Tread separation happens for several reasons. Key causes include over-inflated or under-inflated tires, vehicle overloading, and inadequate tire maintenance. These factors lead to excessive wear, causing the tread to detach from the tire. Proper tire care is essential for safety and extends the lifespan of your tires.
To prevent tire tread separation, regular maintenance is essential. Drivers should inspect their tires for signs of wear and perform routine pressure checks. Replacing tires before they become too worn can also mitigate risks.
Safety risks associated with tire tread separation are significant. A sudden loss of tread can lead to loss of control, causing accidents. It is crucial for drivers to recognize the importance of proper tire care.
In conclusion, understanding tire tread separation equips drivers with the knowledge to avoid dangers. Awareness and proactive measures can enhance safety on the road. Next, we will explore the signs of tire tread separation and what to do if you suspect it has occurred.
What is Tire Tread Separation and Why is it Important to Understand?
Tire tread separation is the peeling away of the tire’s outer layer, separating it from the inner structure. This issue can compromise vehicle safety and performance. Understanding tire tread separation is crucial for safe driving and vehicle maintenance.
According to the National Highway Traffic Safety Administration (NHTSA), tire separation leads to a significant number of crashes and incidents on the road. The NHTSA emphasizes the importance of regular tire inspections to prevent such occurrences.
Tire tread separation occurs due to various factors, including excessive wear, manufacturing defects, and overheating. Poor alignment and improper inflation can also increase the risk of tread separation. These conditions weaken the tire’s structural integrity.
The Tire Industry Association defines tread separation as a dangerous condition, particularly when it occurs at high speeds. Manufacturers advocate for tire maintenance and education on the signs of wear to mitigate risks.
Common causes include under-inflation, overloading the vehicle, and exposure to extreme temperatures. These factors can accelerate the deterioration of tires, leading to tread separation.
According to a report by the NHTSA, tread separation is implicated in approximately 33,000 crashes annually. This statistic also highlights the importance of vigilant tire care.
Tire tread separation poses serious safety risks, including loss of vehicle control and potential accidents. These incidents can lead to injuries and fatalities, significantly impacting public safety.
The broader implications include increased healthcare costs, vehicle damage expenses, and losses in productivity for businesses. Communities may also face heightened insurance premiums.
Examples of accidents caused by tread separation demonstrate severe injuries resulting from loss of control. Notably, high-profile cases emphasize the need for awareness regarding tire maintenance.
To address these issues, the Rubber Manufacturers Association recommends regular tire maintenance, proper inflation, and professional inspections. Education efforts on tire care can help prevent tread separation.
Specific strategies include using tire pressure monitoring systems and adhering to load limits. Additionally, adopting new tire technologies, such as temperature sensors, can help detect potential issues before they escalate.
What Causes Tire Tread Separation?
Tire tread separation occurs when the outer layer of a tire detaches from its inner structure. This issue can lead to loss of vehicle control and increased accident risk.
- Manufacturing defects
- Improper tire maintenance
- Overheating of tires
- Environmental factors
- Driving habits and conditions
Understanding these causes is essential for preventing tire tread separation and ensuring road safety.
-
Manufacturing Defects:
Manufacturing defects in tires can lead to tread separation. These defects may include flaws in the rubber compound or improper adhesion between layers. According to a study by the National Highway Traffic Safety Administration (NHTSA) in 2018, tire manufacturing defects account for approximately 30% of tread separations. For instance, the Ford Motor Company faced lawsuits due to defective tires on their Explorer vehicles, underscoring the significance of thorough quality control in tire production. -
Improper Tire Maintenance:
Improper tire maintenance contributes significantly to tread separation. Neglecting regular inspections, overlooking tire rotation, and failing to maintain correct air pressure can weaken the tire structure. The Rubber Manufacturers Association states that under-inflated tires are at a higher risk of overheating, which can lead to tread separation. Regular checks and maintenance extend the lifespan of tires and maintain safety. -
Overheating of Tires:
Overheating of tires leads to tread separation. Excessive heat can arise from prolonged high-speed driving, heavy loads, or under-inflation. According to a 2020 study by the University of Michigan, tires exceed safe temperature limits 50% more frequently when vehicles are heavily loaded. High temperatures can prompt the breakdown of rubber and adhesives that bond the tire layers. Drivers should remain aware of the load capacity of their vehicles to prevent overheating. -
Environmental Factors:
Environmental factors can cause tire tread separation. Extreme temperatures, whether hot or cold, can affect tire composition and performance. A study by the Tire and Rubber Association indicates that prolonged exposure to ultraviolet (UV) rays can degrade tire rubber, making it prone to separation. Additionally, driving on rough or uneven surfaces can also exacerbate wear and tear on tires. -
Driving Habits and Conditions:
Driving habits and conditions play a crucial role in the likelihood of tire tread separation. Aggressive driving behaviors, such as sharp turns or rapid acceleration and deceleration, increase stress on tires. According to the Insurance Institute for Highway Safety, approximately 50% of tire failures can be linked to poor driving practices. Additionally, driving on poorly maintained roads can further contribute to tire damage and increase the risk of tread separation.
