The spare tire in the 2019 Ram 1500 is located underneath the truck bed. To access it, remove the tool kit found under the front passenger seat. This kit includes the tools needed to lower the spare tire from its mounting position, allowing for easy retrieval when necessary.
Begin by locating the jack and lug wrench, usually stored in the cab or under the rear seat. Next, park the truck on a flat surface for safety. Use the lug wrench to loosen the lug nuts on the flat tire but do not remove them completely yet. After that, position the jack beneath the vehicle and raise it until the tire is off the ground. Now you can fully remove the lug nuts and take off the flat tire.
Once the flat tire is removed, use the tire hoist tool to lower the spare tire from its location. Attach the spare tire and tighten the lug nuts in a star pattern to ensure even pressure. This guide provides essential steps for changing a tire, setting the stage for further information on tire maintenance and safety tips.
Where is the Spare Tire Located in the 2019 Ram 1500?
The spare tire in the 2019 Ram 1500 is located underneath the bed of the truck. You will find it mounted to a frame under the rear of the vehicle. To access the spare tire, use the provided tools located in the cab, usually stored behind the rear seat or in a side compartment.
How Can You Access the Spare Tire in the 2019 Ram 1500?
To access the spare tire in the 2019 Ram 1500, you need to use the provided tools to lower it from under the vehicle.
- Locate the spare tire under your truck. The spare tire is typically positioned beneath the cargo bed at the rear of the vehicle.
- Gather the necessary tools. You will need the jack handle and the spare tire lowering tool, which are usually stored inside the cab or under the rear seat.
- Insert the lowering tool into the access hole. This hole can be found on the rear underside of the truck, just behind the rear bumper.
- Rotate the lowering tool. Turn the tool counterclockwise to release the spare tire from its holder. This action lowers the spare tire to ground level.
- Remove the tire from the saddle. Once the tire is lowered fully, you can pull it out carefully. Ensure you take it out without any obstruction.
- Secure the lowered tire. Once you have accessed the tire, make sure to avoid any accidental releases, especially if you plan to replace it or use it for a flat.
These steps should effectively allow you to access the spare tire when needed. Always refer to the owner’s manual for specific instructions tailored to your vehicle model.
What Tools Do You Need to Remove the Spare Tire from a 2019 Ram 1500?
To remove the spare tire from a 2019 Ram 1500, you need a few essential tools.
- Socket wrench (size 21 mm)
- Spare tire tool kit (including jack and handle)
- Caution triangle or reflective vest (for safety)
These tools are commonly required and should be available in most vehicles. However, some owners may prefer to use alternative tools or methods based on personal experience or preference.
1. Socket Wrench (Size 21 mm)
The socket wrench, specifically in size 21 mm, is crucial for loosening and removing the spare tire bolts. This wrench fits the lug nuts on the spare tire securely. A standard roadside tool kit often includes a variety of socket sizes to accommodate different vehicles. Using the correct size is essential to avoid stripping the nuts.
2. Spare Tire Tool Kit
The spare tire tool kit typically comes with the vehicle. It includes a jack and a handle to lift the vehicle for tire replacement. This kit is designed for easy setup and usage. Parking the vehicle on a flat surface is important for safety when using a jack.
3. Caution Triangle or Reflective Vest
Having a caution triangle or reflective vest is essential for safety. This equipment alerts other drivers of your presence while changing the tire. Visibility reduces the risk of accidents on busy roads.
Using a combination of these tools ensures a thorough and safe tire removal process. Having the right equipment enhances efficiency and safety during these situations. Furthermore, some owners might consider carrying additional tools or equipment for personal convenience or preparedness in case of a roadside emergency.
What Are the Step-by-Step Instructions to Remove the Spare Tire from a 2019 Ram 1500?
To remove the spare tire from a 2019 Ram 1500, follow these step-by-step instructions:
- Gather tools: tire iron, jack, and the spare tire tools.
- Locate the spare tire: find it underneath the bed of the truck.
- Loosen the spare tire winch: use the tire iron to unlock the winch mechanism.
- Lower the spare tire: turn the winch tool counterclockwise to lower the tire.
- Remove the spare tire: once lowered, detach the tire from the winch.
- Store the spare tire: place it in the designated area in your vehicle.
