The spare tire for the Nissan Quest, models 2011-2017, is under the trunk carpet. To access it, open the fifth door and lift the carpet on the left side. Remove the hex head bolt by turning the retainer counter-clockwise. The jack is found under the carpet in the second-row seat area.
To remove the spare tire, gather the necessary tools. You will need a lug wrench, a jack, and the spare tire itself. First, loosen the lug nuts on the flat tire slightly while the vehicle is still on the ground. Next, position the jack under the rear jack point and lift the vehicle off the ground. Remove the lug nuts completely and take off the flat tire. Finally, place the spare tire onto the hub, tighten the lug nuts by hand, lower the vehicle, and then fully tighten the nuts.
Ensuring you know how to locate and remove the spare tire on your Nissan Quest can save you from hassle during a roadside emergency. Next, we will explore how to maintain the spare tire and keep it in good condition, ensuring it is ready when you need it most.
Where is the Spare Tire Located on a Nissan Quest?
The spare tire on a Nissan Quest is located underneath the vehicle. To access it, you need to look at the rear of the vehicle, typically under the cargo area. The spare tire is secured with a hoisting mechanism, which requires a simple tool for removal. This tool is usually included in the vehicle’s tool kit, located in the same storage area. Understanding its location and how to remove it can streamline the process of changing a flat tire.
How Can You Access the Spare Tire on a Nissan Quest?
You can access the spare tire on a Nissan Quest by following a specific process that involves locating the spare tire compartment, removing obstacles, and using tools like a tire iron and jack.
To access the spare tire, follow these detailed steps:
-
Locate the Spare Tire Compartment: The spare tire is typically located under the rear of the vehicle. Look for a small access panel on the floor of the cargo area.
-
Remove the Cover: If your model has a cover over the spare tire, you need to pull it up. Gently lift the covering to avoid damaging it. Some models may have a latch that needs to be released.
-
Remove Obstacles: Clear any items from the cargo area that may block access to the spare tire. This includes cargo, floor mats, or anything else that might impede movement.
-
Use Tools: Gather the necessary tools. You will need a tire iron to remove the lug nuts and a jack to lift the vehicle. These tools are often located in the same compartment as the spare tire.
-
Lower the Spare Tire: Use the provided tool to lower the spare tire from its mounting position. Typically, this involves turning a crank or handle that disengages the tire from its holder, allowing it to drop down.
-
Remove the Spare Tire: Once lowered, you can lift the spare tire from its location. Make sure to handle it carefully to avoid injury.
-
Replace the Flat Tire: If you are changing a flat, use the jack to lift the vehicle before removing the flat tire and replacing it with the spare tire. Follow the reverse steps to secure the spare in place.
By following these guidelines, you can efficiently access and utilize the spare tire on a Nissan Quest, ensuring you are prepared for roadside emergencies.
What Steps Should You Follow to Access the Spare Tire?
To access the spare tire on a Nissan Quest, locate the spare tire compartment, unscrew any fasteners, and use the proper tools to lower the tire.
- Locate the spare tire compartment.
- Unscrew any fasteners holding the spare tire.
- Use the proper tools to lower the tire.
- Remove the spare tire from the compartment.
Understanding how to access the spare tire can vary depending on the Nissan Quest model and year, as some vehicles have different designs or additional steps.
-
Locate the Spare Tire Compartment:
Locating the spare tire compartment is the first step to accessing the spare tire. In a Nissan Quest, the spare tire is typically located beneath the rear of the vehicle. The exact position may vary slightly based on the model year, so it is advisable to refer to the owner’s manual for specifics. Some older models may have the spare located inside the vehicle, under the rear floor mat. -
Unscrew Any Fasteners Holding the Spare Tire:
Unscrewing any fasteners is necessary to free the spare tire from its compartment. The spare tire in most Nissan Quest vehicles is secured with a retaining nut or a bracket. Use a wrench or socket that fits the fastener type to remove it. Failing to remove these fasteners before attempting to lower the tire can lead to damage or difficulty when accessing the spare tire. -
Use the Proper Tools to Lower the Tire:
Using the proper tools to lower the tire is vital for safe and effective access. Most Nissan Quest models come with a jack and a tire changing kit, usually located with the spare tire. Follow the manufacturer’s guidance on operating the jack safely to lower the tire to the ground. Incorrect utilization of the jack can cause injury or vehicle damage. -
Remove the Spare Tire from the Compartment:
Removing the spare tire from its compartment involves lifting it out carefully. Once the tire is lowered, ensure that no obstacles block its exit from the compartment. Handle the spare tire with care to avoid injury, and place it on a stable surface for easy access when needed.
By following these steps, you can efficiently access the spare tire in a Nissan Quest, ensuring you are prepared for any emergencies on the road.
What Tools Do You Need to Remove the Spare Tire from a Nissan Quest?
To remove the spare tire from a Nissan Quest, you need specific tools to ensure the process is safe and efficient.
- Tool Requirements:
– Lug wrench
– Jack
– Jack stands
– Wheel chocks
– Tire iron (if not included in the lug wrench)
To effectively remove the spare tire, understanding the function and importance of each tool is essential. Each tool contributes to a safe and organized tire removal process.
-
Lug Wrench:
The lug wrench is a tool designed to loosen and tighten the lug nuts that secure the wheel. It typically features a cross shape to provide leverage. The design allows for easier removal of tight lug nuts. Having a proper lug wrench is critical, as using an incorrect tool can result in damaged nuts or injury. -
Jack:
The jack elevates the vehicle, allowing you to access the spare tire. A hydraulic or scissor jack is common in vehicles like the Nissan Quest. For safety, always ensure the jack is on a stable part of the undercarriage. Improper jacking can lead to accidents with severe consequences, making it essential to use the right type. -
Jack Stands:
Jack stands provide additional support for the vehicle once raised. After using a jack to lift the vehicle, placing jack stands beneath it is crucial for safety. This prevents the vehicle from falling, especially if the jack fails. According to the National Safety Council, using jack stands reduces the risk of vehicle-related injuries significantly. -
Wheel Chocks:
Wheel chocks prevent the vehicle from rolling during the tire removal process. Place them behind the rear wheels when lifting the front or vice versa. This step provides extra safety and stability while you work on the vehicle. -
Tire Iron:
If your lug wrench does not have an integrated tire iron, you will need a separate tire iron for extra leverage. Having an appropriate tire iron ensures that you can effectively tighten the lug nuts when reattaching the spare tire.
These tools are essential for safely and effectively removing the spare tire from a Nissan Quest. Their proper use ensures that the task is completed without issues or accidents.
How Do You Safely Remove the Spare Tire from a Nissan Quest?
To safely remove the spare tire from a Nissan Quest, follow these steps: locate the spare tire, gather necessary tools, and carefully follow the removal procedure to avoid injury or damage.
-
Locate the spare tire: The spare tire is typically located underneath the rear of the Nissan Quest. It is secured in place by a holding mechanism, which you can see from the rear of the vehicle.
-
Gather necessary tools: You will need a jack, a lug wrench, and possibly a socket set for the specific type of holding mechanism. Ensure you have these tools before starting the removal process.
-
Prepare the vehicle: Park the Nissan Quest on a flat, stable surface. Make sure the vehicle is turned off and in park mode. Engage the parking brake to prevent any movement while you work.
-
Access the spare tire: Use the appropriate tool, often a crank handle or winch, to loosen the holding mechanism that secures the spare tire beneath the vehicle. Follow the vehicle’s manual for specific instructions about this step as the mechanism may vary by model year.
-
Remove the spare tire: After loosening the hold, carefully lower the tire to the ground. Ensure you support it with one hand while releasing the final holding mechanism with the other hand.
-
Store the tools: Once the spare tire is successfully removed, store your tools back in the vehicle. This practice ensures that everything is in the correct place for future use.
Taking these steps will enable you to safely and effectively remove the spare tire from your Nissan Quest. Always refer to your owner’s manual for specific instructions related to your vehicle’s model.
How Do You Install the Spare Tire on a Nissan Quest After Removal?
To install the spare tire on a Nissan Quest after removal, follow these key steps: align the tire with the wheel hub, secure it with lug nuts, and lower the vehicle.
-
Align the spare tire with the wheel hub. Position the tire so that the holes in the rim match the bolts on the hub. This alignment is crucial to ensure a proper fit.
-
Secure the spare tire with lug nuts. Hand-tighten each lug nut onto the bolts, then use a lug wrench to tighten them in a crisscross pattern. This pattern ensures even pressure on the wheel, which is essential for stability and safe operation. Typically, the recommended torque for lug nuts is between 83-115 lb-ft, but always refer to your owner’s manual for specific specifications.
-
Lower the vehicle. Once the spare tire is securely attached, carefully lower the vehicle back to the ground. Ensure that you remove any tools and check that all lug nuts are tightened properly before driving.
By following these steps, you can effectively install the spare tire on your Nissan Quest, ensuring your vehicle is safe and roadworthy.
What Should You Do If You Can’t Find the Spare Tire on Your Nissan Quest?
If you can’t find the spare tire on your Nissan Quest, check your vehicle’s manual, inspect designated storage areas, or contact a dealership for assistance.
- Check the Vehicle Manual
- Inspect Common Storage Locations
- Contact a Nissan Dealership
- Look for Manufacturer-Specific Features
Checking the vehicle manual provides instructions on location and removal. Inspecting common storage locations includes beneath the cargo area or under the rear of the vehicle. Contacting a Nissan dealership offers professional guidance on locating the spare. Finally, some Nissan models may have manufacturer-specific features that differ from standard designs, potentially affecting spare tire storage.
1. Check the Vehicle Manual:
Checking the vehicle manual is essential for locating the spare tire on a Nissan Quest. The manual provides diagrams and specific steps for different models. It usually outlines where the spare tire is kept, which can vary by year. According to a Nissan Quest owner’s manual from 2020, the spare tire is most commonly located beneath the cargo floor. This location allows for easy access while maintaining a clean interior.
