The tire pressure monitoring system (TPMS) may show incorrect tire pressure due to various reasons. These include sensor age, which reduces functionality, corrosion from environmental factors, and wiring issues. Such problems can lead to inaccuracies in the tire pressure readings, affecting the proper operation of your vehicle.
Faulty sensors can also be a significant cause of this issue. Tire pressure monitoring systems (TPMS) use sensors within each tire to relay information to the driver. If these sensors malfunction, they may deliver incorrect readings. Additionally, prolonged exposure to moisture can corrode sensors, leading to failure.
Another cause is improper installation or calibration of the TPMS. If the sensors were not correctly installed after tire rotation or replacement, they might yield incorrect data.
Solutions include regularly checking tire pressure with a reliable gauge and monitoring tire conditions. If a sensor is suspected to be faulty, replacing it becomes necessary. Ensuring proper tire maintenance can prevent discrepancies in tire pressure readings.
Understanding these causes aids in addressing the problem efficiently. In the following section, we will explore how to effectively maintain tire pressure and ensure your vehicle’s performance remains optimal.
What Causes My Car to Read Wrong Tire Pressure?
The car may read wrong tire pressure due to several factors, including tire damage, ambient temperature changes, sensor malfunction, or incorrect calibration.
- Tire damage
- Temperature changes
- Sensor malfunction
- Incorrect calibration
- Improper inflation technique
- Faulty inflation tools
Understanding these causes can help you identify and resolve tire pressure readings.
1. Tire Damage:
Tire damage causes inaccurate pressure readings. Damage may include punctures, cuts, or deformities that lead to air loss. According to the National Highway Traffic Safety Administration (NHTSA), damaged tires can lose air rapidly. A study by the Tire Industry Association indicates that underinflated tires affect vehicle handling, leading to safety risks.
2. Temperature Changes:
Temperature changes significantly affect tire pressure. Tire pressure decreases by about 1 PSI (pound per square inch) for every 10°F drop in temperature. As noted by the U.S. Department of Transportation, colder weather can result in tire pressure readings that are lower than actual levels. Regular checks during seasonal changes prevent this issue.
3. Sensor Malfunction:
Sensor malfunctions can lead to incorrect tire pressure readings. Most modern vehicles use Tire Pressure Monitoring Systems (TPMS) that can produce false alerts. Research conducted by the SAE International reveals that faulty sensors account for up to 30% of TPMS inaccuracies. Routine maintenance can prevent sensor-related issues.
4. Incorrect Calibration:
Incorrect calibration of the Tire Pressure Monitoring System can cause erroneous readings. If the TPMS is not calibrated post-service or tire change, it may report inaccurate data. The Vehicle Safety Act emphasizes that vehicle owners should ensure regular calibration to guarantee safety and compliance.
5. Improper Inflation Technique:
Improper inflation technique can lead to inaccurate pressure readings. Inflating tires too much or too little can cause discrepancies in pressure gauge readings. Various tire experts recommend following manufacturer guidelines for optimal pressure, which helps maintain vehicle performance.
6. Faulty Inflation Tools:
Faulty inflation tools can lead to misleading tire pressure readings. Using a defective pressure gauge or compressor can produce inconsistent results. The American Society for Testing and Materials (ASTM) states that regularly testing and maintaining inflation tools ensures accuracy.
Overall, checking and maintaining the tire pressure system effectively can reduce the occurrence of incorrect tire pressure readings and enhance your vehicle’s safety and performance.
How Does Temperature Fluctuation Affect Tire Pressure Readings?
Temperature fluctuation significantly affects tire pressure readings. As temperature increases, the air inside the tire expands. This expansion raises the tire pressure. Conversely, when the temperature drops, the air contracts, leading to lower tire pressure. This relationship follows the ideal gas law, which states that for a given volume, pressure and temperature are directly related.
For example, a change of 10 degrees Fahrenheit can alter tire pressure by approximately 1 PSI (pound per square inch). Therefore, if you check your tire pressure during a hot day and then again in the cold of night, you may notice different readings.
Understanding this fluctuation warns drivers to check their tire pressures at consistent temperatures, preferably when tires are cold, to ensure accurate readings. Regular monitoring helps maintain optimal tire performance and safety. Thus, temperature fluctuations directly impact tire pressure readings, and drivers should be mindful of these changes to avoid under-inflation or over-inflation.
What Impact Does Altitude Have on My Tire Pressure Accuracy?