These steps are essential for safely accessing and removing the spare tire. It is important to note that opinions may vary on the necessity of having certain tools on hand for tire changes. Some drivers advocate for having a full-size spare tire instead of a compact one, as it may provide better performance and safety during a flat tire situation.
1. Gather Tools:
First, gather the essential tools including a tire iron, jack, and spare tire tools. A tire iron is used for loosening and tightening lug nuts. A jack lifts the vehicle, while the spare tire tools help in operating the spare tire winch.
2. Locate the Spare Tire:
Next, locate the spare tire. The spare tire is typically stored beneath the cargo bed of the truck. This location allows for maximum bed space while also keeping the spare secure during transport.
3. Loosen the Spare Tire Winch:
Loosening the spare tire winch involves using the tire iron to unlock the winch mechanism. The winch keeps the tire securely in place, so unlocking it is a crucial step before lowering the tire.
4. Lower the Spare Tire:
Lowering the spare tire requires turning the winch tool counterclockwise. This action gradually releases the tire from its storage position. Ensure you turn slowly to allow the spare tire to descend safely.
5. Remove the Spare Tire:
To remove the spare tire, detach it from the winch once it is fully lowered. This may require some maneuvering, especially if the tire is heavy.
6. Store the Spare Tire:
Finally, store the spare tire in the designated area in your vehicle after removing it. Make sure it is secure and does not slide around. Proper storage is vital for maintaining the spare tire’s condition.
By understanding each of these steps, a Ram 1500 owner can confidently change a tire while ensuring their safety and the vehicle’s functionality.
How Can You Properly Install the Spare Tire on a 2019 Ram 1500?
To properly install the spare tire on a 2019 Ram 1500, follow these steps: remove the damaged tire, prepare the spare tire, install it, and secure all components.
-
Remove the damaged tire:
– Locate the jack and spare tire tools in your vehicle. These are generally found beneath the rear seat or in the trunk area.
– Use the jack to lift the vehicle. Position the jack under the designated lift point, which is typically on the frame near the rear axle.
– Loosen the lug nuts on the flat tire using the tire iron before lifting the vehicle. This will make it easier to remove them once the vehicle is raised.
– Once elevated, remove the lug nuts completely and take off the damaged tire. -
Prepare the spare tire:
– Ensure that the spare tire is in good condition. Check that it is adequately inflated; the recommended pressure is usually found on a sticker on the driver’s side door jamb.
– Align the spare tire with the wheel hub, ensuring the holes on the tire match up with the wheel studs on the vehicle. -
Install the spare tire:
– Place the spare tire onto the wheel hub, aligning the holes with the studs.
– Hand-tighten the lug nuts onto the wheel studs to hold the spare tire in place. Do not fully tighten them yet. -
Secure all components:
– Lower the vehicle back to the ground using the jack.
– Once on the ground, tighten the lug nuts in a star pattern. This ensures even pressure and secure fitment. Use the tire iron to achieve the recommended tightness.
– Store the flat tire and all tools back in their designated spots in your vehicle.
Following these steps will ensure that your spare tire is securely and properly installed on your 2019 Ram 1500, allowing you to safely continue your journey.
What Maintenance Tips Should You Follow for Your 2019 Ram 1500 Spare Tire?
To maintain your 2019 Ram 1500 spare tire effectively, you should check its condition regularly, ensure proper inflation, and store it correctly.
- Inspect the spare tire for damage
- Check the tire pressure regularly
- Store the spare tire properly
- Ensure the tools for removal are in good condition
- Rotate the spare tire if used for an extended period
Maintaining your spare tire ensures its reliability when you need it.
1. Inspect the Spare Tire for Damage:
Inspecting the spare tire for damage involves visually examining it for any cuts, cracks, or bulges. This ensures that the tire is safe for use in an emergency. According to the Tire and Rubber Association (2022), even minor damages can compromise the tire’s performance.
2. Check the Tire Pressure Regularly:
Checking tire pressure regularly helps maintain the spare tire’s integrity. The recommended psi (pounds per square inch) for the 2019 Ram 1500 spare tire is typically between 60 to 70 psi. The National Highway Traffic Safety Administration (NHTSA) states that maintaining the correct tire pressure improves handling and increases fuel efficiency.
3. Store the Spare Tire Properly:
Storing the spare tire properly prevents damage from environmental factors. Keep it in a cool, dry place, away from direct sunlight. The Rubber Manufacturers Association warns that prolonged exposure to UV rays can deteriorate rubber, making it less safe for use.