By understanding these causes, vehicle owners can take proactive measures to maintain their tires and reduce the risk of tire tread separation. Regular inspections, proper maintenance, and mindful driving behaviors are key strategies for ensuring tire integrity and safety.
How Does Tire Ageing Contribute to Tread Separation?
Tire ageing contributes to tread separation through a series of interconnected factors. First, tires experience natural degradation over time. This degradation affects the rubber and materials used in the tire. As these materials break down, they lose flexibility and strength. Next, heat and environmental exposure accelerate this decay. Prolonged exposure to sunlight and high temperatures can cause the rubber to harden and crack.
When the rubber hardens, it creates weak points in the tire structure. These weak points increase the likelihood of tread separation. Tread separation occurs when the tire’s outer layer detaches from its inner structure. Additionally, the older the tire, the lower its performance capabilities. Reduced handling and traction can lead to uneven wear. Uneven wear may further increase the risk of tread separation.
Lastly, regular inspections and proper maintenance can mitigate some risks of tread separation, but ageing remains a critical factor. Thus, tire ageing is a significant contributor to tread separation through material degradation, environmental effects, and loss of performance.
In What Ways Do Manufacturing Defects Affect Tire Integrity?
Manufacturing defects affect tire integrity in several critical ways. First, defects can lead to material flaws. These flaws can result in weak spots in the tire structure. Weak spots increase the risk of tire failure during use. Second, improper curing can cause inconsistent rubber hardness. This inconsistency compromises traction and stability. Third, misalignment of tire layers can lead to uneven wear. Uneven wear further reduces tire lifespan and performance. Fourth, inadequate quality control might allow compromised tires to reach consumers. Compromised tires could fail unexpectedly, posing safety risks. Each of these issues highlights the importance of quality manufacturing processes. Thus, addressing manufacturing defects directly enhances tire safety and performance.
How Do External Factors Like Road Conditions Lead to Tread Separation?
External factors like road conditions can significantly lead to tread separation in tires due to increased stress and wear. The key points of how these external factors contribute to tread separation include improper road surfaces, temperature fluctuations, and debris presence.
Improper road surfaces: Uneven or damaged roads can cause tires to experience excessive stress. For instance, potholes create sudden impacts that can lead to tread detachment. According to the National Highway Traffic Safety Administration (NHTSA, 2020), millions of dollars are spent annually on road repairs to mitigate these issues.
Temperature fluctuations: Extreme heat or cold can soften or harden tire materials, respectively. This alteration in the tire’s structure can increase the likelihood of tread separation. A study in the Journal of Materials Science (Chen et al., 2018) noted that higher temperatures can accelerate rubber degradation, causing tires to become more susceptible to separation.
Presence of debris: Objects like nails, glass, or large rocks on the road can puncture tires or lead to localized stress points. If a tire makes contact with sharp debris, it can result in damage that promotes tread separation. Research by the Rubber Manufacturers Association (RMA, 2019) found that road debris contributes to a significant percentage of tire failures.
These factors combine to create an environment where tires are at greater risk of wear and eventual tread separation. Proper maintenance and awareness of road conditions can help mitigate these risks.
What Maintenance Practices Are Essential to Prevent Tread Separation?
To prevent tread separation, essential maintenance practices include regular inspections, proper tire inflation, and alignment checks.
- Regular inspections of tires
- Maintaining proper tire inflation
- Checking wheel alignment and suspension
- Rotating tires regularly
- Monitoring tread depth
- Avoiding overloading vehicles
- Choosing high-quality tires
Effective tire maintenance enhances safety. Different factors influence these practices, including tire quality, driving conditions, and seasonal changes. Variations in tire brands and types also lead to differing maintenance needs.