Altitude affects tire pressure accuracy due to the change in air density and temperature. As altitude increases, the air pressure decreases, which can lead to a decrease in tire pressure readings.
- Decreased Air Pressure
- Temperature Variations
- Tire Expansion
- Instrument Calibration
The interplay of these factors is significant in understanding how altitude impacts tire pressure accuracy and should be taken into account for safe driving at high elevations.
-
Decreased Air Pressure:
Decreased air pressure occurs at higher altitudes due to the lower density of air. As you ascend, the atmospheric pressure reduces, influencing the air inside your tires. According to the National Highway Traffic Safety Administration (NHTSA), tire pressure decreases approximately 1 psi for every 10°F drop in temperature. This indicates that, as you climb in altitude, tire pressure can drop, leading to potential inaccuracies in pressure readings. -
Temperature Variations:
Temperature variations at high altitudes can affect tire pressure. Tires heat up when driving, which increases the internal air pressure. If the ambient temperature is lower, the pressure may not increase as much compared to driving at lower altitudes. A study by the Tire Industry Association highlights that a 20°F temperature drop can cause a pressure change of about 2 psi. Therefore, it’s essential to adjust your expectations based on both altitude and temperature conditions. -
Tire Expansion:
Tire expansion refers to the increase in tire volume when the air inside becomes heated due to driving friction. At higher altitudes, although the initial pressure may be lower, the heated air could still expand, potentially leading to over-inflation if not regularly monitored. The Rubber Manufacturers Association advises checking tire pressure before and after long drives at varying altitudes to ensure they remain within manufacturer specifications. -
Instrument Calibration:
Instrument calibration involves ensuring that tire pressure monitoring systems (TPMS) are correctly programmed to account for changes in altitude. If the system is not calibrated for altitude differences, it may provide inaccurate readings. According to the Society of Automotive Engineers (SAE), accurate calibration of TPMS is vital, particularly for vehicles frequently driven in variable elevations. Regular checks and recalibration can help maintain proper tire pressure accuracy across different terrains.
These factors illustrate the complex relationship between altitude and tire pressure accuracy. It is vital to monitor tire pressure regularly, especially when driving at higher elevations, to ensure optimal vehicle performance and safety.
What Are the Warning Signs of Incorrect Tire Pressure?
The warning signs of incorrect tire pressure include uneven wear on tires, changes in vehicle handling, and warning lights on the dashboard.
- Uneven tire wear
- Changes in vehicle handling
- Warning lights on the dashboard
- Decreased fuel efficiency
- Increased road noise
- Flat or bulging tires
Understanding these warning signs is crucial for maintaining your vehicle’s safety and performance. Now, let’s explore each sign in detail.
-
Uneven Tire Wear: Uneven tire wear indicates incorrect tire pressure. When tires are under-inflated, the outer edges wear faster. Conversely, over-inflated tires wear more in the center. The Tire Industry Association states that improper tire inflation can reduce tire life by up to 25%. Regularly checking tire tread can help identify this issue early.
-
Changes in Vehicle Handling: Changes in vehicle handling, such as pulling to one side or a bouncy ride, can suggest improper tire pressure. Under-inflated tires increase rolling resistance, which can affect steering control. A 2019 study by the National Highway Traffic Safety Administration highlighted that vehicles with incorrect tire pressure are three times more likely to be involved in accidents due to handling issues.
-
Warning Lights on the Dashboard: Warning lights, such as the Tire Pressure Monitoring System (TPMS) light, alert drivers to low tire pressure. This system, mandated in the U.S. since 2000, activates when tire pressure drops 25% or more below the recommended level. Ignoring this warning can lead to unsafe driving conditions.
-
Decreased Fuel Efficiency: Decreased fuel efficiency often results from incorrect tire pressure. Research by the U.S. Department of Energy indicates that under-inflated tires can decrease fuel efficiency by 0.2% for every 1 psi drop in pressure. Maintaining proper tire inflation can lead to significant savings at the pump.
-
Increased Road Noise: Increased road noise may signal incorrect tire pressure. Under-inflated tires can cause excessive deformation, leading to vibrations that create noise. A study from the Institute of Road Traffic Education suggests that excessive noise can also distract drivers, potentially leading to accidents.
-
Flat or Bulging Tires: Flat or bulging tires are clear signs of low pressure. A bulging tire may indicate a severe problem, such as a blowout risk. According to Consumer Reports, checking tire pressure monthly can help prevent such hazardous situations and ensure safety on the road.
