny in the tread will reveal whether the tread is adequate for safe driving. Insufficient tread can increase stopping distances, particularly in wet conditions.
Monitor Tire Age: Monitoring tire age involves checking the manufacturing date, as tires can degrade over time. The Rubber Manufacturers Association suggests replacing tires more than six years old, regardless of tread wear. Aging tires may develop dry rot or other issues that can compromise safety, even if they appear visually adequate.
Rotate Tires Regularly: Rotating tires regularly distributes wear more evenly, prolonging tire life and improving vehicle handling. The general recommendation is to rotate tires every 5,000 to 8,000 miles or during oil changes. NHTSA data shows that proper tire rotation can extend tire life by up to 20%, reducing overall replacement costs.

By incorporating these practices into regular vehicle maintenance, drivers can significantly enhance safety, performance, and longevity of their tires, ensuring better performance on the road.

How Can You Measure Tread Depth on Tires?

You can measure tread depth on tires using a simple coin test, a tread depth gauge, or a ruler. Each method provides a reliable way to ensure tire safety.

The coin test: This method uses a quarter or penny to measure tread depth. Insert the coin into the tread grooves. For a quarter, if President Washington’s head is visible, the tread is too worn and needs replacement. A penny serves the same purpose; if Lincoln’s head is visible, it indicates insufficient tread depth.

A tread depth gauge: This tool provides an accurate measurement in both millimeters and 32nds of an inch. Insert the probe of the gauge into the deepest groove of the tire tread. The reading on the gauge indicates the depth. Most experts recommend replacing tires when tread depth is 2/32 inches (1.6 mm) or less.

Using a ruler or a caliper: A ruler can also measure tread depth accurately. Place a flat ruler alongside the tire tread with one end on the ground. Measure from the ground to the highest point in the tread groove. A caliper offers precision and is particularly useful for measuring smaller depths.

Regularly checking tread depth is crucial for vehicle safety. According to the National Highway Traffic Safety Administration (NHTSA) in 2021, inadequate tire tread depth can lead to reduced traction, especially on wet surfaces, increasing the risk of accidents. Keeping tires at a safe tread depth is essential for ensuring vehicle performance and safety.

What Consequences Can Arise from Delaying Tire Replacement?

Delaying tire replacement can lead to serious safety, performance, and financial consequences.

Increased risk of accidents
Reduced vehicle performance
Higher fuel consumption
Increased tire wear on other components
Greater repair costs
Legal liability in case of an accident

Delaying tire replacement can significantly alter vehicle safety and performance, impacting both the driver and other road users.

Increased Risk of Accidents: Delaying tire replacement leads to an increased risk of accidents. Worn tires can fail to provide adequate grip on the road. According to the National Highway Traffic Safety Administration (NHTSA), approximately 11,000 crashes each year result from tire-related issues. For instance, tires with low tread depth can lose traction on wet surfaces, significantly increasing the likelihood of skidding.
Reduced Vehicle Performance: Delayed tire replacement results in reduced vehicle performance. Worn tires can negatively affect braking distances and handling. The tire’s contact with the road diminishes, which impacts the car’s stability and responsiveness during turns. A study by the Automotive Engineering Society indicates that vehicles on worn tires necessitate up to twice the braking distance on wet surfaces.
Higher Fuel Consumption: Delaying tire replacement can lead to higher fuel consumption. Worn tires have increased rolling resistance, meaning the engine must exert more power to maintain speed. As a result, fuel efficiency decreases. The U.S. Department of Energy states that under-inflated or worn tires can reduce fuel efficiency by 0.2% per psi under the recommended level.
Increased Tire Wear on Other Components: Delaying tire replacement may cause increased tire wear on other vehicle components, such as brakes and suspension systems. Poor tire condition can result in misalignment, causing uneven wear on the vehicle’s braking system. A report from the Institute of Road Traffic Education shows that maintaining good tire health can extend the life of braking components by about 20%.
Greater Repair Costs: Delaying tire replacement leads to greater overall repair costs. Worn tires can cause additional damage to the vehicle, increasing the frequency of necessary repairs. The American Automobile Association (AAA) suggests that regular maintenance of tires can save drivers about $600 annually in unexpected repairs.
Legal Liability in Case of an Accident: Delaying tire replacement can create legal liability in case of an accident. If a crash occurs due to tire failure, the driver may face legal consequences. Insurance companies may deny claims if it is found that neglected tire maintenance contributed to the accident.

In conclusion, delaying tire replacement can have immediate and long-term consequences. It is essential for drivers to remain proactive in monitoring tire conditions to ensure safety and vehicle performance.

Related Post:

How Long Can You Ride on Bald Tires? Safety Risks and Replacement Tips for Drivers