-
Regular Inspections of Tires: Regular inspections of tires help identify early signs of wear, damage, or separation. The National Highway Traffic Safety Administration (NHTSA) recommends inspecting tires at least once a month. Inspections should focus on the surface for cracks or blisters and the sidewalls for bulges. Consistent examination can reveal issues before they escalate into dangerous tread separation.
-
Maintaining Proper Tire Inflation: Maintaining proper tire inflation is crucial for tire longevity. Tires that are underinflated can overheat and lead to separation. According to the Tire Industry Association, about 50% of vehicles are driven with at least one underinflated tire. Regularly checking tire pressure, at least every other week, can mitigate this risk. Using a reliable gauge ensures correct measurements are taken.
-
Checking Wheel Alignment and Suspension: Checking wheel alignment and suspension periodically ensures that tires wear evenly. Misaligned wheels can cause uneven tread wear and increase the likelihood of tread separation. The Rubber Manufacturer’s Association suggests aligning wheels every 6,000 miles or whenever tires are replaced. Correct alignment enhances vehicle handling and fuel efficiency.
-
Rotating Tires Regularly: Rotating tires regularly distributes wear evenly among all tires. The American Automobile Association (AAA) recommends rotating tires every 5,000 to 8,000 miles. This practice extends the life of tires and prevents one tire from bearing too much load, which could lead to tread separation.
-
Monitoring Tread Depth: Monitoring tread depth ensures that tires have adequate grip on the road. Tires should have at least 2/32 of an inch of tread depth to be considered safe. The AAA advises drivers to use the penny test to check tread depth. If a penny inserted into the tread shows Lincoln’s entire head, the tread is too worn. Worn tires are more susceptible to separation.
-
Avoiding Overloading Vehicles: Avoiding overloading vehicles is crucial in preventing premature tire failure. Each tire has a specific load rating, and exceeding it can contribute to excessive heat buildup. The NHTSA advises consulting the vehicle’s manual for load limits. Keeping the vehicle within these limits promotes longer tire health.
-
Choosing High-Quality Tires: Choosing high-quality tires enhances reliability and safety. Not all tires are created equal, and investment in reputable brands can reduce the risk of tread separation. Poor quality tires often have inadequate materials or manufacturing processes. The NHTSA states that premium tires typically undergo more rigorous testing and quality control.
Through these comprehensive maintenance practices, vehicle owners can significantly reduce the risk of tread separation and enhance their overall safety on the road.
How Can You Identify Signs of Tire Tread Separation Early?
You can identify signs of tire tread separation early by regularly inspecting your tires for bulges, vibrations, unusual wear patterns, and audible noise. These signs indicate potential tread separation, which can lead to tire failure.
-
Bulges: Look for any raised areas or bulges on the tire surface. These bulges can indicate internal tire damage. According to the National Highway Traffic Safety Administration (NHTSA), bulging tires can be highly susceptible to blowouts. Inspecting your tires monthly can help you catch these issues early.
-
Vibrations: Pay attention to any unusual vibrations while driving. Vibrations may signal uneven tread wear or separation within the tire structure. Research by the Tire and Rim Association (2021) shows that irregular vibrations often correlate with tire damage and can compromise vehicle stability.
-
Unusual wear patterns: Check the tread for signs of uneven wear. This can be caused by misalignment, improper inflation, or tire separation. The Tire Industry Association recommends examining your tread depth regularly. Using a tread depth gauge can ensure your tires are within safe limits.
-
Audible noise: Listen for unusual noises while driving. Sounds such as thumping or flapping may indicate that the tread is separating from the tire. A study by the Institute of Mechanical Engineers (2020) found that noise levels can increase significantly with tire defects, providing an early warning of potential failure.
Regularly monitoring these indicators will help maintain your vehicle’s safety and performance. Being proactive can prevent costly accidents and ensure a safer driving experience.
What Symptoms Indicate That Tire Tread Separation May Be Occurring?
Symptoms indicating that tire tread separation may be occurring include noticeable irregularities in tire performance and visual signs of damage.
- Vibration or Shaking: Unusual vibrations while driving.
- Uneven Wear Patterns: Irregular wear across the tread surface.
- Cracking or Bulging: Visible cracks, bulges, or separations in the tread.
- Increased Noise: Higher noise levels from the tires while driving.