4. Ensure the Tools for Removal Are in Good Condition:
Ensuring the tools, such as the jack and lug wrench, are in good condition is essential for safe removal. Regularly check for any rust or wear. According to a 2021 study by Motor Trend, maintaining your roadside assistance tools can significantly reduce the chance of difficulty during a tire change.
5. Rotate the Spare Tire If Used for an Extended Period:
Rotating the spare tire when it is in use ensures even wear. This is a good practice if the spare tire is mounted for a longer duration. The Automotive Service Association recommends re-evaluating a spare tire if it has been in use for more than six months, as it may begin to show signs of wear or age.
How Do Weather Conditions Affect the Safety of Your Spare Tire in the 2019 Ram 1500?
Weather conditions significantly impact the safety and performance of your spare tire in the 2019 Ram 1500. Factors such as temperature extremes, humidity, and precipitation can all affect the tire’s condition and readiness for use.
Temperature extremes can lead to issues like air pressure changes and rubber degradation. High temperatures can cause tire pressure to increase, potentially leading to a blowout. A study by the National Highway Traffic Safety Administration (NHTSA) in 2018 found that tire pressure can rise by 1 psi for every 10°F increase in temperature. Conversely, cold weather can decrease tire pressure, making the spare tire harder and less effective for use.
Humidity affects tire storage conditions. In high humidity, tires may develop mold or mildew, especially if they are stored in a damp environment. This can weaken the rubber and compromise the tire’s integrity. The American Tire Dealers Association suggests checking tires regularly for signs of wear or damage, particularly in humid conditions.
Precipitation, such as rain or snow, impacts the rubber’s grip. Wet conditions can reduce traction, increasing the risk of accidents if the spare is used in inclement weather without prior inspection. A report from the Federal Highway Administration (FHWA) in 2019 indicated that wet roads contribute to nearly 75% of weather-related crashes. Thus, it is advisable to inspect your spare tire regularly, especially after significant rain or snowfall.
In summary, maintaining proper care and storage of your spare tire based on weather conditions can enhance its safety and performance in emergency situations. Frequent checks for air pressure, tread wear, and overall condition are crucial to ensure the spare tire is always ready for use.
What Are the Common Mistakes to Avoid When Handling the Spare Tire of a 2019 Ram 1500?
Common mistakes to avoid when handling the spare tire of a 2019 Ram 1500 include improper storage, neglecting tire pressure checks, and incorrect installation.
- Improper storage of the spare tire
- Neglecting tire pressure checks
- Failing to inspect the spare tire regularly
- Ignoring the weight rating limits
- Incorrect installation and use of tools
When handling the spare tire, it is crucial to ensure proper practices to maintain safety and vehicle performance.
-
Improper Storage of the Spare Tire: Improper storage of the spare tire can lead to damage and inefficiency. Storing the spare tire in an unsuitable environment can expose it to elements like moisture and extreme temperatures, which can degrade the rubber. The manufacturer recommends storing the spare in a cool, dry place, preferably in the vehicle’s designated compartment.
-
Neglecting Tire Pressure Checks: Neglecting tire pressure checks is a serious oversight. Underinflation can lead to poor performance and even failure during a roadside emergency. The recommended tire pressure for a 2019 Ram 1500 spare tire is typically around 60 PSI, depending on the type of spare. Regularly checking this pressure ensures it is ready for immediate use.
-
Failing to Inspect the Spare Tire Regularly: Failing to inspect the spare tire regularly can result in unforeseen problems during an emergency. Inspecting for cracks, bulges, or other signs of wear is essential for safety. Routine inspections, at least once a month or before long trips, can prevent accidents.
-
Ignoring the Weight Rating Limits: Ignoring the weight rating limits can lead to dangerous situations. Each spare tire has a specific load capacity, usually indicated on the tire itself. Exceeding this limit, especially while driving long distances, may result in tire failure. Vehicle owners should always adhere to these limits to ensure their safety.
-
Incorrect Installation and Use of Tools: Incorrect installation and use of tools can complicate or prolong tire changes. Using the right tools, such as the appropriate jack and lug wrench, is critical. The Ram 1500’s manual provides specific instructions for changing the tire. Following these instructions ensures the spare tire is installed correctly and securely.
By avoiding these common mistakes, drivers can ensure their spare tire remains functional and reliable whenever needed.
Related Post: