How To Match Tire Pressure Sensors: Tips For TPMS Reset And Settings [Update On 2024]

To match the TPMS sensors on a 2017 Subaru Outback Limited, visit a dealer with a service computer or press the reset button in the glove box. Check the recommended tire pressure on the driver’s side door panel. Drive a few miles after making adjustments for the new tire pressure reading to register properly.

After resetting, drive the vehicle for a short distance. This action helps the system recognize the new sensor data. If your vehicle has a display, check it for any error messages or alerts. Adjust the tire pressures to match the specifications listed on the driver’s side door jamb or in the owner’s manual.

Monitoring tire pressure decreases the risk of uneven wear and improves fuel efficiency. Following these steps ensures that you achieve accurate readings for each tire.

In the next section, we will explore troubleshooting common issues that can arise if the TPMS fails to reset properly, and how to effectively address them for optimal tire performance.

Table of Contents

What Are Tire Pressure Sensors and Why Are They Essential for My 2017 Subaru?

Tire pressure sensors monitor the air pressure in your vehicle’s tires. They are essential for your 2017 Subaru because they enhance safety, improve fuel efficiency, and promote tire longevity.

Main points related to tire pressure sensors include:
1. Safety Enhancement
2. Fuel Efficiency
3. Tire Longevity
4. Alert System
5. Maintenance Awareness

Tire pressure sensors play a vital role in vehicle operation by monitoring tire pressure levels and alerting the driver to any issues.

Safety Enhancement: Tire pressure sensors improve safety by preventing under-inflated tires. Under-inflation can lead to blowouts, which may cause accidents. Research indicates that adequately inflated tires decrease the likelihood of severe crashes. The National Highway Traffic Safety Administration reports that proper tire pressure can reduce the risk of tire-related crashes by up to 33%.
Fuel Efficiency: Tire pressure sensors help maintain optimal tire pressure, which affects fuel efficiency. Properly inflated tires can enhance mileage and reduce fuel costs. According to the U.S. Department of Energy, maintaining tire pressure at the recommended levels can boost fuel economy by 0.6% to 3%. Over time, this saving can be substantial.
Tire Longevity: Tire pressure sensors contribute to increased tire life by promoting proper inflation. Well-inflated tires wear evenly, extending their usability. Studies by the Tire Industry Association show that maintaining correct tire pressure can increase tire lifespan by up to 30%.
Alert System: Tire pressure sensors provide real-time alerts when pressure drops, allowing for timely interventions. This proactive approach helps drivers address potential tire issues before they escalate into safety hazards. The system usually triggers a dashboard warning light to prompt driver action.
Maintenance Awareness: Tire pressure sensors promote awareness of tire maintenance. By keeping track of tire pressure levels, drivers are more likely to engage in regular checks and service their vehicles. Regular maintenance can include tire rotation, balancing, and alignment checks, leading to overall better vehicle performance.

In conclusion, tire pressure sensors are essential for your 2017 Subaru because they significantly enhance driving safety, improve fuel efficiency, promote tire longevity, provide alerts for immediate issues, and raise awareness for ongoing vehicle maintenance.

How Can I Identify the Tire Pressure Sensors on My 2017 Subaru?

To identify the tire pressure sensors on your 2017 Subaru, check the tire valve stems, observe any warning lights on the dashboard, and refer to the owner’s manual for location details.

Tire valve stems: Tire pressure sensors (TPMS) are typically installed directly within the tire valve stems. Each tire will have a sensor that monitors the tire pressure and relays the data to your vehicle’s system. Inspecting the valve stems for a small cylindrical unit can help you locate the sensors.
Warning lights: Your Subaru’s dashboard features a tire pressure warning light. If this light illuminates, it indicates that one or more tire pressures are low, which usually signifies an issue with the tire pressure sensors. This may point to a malfunction or a need for recalibration.
Owner’s manual: The owner’s manual contains specific information on tire pressure sensor locations. This documentation includes diagrams and instructions that explicitly show where to find the sensors in your vehicle, ensuring you have the correct location and information for maintenance or replacement.