- Reduced Handling: Deterioration in handling and stability of the vehicle.
These symptoms can significantly affect safety and performance. Therefore, understanding the details of each symptom is crucial for drivers and vehicle owners.
-
Vibration or Shaking:
Vibration or shaking occurs when tread separation affects the tire’s balance and uniformity. This symptom indicates that parts of the tire are disconnecting or have weakened, causing an imbalance. The National Highway Traffic Safety Administration (NHTSA) highlights that prolonged vibration can lead to tire blowouts. It’s advisable to have the tires inspected immediately if these vibrations become noticeable. -
Uneven Wear Patterns:
Uneven wear patterns denote that the tire may not be making proper contact with the road due to tread separation. Tires that show wear on one side more than the other or have spots of significant wear may indicate internal damage. A study by the Tire Industry Association (TIA) shows that timely inspections can prevent dangerous accidents caused by worn tires. -
Cracking or Bulging:
Cracking or bulging refers to visible damage on the tire’s surface. This damage signals that the structural integrity of the tire is compromised. Cracks may form when rubber degrades, while bulging often indicates separation of the tread from the body of the tire. Tread separation can lead to catastrophic tire failure if not addressed. -
Increased Noise:
Increased noise while driving can reveal tire issues. Sounds such as thumping or loud growling may occur because of irregular tire surfaces due to separation. A 2019 survey by Consumer Reports indicated that noise is regularly linked to suspension or tire issues, emphasizing the need for early diagnosis to prevent further problems. -
Reduced Handling:
Reduced handling means that the vehicle does not respond appropriately during maneuvers. Tread separation can affect grip and traction, leading to longer stopping distances and difficulty in maintaining control. According to a report from the American Automobile Association (AAA), understanding how tires respond under different conditions can significantly enhance driving safety.
Being aware of these symptoms can help drivers maintain their tires effectively and ensure greater road safety. Regular inspections and maintenance are crucial to mitigate the risks associated with tire tread separation.
When Should You Consult a Professional Regarding Tire Issues?
You should consult a professional regarding tire issues when you notice any visible damage, such as cracks, bulges, or punctures. These signs indicate that your tire may be compromised. Additionally, if you experience unusual vibrations while driving, this may signal an imbalance or alignment issue, which requires expert assessment. Check tire pressure regularly. Low or high pressure can lead to poor handling or blowouts. If your tire tread appears worn down, it’s time to seek assistance. Adequate tread is essential for traction and safety. Lastly, if you are uncertain about the tire’s condition or experience sudden problems like loss of air or handling issues, contact a professional. Acting timely on these concerns can prevent further damage and ensure your safety on the road.
What Are the Safety Risks Associated with Tire Tread Separation?
Tire tread separation poses significant safety risks that can lead to accidents and fatalities. These risks primarily include loss of vehicle control, tire blowouts, decreased stopping ability, and increased risk of rollover accidents.
- Loss of Vehicle Control
- Tire Blowouts
- Decreased Stopping Ability
- Increased Risk of Rollover Accidents
The dangers associated with tire tread separation highlight various facets of vehicle safety and road conditions. Understanding these points can help in mitigating accidents and enhancing driver awareness.
-
Loss of Vehicle Control: Loss of vehicle control occurs when a tire’s tread separates from the tire body, leading to unpredictable handling. Sudden tread separation can cause the vehicle to veer unexpectedly. According to a study by the National Highway Traffic Safety Administration (NHTSA, 2020), loss of control contributes to over 70% of accidents linked to tire issues.
-
Tire Blowouts: Tire blowouts, resulting from tread separation, can occur unexpectedly while driving at high speeds. A blowout can cause the driver to lose control, potentially leading to collisions. Research from the American Automobile Association (AAA, 2019) suggests that faulty tires cause approximately 11,000 injuries annually, many attributed to blowouts.
-
Decreased Stopping Ability: Decreased stopping ability arises when tire tread is compromised. Worn tread affects traction on wet or slippery surfaces. The Tire Rack emphasizes that tires with insufficient tread depth increase stopping distances, nearly doubling the time and distance required to halt a vehicle on wet roads.
-
Increased Risk of Rollover Accidents: Increased risk of rollover accidents results from a high center of gravity and sudden loss of tire stability. According to the Insurance Institute for Highway Safety (IIHS, 2021), tread separation significantly raises the likelihood of rollovers, particularly in SUVs and trucks. The combination of speed and an unstable tire can lead to deadly outcomes.