Being aware of these signs allows drivers to maintain tire health proactively, ensuring safety and efficiency.
Which Dashboard Warning Lights Indicate Tire Pressure Issues?
The warning lights that indicate tire pressure issues are the Tire Pressure Monitoring System (TPMS) warning light and the tire pressure symbol.
- Tire Pressure Monitoring System (TPMS) warning light
- Tire pressure symbol
The importance of understanding these indicators cannot be overstated, as they play a vital role in vehicle safety and performance.
-
Tire Pressure Monitoring System (TPMS) Warning Light:
The Tire Pressure Monitoring System (TPMS) warning light illuminates when one or more tires are significantly under-inflated or when a tire pressure sensor malfunctions. This system continuously monitors tire pressure and alerts the driver when it falls below a recommended level. The National Highway Traffic Safety Administration (NHTSA) mandates TPMS in all vehicles manufactured after 2007, citing that properly inflated tires can enhance fuel efficiency and improve vehicle handling. A study by the Rubber Manufacturers Association found that under-inflated tires contribute to more than 600 fatalities each year, highlighting the importance of timely responses to this warning light. -
Tire Pressure Symbol:
The tire pressure symbol visually resembles an exclamation mark inside a horseshoe shape. This symbol may appear orange or yellow, indicating a precaution. It signals that one or more tires may be under-inflated or that tire pressure needs checking. In some vehicles, the symbol may blink for a few seconds, indicating the need for immediate action or that the TPMS is malfunctioning. Understanding this symbol can help prevent potential accidents caused by tire blowouts. For instance, an AAA report indicated that about 30% of drivers do not respond to tire pressure symbols, which can lead to dangerous driving conditions.
Every driver should prioritize checking tire pressure regularly to ensure vehicle safety and performance. Regular maintenance can prevent situations where warning lights are ignored, improving overall road safety.
How Can I Perform a Visual Inspection of My Tires?
You can perform a visual inspection of your tires by examining them for signs of damage, checking tread depth, and ensuring proper inflation. Each of these steps is essential for maintaining tire health and vehicle safety.
-
Damages and foreign objects: Inspect the tire sidewalls and tread for cuts, cracks, or bulges. These damages can lead to blowouts. Additionally, look for foreign objects, such as nails, embedded in the tire. A study from the National Highway Traffic Safety Administration (NHTSA, 2020) states that maintaining tire integrity is crucial for road safety.
-
Tread depth: Use the “penny test” to check tread depth. Insert a penny into the tread with Lincoln’s head upside down. If you can see all of Lincoln’s head, your tread is too worn, and it is time to replace the tire. Adequate tread depth is vital for traction, especially in wet conditions. The minimum tread depth recommended is 2/32 of an inch.
-
Proper inflation: Check the tire pressure using a pressure gauge. The recommended tire pressure for your vehicle is typically found on a sticker inside the driver’s side door or in the owner’s manual. Under-inflated tires can wear unevenly and increase fuel consumption, while over-inflated tires are prone to damage and decrease traction. A study published in the Journal of Automotive Engineering indicates that maintaining the correct tire pressure can improve fuel efficiency by up to 3%.
Performing regular visual inspections can significantly enhance safety, improve vehicle performance, and prolong tire life.
Why Do Tire Pressure Sensors Malfunction?
Tire pressure sensors can malfunction for several reasons. Common issues include sensor battery failure, physical damage, or poor calibration of the sensors. These malfunctions may result in inaccurate readings, which can affect vehicle safety and performance.
According to the National Highway Traffic Safety Administration (NHTSA), tire pressure monitoring systems (TPMS) are crucial for maintaining optimal tire pressure. Low tire pressure can lead to tire blowouts and decreased fuel efficiency, while high pressure can lead to uneven tire wear.
The underlying causes of tire pressure sensor malfunctions can be broken down into several parts:
- Battery Failure: Tire pressure sensors operate on batteries. When these batteries deplete, sensors stop functioning accurately.
- Physical Damage: Sensors can be damaged by strong impacts, such as hitting a pothole, or by exposure to extreme weather conditions.
- Improper Installation: If the sensors are not installed correctly, they may not provide accurate readings.
- Signal Interference: Interference from other electronic devices can disrupt the communication between the tire sensors and the vehicle’s onboard computer.
Technical terms related to this topic include:
- TPMS (Tire Pressure Monitoring System): A system that monitors tire pressure and alerts the driver when losses occur.
- Sensor Calibration: The process of adjusting the sensors to ensure that they provide accurate readings.
The mechanisms involved in tire pressure sensing include monitoring air pressure through a small sensor mounted in each tire. This sensor uses a piezoelectric element or a strain gauge to detect pressure changes. When tire pressure falls below a specified threshold, the sensor sends a signal to the vehicle’s onboard computer, triggering a warning light on the dashboard.
Specific conditions leading to sensor malfunctions include:
- Extreme Temperatures: Both high and low temperatures can impact the performance of tire pressure sensors. Cold temperatures can cause air in the tire to contract, lowering pressure, while extreme heat can affect battery life and sensor materials.
- Tire Rotation or Replacement: Mishandling during tire rotation or improper installation during tire replacement can disturb or damage sensors, resulting in malfunctions.
For example, if you replace a tire and fail to properly reinstall the sensor, the TPMS may give a false reading. This can lead to dangerous driving conditions if the actual tire pressure varies significantly from what is reported.
What Common Malfunctions Affect Tire Pressure Monitoring Systems?
Common malfunctions that affect Tire Pressure Monitoring Systems (TPMS) include sensor failure, battery depletion, and radio interference. These issues can lead to inaccurate tire pressure readings, which may compromise vehicle safety.
- Sensor failure
- Battery depletion
- Radio interference
- Improper installation
- Calibration issues
These common malfunctions can stem from various underlying causes, each impacting the performance of the TPMS in different ways.
-
Sensor Failure: Sensor failure occurs when the tire pressure sensors become malfunctioning or damaged. This can result from physical impacts, corrosion, or exposure to extreme environmental conditions. According to a study by the National Highway Traffic Safety Administration (NHTSA) in 2017, sensor damage can lead to up to 30% misreporting of tire pressures, increasing the risk of tire blowouts.
-
Battery Depletion: Battery depletion refers to the sensors’ small batteries losing power over time. Most TPMS sensors are designed to last around five to ten years, depending on usage and environmental conditions. An expired battery can prevent the sensors from transmitting accurate information. In a comprehensive review by the Tire Industry Association in 2019, it was noted that battery-related issues were responsible for approximately 17% of TPMS complaints.
-
Radio Interference: Radio interference affects the communication between the TPMS sensors and the vehicle’s onboard computer. Sources of interference can include electronic devices or systems within or outside the vehicle. Research by the Society of Automotive Engineers (SAE) in 2020 found that interference from neighboring vehicles equipped with similar systems could lead to false readings in up to 12% of cases.
-
Improper Installation: Improper installation of TPMS sensors can lead to functional issues. When tires are mounted or dismounted incorrectly, it can affect the placement of the sensors. The Tire Rack highlights that even a small misalignment can complicate sensor functionality, leading to inconsistent pressure readings.
-
Calibration Issues: Calibration issues can occur when the tire pressure monitoring system needs reprogramming after maintenance or tire changes. If the system is not calibrated correctly, it may provide inaccurate pressure readings. The Automotive Service Association (ASA) points out that improper calibration is a common oversight that may lead to erroneous TPMS alerts, potentially affecting vehicle handling and safety.
Understanding these common malfunctions allows vehicle owners to maintain optimal tire performance and safety standards.
How Can Miscalibrated Sensors Alter Pressure Readings?
Miscalibrated sensors can significantly alter pressure readings by providing inaccurate data that leads to improper decision-making in various applications. This inaccuracy can stem from several key factors:
-
Sensor Drift: Over time, sensors may drift from their original calibration settings due to environmental conditions or wear. This shift can result in readings that are consistently higher or lower than the actual pressure. For example, a sensor originally calibrated to read atmospheric pressure may start to record values that are off by 5% or more over time, affecting reliability.
-
Temperature Influence: Pressure sensors often measure temperature alongside pressure. If a sensor is not calibrated to account for temperature changes, it may produce erroneous readings. Studies, such as one by Miller et al. (2022), show that temperature fluctuations can cause pressure readings to vary by as much as 10% in certain environments.
-
Mechanical Damage: Physical damage to pressure sensors can lead to miscalibration. For instance, sensors that undergo repeated stress or trauma may misread pressure. A report from Johnson & Co. (2021) indicated that up to 20% of pressure sensors in industrial settings displayed faulty readings due to mechanical failures.
-
Software Malfunctions: Errors in the software that interprets sensor data can cause misleading pressure readings. If the algorithm designed to process the sensor output is flawed, it may miscalculate pressures. A study by Chen and Patel (2020) illustrated that improper software updates can lead to incorrect sensor outputs, with discrepancies of up to 15% in critical applications.
-
Environmental Factors: External influences such as humidity, altitude, and electromagnetic interference can alter sensor performance. According to an article in the Journal of Sensors (2023), pressure readings can fluctuate by 7% under high humidity conditions.
These factors illustrate that miscalibrated sensors can produce pressure readings that are unreliable, leading to potential failures in systems that rely on precise measurements. Ensuring proper calibration and regular maintenance can mitigate these issues.
What Steps Can I Take to Resolve Incorrect Tire Pressure Readings?
To resolve incorrect tire pressure readings, you can follow a series of systematic steps. These steps include checking the tire pressure manually, inspecting the tire pressure monitoring system (TPMS), recalibrating the TPMS if necessary, and consulting a professional if issues persist.
- Check tire pressure manually.
- Inspect the tire pressure monitoring system (TPMS).
- Recalibrate the TPMS if necessary.
- Consult a professional if issues persist.
To effectively solve incorrect tire pressure readings, let’s delve into each step in detail.
-
Check Tire Pressure Manually: Checking tire pressure manually involves using a reliable tire pressure gauge. Begin by ensuring the tires are cold, as pressure can increase with heat. Remove the valve cap, press the gauge onto the valve stem, and read the measurement. The ideal pressure for most vehicles is listed in the owner’s manual or inside the driver’s side door. According to the National Highway Traffic Safety Administration, maintaining proper tire pressure enhances fuel efficiency and safety.
-
Inspect the Tire Pressure Monitoring System (TPMS): The TPMS is designed to alert drivers of tire pressure issues. Inspect the system for any warning lights on the dashboard. If a light is illuminated, there may be a malfunction or issue in the system. Checking the TPMS sensors and wiring can help identify faults. The Institute of Transportation Engineers notes that regularly checking the TPMS can prevent mishaps related to incorrect tire pressures.
-
Recalibrate the TPMS If Necessary: Recalibrating the TPMS may be essential after changing tires or adjusting pressure. Follow the vehicle’s manual instructions for recalibration. It often involves turning the ignition on and pressing the TPMS reset button. Some vehicles may automatically recalibrate after a drive. According to the Tire Industry Association, it’s important to ensure the TPMS is accurately calibrated to reflect real-time pressures, enhancing performance and safety.
-
Consult a Professional If Issues Persist: If incorrect readings continue after executing the above steps, consult a professional mechanic. A qualified technician can diagnose deeper issues, such as faulty sensors or potential problems with the vehicle’s onboard computer systems. Sources like the American Automobile Association recommend routine maintenance checks to keep all vehicle systems, including the TPMS, functioning properly.
By following these steps, you can effectively address and resolve issues related to incorrect tire pressure readings.
When Should I Check and Adjust My Tire Pressure?
You should check and adjust your tire pressure at least once a month and before long trips. First, consider the cold tire pressure recommendation found on a sticker inside your driver’s door or in your vehicle’s manual. Second, check the tire pressure when the tires are cold, ideally before driving or after the car has been parked for at least three hours. This ensures an accurate reading. Use a reliable tire pressure gauge for the measurement. If the pressure is too low, inflate the tires to the recommended level. If the pressure is too high, release some air until it reaches the correct value. Regularly checking and adjusting your tire pressure improves safety, fuel efficiency, and tire longevity. Proper tire maintenance also aids in better vehicle handling and performance. Therefore, consistently monitor and maintain your tire pressure for optimal vehicle operation.
What Benefits Can Regular Tire Maintenance Provide?
Regular tire maintenance provides several significant benefits. These benefits include improved safety, enhanced fuel efficiency, extended tire lifespan, and better vehicle performance.
- Improved Safety
- Enhanced Fuel Efficiency
- Extended Tire Lifespan
- Better Vehicle Performance
Regular tire maintenance includes checking tire pressure, inspecting tread depth, and rotating tires. These practices help ensure safe driving conditions. Proper tire pressure enhances fuel efficiency by reducing rolling resistance. A well-maintained tire also lasts longer, saving replacement costs over time. Finally, well-maintained tires improve overall vehicle performance, providing better handling and traction in various driving conditions.
-
Improved Safety:
Improved safety is a primary benefit of regular tire maintenance. Properly inflated tires increase vehicle stability and control. According to the National Highway Traffic Safety Administration (NHTSA), underinflated tires are a factor in nearly 20% of tire-related crashes. Maintaining the correct tire pressure helps prevent blowouts and skids, thereby reducing the likelihood of accidents. Regular inspections can identify flaws such as cracks or bulges, further enhancing safety on the road. -
Enhanced Fuel Efficiency:
Enhanced fuel efficiency results from maintaining optimal tire pressure. Underinflated tires require more energy to roll, leading to higher fuel consumption. The U.S. Department of Energy states that maintaining proper tire pressure can improve fuel economy by up to 3%. Regular tire maintenance ensures that tires are inflated to the manufacturer’s recommended levels, thereby maximizing efficiency and potentially lowering fuel costs. -
Extended Tire Lifespan:
Extended tire lifespan is another key benefit of regular maintenance. Tires that are rotated regularly and checked for uneven wear last longer than neglected tires. The Tire Industry Association notes that proper maintenance can extend tire life by up to 25%. A well-maintained tire can withstand various driving conditions better, reducing the frequency of replacements, which is not only cost-effective but also environmentally friendly. -
Better Vehicle Performance:
Better vehicle performance is a crucial advantage of routine tire care. Well-maintained tires improve traction, handling, and braking. According to a study by Consumer Reports, tires that are regularly rotated and balanced provide significantly better driving experience and overall vehicle responsiveness. For example, when tires have consistent tread depth and pressure, vehicles can navigate rain or snow more effectively, ensuring driver confidence and control.
Overall, regular tire maintenance is essential for enhancing safety, fuel efficiency, tire lifespan, and vehicle performance.
What Actions Should I Take If My Tire Pressure Warning Light Remains On?
If your tire pressure warning light remains on, take immediate action to check and address your tire pressure.
- Check tire pressure with a reliable gauge.
- Inspect tires for visible damage or punctures.
- Verify if the warning light resets after adjustments.
- Monitor the tire pressure regularly.
- Consult a professional mechanic if the light persists.
- Consider potential issues with the tire pressure monitoring system.
Taking prompt action is crucial to ensure your safety and vehicle performance.
1. Check Tire Pressure with a Reliable Gauge:
Checking tire pressure with a reliable gauge is essential. Correct tire pressure impacts handling and fuel efficiency. According to the National Highway Traffic Safety Administration (NHTSA), under-inflated tires can reduce fuel efficiency by up to 3%. Ensure you use a quality gauge for accurate readings, which can vary depending on the type of tires a vehicle uses.
2. Inspect Tires for Visible Damage or Punctures:
Inspecting tires for visible damage or punctures is a vital step. Look for any cuts, bulges, or foreign objects embedded in the tire. Minor damage can lead to air leaks or safety concerns while driving. Regular inspections can prevent bigger issues, as highlighted by the Tire Industry Association, which notes that approximately 10% of tire-related accidents are due to poor tire maintenance.
3. Verify if the Warning Light Resets After Adjustments:
Verifying if the warning light resets after adjustments is necessary to confirm problem resolution. Often, after correcting tire pressure, the light should turn off automatically. If it doesn’t, it may indicate a persistent issue within the tire monitoring system or further at-home inspections may be needed.
4. Monitor the Tire Pressure Regularly:
Monitoring tire pressure regularly ensures safety and efficiency. The ideal frequency is at least once a month and before long trips. Keeping your tires at the recommended pressure can enhance vehicle performance, decrease wear and tear, and improve gas mileage.
5. Consult a Professional Mechanic if the Light Persists:
Consulting a professional mechanic if the light persists is crucial. A mechanic can conduct a thorough diagnosis of the tire pressure monitoring system. This system may include sensors that sometimes malfunction due to electronic issues or flat battery testing. Ignoring persistent lights can lead to more serious problems.
6. Consider Potential Issues with the Tire Pressure Monitoring System:
Considering potential issues with the tire pressure monitoring system (TPMS) is essential if warning lights remain on. TPMS may fail due to sensor problems or software issues. Understanding how your specific vehicle’s TPMS works can clarify the issue and guide actions needed if warning lights remain illuminated. According to the American Automobile Association (AAA), TPMS problems can account for up to 20% of all vehicle tire issues.