2. Inspect Common Storage Locations:
Inspecting common storage locations is crucial if you cannot find the spare tire. In many Nissan Quest vehicles, the spare tire is stored in specific areas, such as under the rear cargo floor or mounted on the wall of the cargo area. Additionally, some models may house it under the vehicle, accessible via a latch mechanism. A 2019 survey by Nissan enthusiasts indicated that nearly 70% of users found their spare tire in the designated areas mentioned.
3. Contact a Nissan Dealership:
Contacting a Nissan dealership can provide immediate and accurate assistance. Dealership staff have experience with various Quest models and can offer insights on spare tire locations. They might also inform you about any unique features related to your vehicle’s model year. For example, in a study published by Automotive News in 2021, representatives from multiple dealerships noted that customers often overlook manufacturer-specific modifications in newer models.
4. Look for Manufacturer-Specific Features:
Looking for manufacturer-specific features is important as different Nissan models may have varying locations for the spare tire. These variations can be due to design changes, such as a shift in cargo layouts or safety modifications. In a report by Consumer Reports (2022), it was highlighted that some newer models of Nissan vehicles no longer include full-size spare tires, opting instead for a tire repair kit. This illustrates the need for thorough checks to adapt to changing designs over model years.
Why is Knowing the Location of the Spare Tire on a Nissan Quest Important?
Knowing the location of the spare tire on a Nissan Quest is important for quick access during emergencies, such as flat tires. The spare tire is typically located under the vehicle, specifically at the rear, in a compartment that protects it from the elements.
According to the National Highway Traffic Safety Administration (NHTSA), being able to locate and access a spare tire promptly can enhance vehicle safety, especially during roadside emergencies.
The underlying reasons for knowing the spare tire location involve practical vehicle maintenance and safety. If a driver gets a flat tire, having quick access to a spare tire allows for a quicker resolution. This reduces the time spent on the side of the road, which can be dangerous. Additionally, understanding where the spare tire is can prevent damage to the vehicle or the tire itself during retrieval.
The term “spare tire” refers to an additional tire stored in a vehicle for use when one of the main tires goes flat or is damaged. Understanding this term is crucial for vehicle owners because it relates directly to vehicle safety and preparedness.
The mechanism for retrieving a spare tire usually involves lowering a spare tire carrier, which is a cable system that holds the tire in place. One needs to have the correct tools, such as a wrench and jack, to successfully remove and replace a flat tire with the spare. This process includes ensuring the vehicle is on stable ground and using the jack to lift the vehicle safely before removal of the damaged tire.
Specific conditions that contribute to needing a spare tire include driving on rough terrain, poor weather conditions, or simply having an old tire that may be at risk of failure. For example, if a driver frequently travels on unpaved roads or in areas with debris, they may be more likely to experience a flat tire. Being prepared with knowledge of where to find the spare tire is an essential step in vehicle safety and maintenance.
What Common Issues Might You Encounter When Changing the Spare Tire?
Common issues encountered when changing a spare tire include the following:
- Jack failure
- Lug nut issues
- Improper placement of the spare tire
- Safety concerns during the change
- Tread or size mismatch with the original tire
These points highlight the different challenges one may face in the process of changing a spare tire. It is important to understand these common issues to ensure a smooth and safe tire change.
1. Jack Failure:
Jack failure refers to the breakdown or improper functioning of the jack used to lift the vehicle. This issue can lead to serious accidents while changing a tire. Jacks can fail due to a lack of maintenance, damage, or incorrect usage. According to the National Highway Traffic Safety Administration (NHTSA), improper use of jacks contributes to 20% of tire-changing accidents. It is crucial to choose a quality jack and ensure that it is in good condition before use.
2. Lug Nut Issues:
Lug nut issues involve problems with the nuts that secure the wheel to the vehicle. These issues may include lug nuts being stuck, stripped, or over-tightened. A study by the Tire Industry Association found that 68% of roadside tire changes involve difficulty in removing lug nuts. Using a proper wrench and ensuring that lug nuts are not overtightened during the last tire change can prevent this problem.
3. Improper Placement of the Spare Tire:
Improper placement refers to the incorrect installation of the spare tire onto the vehicle. This can lead to alignment issues and poor handling. According to MotorTrend, failure to align tires correctly can affect vehicle safety and lead to further damage. Car manufacturers often provide specific guidelines for tire installation that should be followed closely.
4. Safety Concerns During the Change:
Safety concerns involve potential hazards that can arise during a tire change. These may include being in a dangerous location, such as a busy roadway, or failing to secure the vehicle properly. The AAA reports that 3,000 roadside fatalities occur each year due to unsafe tire changes. Using hazard lights, working on flat ground, and wearing reflective clothing are crucial safety measures to follow.
5. Tread or Size Mismatch with the Original Tire:
Tread or size mismatch issues occur when the spare tire does not match the specifications of the original tire. This can affect the vehicle’s handling and performance. According to Bridgestone, using a spare tire with mismatched size can lead to increased wear on other tires and potential accidents. Always consult the vehicle manual to ensure the spare tire is compatible with the vehicle’s requirements.