Awareness of these safety risks can help drivers make better decisions regarding tire maintenance and replacements, potentially saving lives. Regular inspections and proper tire care are crucial in preventing tire tread separation and its associated dangers.
How Can Tire Tread Separation Impact Vehicle Performance and Control?
Tire tread separation negatively impacts vehicle performance and control, leading to reduced handling, increased stopping distance, and potential loss of vehicle control.
Handling: When tire tread separates, it compromises the tire’s contact with the road. This can cause erratic steering responses and reduce stability, making it difficult to navigate turns. A study conducted by the National Highway Traffic Safety Administration (NHTSA) in 2020 found that defective tires, including those with tread separation, were implicated in over 30% of tire-related crashes.
Stopping distance: Tread separation can increase the distance required to stop a vehicle. The degradation in tire grip affects braking efficiency. The Tire Industry Association states that a vehicle can require as much as 30% more distance to stop when equipped with compromised tires.
Loss of control: A severe tread separation can result in a blowout, significantly increasing the likelihood of losing control of the vehicle. The driver may experience sudden veering or a loss of directional stability. According to a report by the Federal Motor Carrier Safety Administration (FMCSA) in 2019, around 10% of large truck accidents were caused by tire failure, including tread separation.
Given the roles of proper tire maintenance and inspection, addressing tread separation is crucial for ensuring safety and reliability on the road. Regular checks can prevent these serious issues, thus maintaining vehicle performance and control.
What Are the Legal and Financial Consequences of Tire-Related Accidents?
The legal and financial consequences of tire-related accidents can include liability claims, increased insurance premiums, and potential regulatory penalties.
Key points to consider regarding these consequences include:
1. Legal liability for accidents
2. Financial costs of damages and injuries
3. Insurance implications for drivers and manufacturers
4. Potential for lawsuits against manufacturers
5. Regulatory consequences for vehicle safety compliance
6. Economic impact on businesses related to tire sales and services
The various perspectives on tire-related accidents highlight the need for thorough understanding of both legalities and financial repercussions.
-
Legal Liability for Accidents:
Legal liability for accidents arises when a driver is considered responsible for an accident due to negligence. Negligence can occur if a driver fails to maintain their tires in safe condition or drives on defective tires. Courts often evaluate whether a driver acted carelessly, which can result in compensation claims by victims. According to the National Highway Traffic Safety Administration (NHTSA), defective tires contribute to thousands of accidents yearly, highlighting the potential legal outcomes. -
Financial Costs of Damages and Injuries:
The financial costs from tire-related accidents can include medical expenses, vehicle repairs, and lost wages for injured parties. According to a 2019 report from the Insurance Institute for Highway Safety (IIHS), the average cost of an accident results in about $3,000 in damages. Serious accidents can escalate into much higher expenses, including long-term medical care for severe injuries. -
Insurance Implications for Drivers and Manufacturers:
Drivers involved in tire-related accidents may face increased insurance premiums due to liability claims. Insurance policies commonly cover damages resulting from accidents. However, insurers may raise premiums or revoke coverage if the driver is deemed negligent. Manufacturers can also face higher insurance costs and reputational damage if their products are linked to accidents. -
Potential for Lawsuits Against Manufacturers:
Lawsuits can be filed against tire manufacturers when defective products lead to accidents. Plaintiffs may claim damages for injuries sustained due to design flaws or manufacturing defects. Past cases, such as the Firestone tire recall in the early 2000s, illustrate how manufacturers can be held accountable, leading to substantial financial losses and compensation payouts. -
Regulatory Consequences for Vehicle Safety Compliance:
Regulatory consequences may arise if a manufacturer fails to comply with safety standards related to tire performance. Government agencies like the NHTSA enforce regulations. If violations lead to accidents, manufacturers may incur fines and be compelled to execute recalls, adding to financial liabilities. -
Economic Impact on Businesses Related to Tire Sales and Services:
Tire-related accidents can adversely affect businesses in tire sales and repair services. A rise in accidents can lead to higher demand for repair services. Yet, companies may also face lawsuits and claims from dissatisfied customers, resulting in financial strain. A 2021 study indicates that service centers see a 20-30% increase in demand following a spike in highway accidents due to poor tire conditions.