If necessary, consult a certified Subaru technician for further assistance in identifying and maintaining your tire pressure sensors effectively.

What Are the Common Symptoms Indicating a Faulty Tire Pressure Sensor in a 2017 Subaru?

The common symptoms indicating a faulty tire pressure sensor in a 2017 Subaru include the following:

Warning Light Activation
Inaccurate Pressure Readings
Consistent Pressure Fluctuations
Sensor Malfunction Notifications
Reduced Fuel Efficiency
Increased Tire Wear

These symptoms can indicate a serious issue that requires attention. Understanding these signs can help ensure safe driving and vehicle efficiency.

Warning Light Activation:
The warning light activation occurs when the tire pressure monitoring system (TPMS) signals a malfunction. This light illuminates on the dashboard if one or more sensors fail or if tire pressures fall below a safe threshold. According to Subaru’s user manual, consistent illumination of this light points to potential sensor issues, leading drivers to inspect tire pressures regularly.
Inaccurate Pressure Readings:
Inaccurate pressure readings happen when sensors provide incorrect data regarding tire inflation levels. This issue can mislead the driver into thinking all tires are adequately inflated while they may not be. A study by the National Highway Traffic Safety Administration (NHTSA) found that one-third of drivers do not know their tire pressures, which can result from sensor inaccuracies, affecting vehicle safety.
Consistent Pressure Fluctuations:
Consistent pressure fluctuations refer to irregular changes in tire pressure readings despite stable external conditions. This symptom often signifies sensor problems or interference. A report by the Tire Industry Association notes that such fluctuations contribute to unpredictable handling and increased wear on tires, which may put drivers at risk.
Sensor Malfunction Notifications:
Sensor malfunction notifications appear on the dashboard as an alert when a sensor cannot communicate with the vehicle’s computer. This situation often results from battery failure in the sensor or damage to the sensor itself. The Subaru technical service bulletin from 2019 outlines the need for prompt sensor replacement when these alerts occur to maintain proper vehicle performance.
Reduced Fuel Efficiency:
Reduced fuel efficiency can stem from inaccurate tire pressure readings affecting tire performance. Under-inflated tires cause increased rolling resistance, which can decrease fuel economy. According to the U.S. Department of Energy, maintaining proper tire pressures can improve fuel efficiency by up to 3%. Thus, faulty sensors leading to under-inflation can have an economic impact on fuel costs.
Increased Tire Wear:
Increased tire wear can result from faulty tire pressure sensors leading to incorrect inflation levels. Over-inflation or under-inflation can cause uneven tire wear, potentially leading to premature tire replacement. Research published by the Tire Rack indicates that proper tire maintenance and monitoring can extend tire life by 25-50%.

These symptoms are essential for detecting issues with tire pressure sensors. Promptly addressing these can lead to safer vehicles and improved performance.

How Do I Match Tire Pressure Sensors Correctly on a 2017 Subaru?

To match the tire pressure sensors correctly on a 2017 Subaru, follow these steps: ensure the tire pressures are set correctly, then reset the Tire Pressure Monitoring System (TPMS) through the vehicle’s settings or by driving the car.

First, check the tire pressures:

Maintain recommended tire pressure: The correct tire pressure for a 2017 Subaru can typically be found on a sticker located on the driver’s side door jamb. It is essential to inflate the tires to these specifications.
Inspect each tire: Use a reliable tire pressure gauge to check the pressure in all four tires, including the spare if equipped with a sensor.

Next, reset the TPMS:

Locate the TPMS reset button: The reset button is often found beneath the steering wheel or in the glove compartment. Consult the owner’s manual for specific instructions.
Set the vehicle to the “On” position: Do not start the engine but turn the ignition key to the “On” position without starting the vehicle.
Press the TPMS reset button: Hold the button until the TPMS indicator light blinks three times, then release it. This process may vary slightly depending on the model.
Drive the vehicle: Driving for approximately 10 to 30 minutes at speeds above 15 mph helps the system recalibrate. The TPMS indicator light should turn off, indicating successful matching.

By accurately checking tire pressures and properly resetting the TPMS, you ensure that the tire pressure sensors function effectively. This accuracy enhances vehicle safety, optimizes tire performance, and improves fuel efficiency.

What Step-by-Step Process Should I Follow to Reset the TPMS After Matching Sensors?

To reset the Tire Pressure Monitoring System (TPMS) after matching sensors, follow a systematic step-by-step process.

Gather necessary tools.
Ensure all tire pressures are adjusted properly.
Access the vehicle’s TPMS reset button.
Turn on the ignition without starting the engine.
Press and hold the TPMS reset button.
Release the button after the TPMS light blinks three times.
Wait for the TPMS light to turn off.

This process is straightforward, but there can be varying opinions on the necessity of each step based on vehicle make and model, as some vehicles may automatically reset.

Gather Necessary Tools:
Gather all required tools before starting the reset process. Tools may include a tire pressure gauge, an air compressor, and the vehicle’s manual for specific instructions.
Ensure Proper Tire Pressures:
Check that all tires are inflated to the recommended pressure levels. Properly inflated tires ensure the TPMS functions correctly and effectively communicates accurate data.
Access the TPMS Reset Button:
Locate the TPMS reset button. This button is typically found under the steering wheel or near the console, but the exact location can vary depending on the vehicle model.
Turn On Ignition:
Turn the ignition key to the “on” position. This action powers the vehicle’s electronic systems without starting the engine and prepares the TPMS for the reset process.
Press and Hold the TPMS Reset Button:
Press and hold the reset button until the TPMS light blinks three times. This action indicates that the system is entering reset mode.
Release the Button:
Release the reset button after observing the three blinks. This finalizes the command for the TPMS to start the recalibration process.
Wait for Light to Turn Off:
Observe the TPMS light after releasing the button. If it turns off, the reset is successful. If it remains on, repeat the process or consult the vehicle’s manual for troubleshooting steps.

Following this detailed approach to resetting the TPMS after sensor matching can ensure effective monitoring of tire pressures, leading to safer driving conditions.

How Can I Confirm Accurate Readings from My Tire Pressure Sensors After Matching?

To confirm accurate readings from your tire pressure sensors after matching, you should follow a few essential steps including using a reliable tire pressure gauge, checking the readings against vehicle specifications, and observing the sensor behavior during driving.

Use a reliable tire pressure gauge: A high-quality gauge can provide precise pressure readings. Manual or digital gauges are effective tools. Always choose a gauge that has been calibrated recently. This minimizes discrepancies between your gauge and the vehicle’s sensor readings.
Check the readings against vehicle specifications: Refer to your vehicle’s owner manual for the recommended tire pressure values. These values vary by make and model and should be used as a benchmark to determine accuracy. Proper tire pressure typically ranges between 30 to 35 PSI for most passenger vehicles.
Observe sensor behavior during driving: Accurate tire pressure sensors often provide consistent readings while driving. Pay attention to any warnings or alerts that might appear on your dashboard. If the alerts are frequent or do not match your manual gauge’s readings, further inspection may be needed.
recalibrate if necessary: If sensor discrepancies occur, consider recalibrating the sensors according to the manufacturer’s guidelines. This procedure can often be performed through the vehicle’s onboard system or by a professional mechanic.
Perform regular visual inspections: Regularly check your tires for visible signs of wear or damage. This ensures that the physical condition of the tires matches the expected performance indicated by the sensors.

Following these steps ensures that you can effectively verify the accuracy of your tire pressure sensor readings, contributing to safer driving and better vehicle maintenance.

What Tools Will I Need for Successfully Matching Tire Pressure Sensors on My 2017 Subaru?

To successfully match tire pressure sensors on your 2017 Subaru, you will need specific tools to facilitate the process.

Tools Required:
1. Tire pressure monitoring system (TPMS) tool
2. Digital tire pressure gauge
3. Vehicle owner’s manual
4. OBD-II scanner (optional)
5. Air compressor (if necessary)

The following sections will provide detailed explanations of each tool you will need for successful matching of tire pressure sensors.

Tire Pressure Monitoring System (TPMS) Tool:
A TPMS tool is essential for programming or reprogramming tire pressure sensors. This tool communicates with the vehicle’s TPMS via radio frequency and allows for the identification and matching of new tire pressure sensors. Most TPMS tools can also read sensor IDs, making it easier to pair sensors to your Subaru.
Digital Tire Pressure Gauge:
A digital tire pressure gauge measures the tire pressure accurately. Maintaining the correct pressure is crucial for the TPMS to function properly. A digital gauge provides precise readings, which is essential when adjusting pressures before or after sensor matching.
Vehicle Owner’s Manual:
The vehicle owner’s manual contains detailed instructions specific to your 2017 Subaru regarding the TPMS. It provides information about the sensor locations and reset procedures. Referring to the manual ensures you follow manufacturer-recommended protocols during matching.
OBD-II Scanner (Optional):
An OBD-II scanner can read and clear diagnostic trouble codes from your vehicle. Although not always necessary for matching tire pressure sensors, it can be useful if you encounter any error codes related to the TPMS. Scanners that have TPMS functionalities can also help reset or initialize sensors.
Air Compressor (If Necessary):
An air compressor is useful for adjusting tire pressure to the recommended levels. Proper tire pressure is essential for the TPMS to function correctly and to ensure safe driving conditions. Having an air compressor on hand allows for easy adjustments as necessary.

What Actions Should I Take If the Tire Pressure Sensor Light Remains Illuminated After Resetting?

If the tire pressure sensor light remains illuminated after resetting, you should first check the tire pressures. Then, inspect the sensors, battery, and electrical connections. If the issue persists, seek professional help from a mechanic.

Check Tire Pressure
Inspect Tire Pressure Sensors
Examine Battery and Electrical Connections
Use an OBD-II Scanner
Seek Professional Assistance

To address these actions in detail, it’s important to consider each step closely and understand the implications behind them.

Checking Tire Pressure:
Checking tire pressure involves using a tire pressure gauge to measure the air pressure in all tires, including the spare. Accurate tire pressure is vital for safety and fuel efficiency. Underinflated or overinflated tires can trigger the warning light. The recommended pressure can usually be found on a sticker inside the driver’s door or in the owner’s manual. Regularly checking pressures can prevent issues before they escalate.
Inspecting Tire Pressure Sensors:
Inspecting tire pressure sensors involves visually checking whether the sensors are intact and unbroken. Tire Pressure Monitoring Systems (TPMS) use sensors to detect the air pressure in each tire. A malfunctioning sensor can cause the warning light to remain on even if the tire pressure is correct. If a sensor is damaged, it may need replacement to restore proper functionality.
Examining Battery and Electrical Connections:
Examining the battery and electrical connections of the tire pressure monitoring system is crucial as well. Each sensor is powered by a battery, which can wear out over time. Additionally, loose or corroded connections can hinder the effective communication between the sensors and the car’s onboard system. Ensuring these components are secure and functional is essential for the TPMS to work correctly.
Using an OBD-II Scanner:
Let’s discuss using an OBD-II scanner. An OBD-II (On-Board Diagnostics) scanner can read trouble codes from the car’s computer. It can help to diagnose specific issues with the TPMS. When the scanner reveals error codes, you can better understand whether a sensor or other part of the system is defective. This step can save time and may prevent unnecessary repairs.
Seeking Professional Assistance:
Seeking professional assistance might be the best course of action if the above steps do not resolve the issue. A certified mechanic has the tools and expertise to diagnose and repair TPMS issues effectively. They can verify whether the problem lies with the sensors, wiring, or the vehicle’s computer system. Timely intervention by a professional can ensure safety and enhance the vehicle’s performance.

By following these steps, you can effectively address the persistent tire pressure sensor light and ensure your vehicle remains safe and efficiently operable.

Related Post:

How to Match Tire Pressure Sensors: Tips for TPMS Reset and Settings