These comprehensive points underscore the multifaceted legal and financial consequences associated with tire-related accidents, emphasizing the importance of proper tire maintenance and adherence to safety standards.
What Expert Advice Can Help You Deal with Tire Tread Separation?
To effectively deal with tire tread separation, it is crucial to seek expert advice that encompasses preventive measures, safety protocols, and immediate actions to take when it occurs.
Key points to consider include:
- Regular tire maintenance
- Tire quality checks
- Proper inflation
- Safe driving practices
- Replacement guidelines
- Expert consultation when issues arise
Understanding these points can help mitigate the risks associated with tire tread separation, ensuring a safer driving experience.
-
Regular Tire Maintenance: Regular tire maintenance involves periodic checks for wear and tear, alignment, and balancing. Experts recommend inspecting tires at least once a month. The National Highway Traffic Safety Administration (NHTSA) emphasizes the importance of rotating tires every 5,000 to 8,000 miles to ensure even wear.
-
Tire Quality Checks: Before purchasing tires, it is advisable to seek higher quality brands known for durability. According to Consumer Reports, brands that meet rigorous testing standards tend to provide better performance and resistance to issues such as tread separation.
-
Proper Inflation: Maintaining the correct tire pressure is crucial. Underinflation can lead to excessive heat buildup, while overinflation can cause uneven wear. The NHTSA recommends checking tire pressure monthly and adjusting it according to the vehicle’s specifications.
-
Safe Driving Practices: Speeding and sudden stops increase the risk of tire-related incidents. Experts suggest driving at moderate speeds and avoiding reckless maneuvers to prolong tire life and maintain safety. The National Safety Council notes that aggressive driving can also contribute to increased wear and potential separation.
-
Replacement Guidelines: Tires should be replaced when tread depth falls below 2/32 of an inch. The NHTSA advises using the penny test to check tread depth. Insert a penny into the tread; if the top of Lincoln’s head is visible, it’s time for a tire replacement.
-
Expert Consultation When Issues Arise: Consulting with a professional mechanic when you notice any abnormal tire performance is essential. According to Tire Industry Association, getting an expert opinion can help identify underlying issues, ensuring timely repairs or replacements.
Dealing with tire tread separation requires consistent attention and adherence to expert advice. By following these recommendations, drivers can significantly reduce risks and enhance their tire longevity.
When Should You Replace Your Tires to Prevent Tread Separation?
You should replace your tires to prevent tread separation when they show signs of wear and damage. Inspect your tires regularly for uneven tread wear, cracks, or bulges. Tread depth is crucial; if it measures less than 2/32 of an inch, replace the tires. Additionally, consider replacing them every six years, even if the tread appears adequate. Extreme weather conditions and driving habits can accelerate wear. Monitor your tires’ performance, especially during changes in handling or a decrease in traction. Addressing these signs promptly reduces the risk of accidents and enhances safety on the road.
How Can Professional Inspections Enhance Tire Longevity?
Professional inspections enhance tire longevity by identifying and addressing issues that can lead to premature wear or damage. Such inspections can provide valuable insights into tire condition, alignment, and inflation, thereby prolonging tire life and improving vehicle safety.
Regular inspections help in the following ways:
-
Identifying Damage: Inspections reveal cuts, cracks, or punctures. According to the National Highway Traffic Safety Administration (NHTSA, 2022), regularly checking for damage can prevent blowouts and extend tire longevity.
-
Assessing Tread Depth: Tire tread is crucial for traction. The NHTSA states that tires should have at least 2/32 of an inch of tread depth. Inspections help measure this depth. Adequate tread improves grip and reduces tire replacement frequency.
-
Monitoring Inflation Pressure: Proper tire inflation is essential. The NHTSA notes that underinflation can reduce tire lifespan by as much as 25 percent. Inspections ensure tires are inflated to the manufacturer’s recommended pressure, enhancing tire performance and durability.
-
Checking Alignment and Balancing: Misalignment can cause uneven tire wear. The Tire Industry Association (TIA, 2021) emphasizes that proper wheel alignment can reduce tire wear by up to 30 percent. Inspections can detect misalignment and balancing issues early.
-
Evaluating Age and Condition: Tires have a shelf life. The TIA advises replacing tires every six years, regardless of tread. Inspections can help track tire age and condition, prompting timely replacement to maintain vehicle safety.
By regularly conducting professional inspections, vehicle owners can address these factors, ensuring their tires last longer and perform safely.
Related Post: