The spare tire on a 2017 Mitsubishi Outlander is located in the rear cargo area. This temporary spare, called a donut, saves space compared to a full-sized tire. It is meant for short-distance driving only, helping you reach a repair stop safely.
Gather necessary tools for a quick tire replacement. You will need a jack, a lug wrench, and the spare tire itself. The jack is stored alongside the spare in the same compartment. Always engage the parking brake before beginning the replacement process for safety.
Once you have the spare tire and tools ready, start by loosening the lug nuts on the flat tire. Raise the vehicle using the jack until the tire is off the ground. Remove the lug nuts completely, then take off the flat tire. Finally, place the spare tire on the hub and secure it by tightening the lug nuts.
With your spare tire securely in place, you can now drive with peace of mind. Next, let’s discuss additional tips to maintain your spare tire and ensure its readiness for future use.
Where Is the Spare Tire Located on a 2017 Mitsubishi Outlander?
The spare tire on a 2017 Mitsubishi Outlander is located beneath the rear cargo area. To access the spare tire, first, lift the trunk floor cover. Then, remove the cargo tray or any storage compartments above the tire. Once you have access, you will find the spare tire secured by a tire hold-down mechanism. Use the provided tool kit, typically located in the same area, to release the hold-down and retrieve the spare tire.
How Do You Access the Spare Tire on a 2017 Mitsubishi Outlander?
To access the spare tire on a 2017 Mitsubishi Outlander, you need to open the rear hatch, locate the tire under the cargo floor, and use the appropriate tools to remove it.
-
Open the rear hatch: Use the latch located on the driver’s side of the vehicle to unlock and open the rear hatch to gain access to the cargo area.
-
Locate the cargo floor: In the rear compartment, you will find a flat cargo floor panel that covers the spare tire.
-
Remove the cargo floor panel: Lift the cargo floor panel by pulling it up to expose the spare tire compartment underneath. Some models may have clips or fasteners securing the panel.
-
Find the spare tire: The spare tire is typically positioned in a well or compartment beneath the cargo floor. It may be secured by a retaining bolt or strap.
-
Use the tools: Take the provided jack and tire iron, which are usually stored in the same area, to remove the spare tire. Use the tire iron to unscrew the retaining bolt if necessary.
-
Replace or install the spare tire: When the spare tire is accessible, you can either replace a flat tire or install it onto the vehicle.
Following these steps ensures you can quickly and effectively access the spare tire when needed. Properly maintaining the spare tire and tools is essential for preparedness in case of tire emergencies.
What Tools Are Required for Changing a Tire on a 2017 Mitsubishi Outlander?
To change a tire on a 2017 Mitsubishi Outlander, you will need several specific tools.
- Spare tire
- Jack
- Lug wrench
- Wheel chocks
- Tire pressure gauge
- Vehicle owner’s manual
Having the right tools is essential for efficiently changing a tire and ensuring safety during the process.
1. Spare Tire:
The spare tire is a replacement tire specifically made to fit your vehicle. It is essential for emergency use when a primary tire fails. The 2017 Mitsubishi Outlander may come with either a full-size spare or a compact temporary tire. It’s essential to know which type you have, as it determines how far you can drive and at what speed you should operate the vehicle with the spare.
2. Jack:
The jack is a tool used to lift the vehicle off the ground. The Outlander typically comes with a scissor or hydraulic jack. Always make sure that the jack is in good working condition before you need to use it. According to the National Association of Insurance Commissioners (NAIC), improper use of jacks can lead to accidents and injuries.
3. Lug Wrench:
A lug wrench is used to loosen and tighten the lug nuts that hold the tire in place. Most vehicles utilize a cross wrench or a standard lug wrench compatible with the lug nut size of the Outlander. The importance of this tool cannot be overstated; using the correct lug wrench can prevent rounding off nut edges and make the process more efficient.
4. Wheel Chocks:
Wheel chocks are blocks placed against the tires of the vehicle that remain on the ground to prevent it from rolling. This tool provides safety when jacking up the vehicle. The NAIC emphasizes that using wheel chocks is a critical step in ensuring the vehicle remains stationary during tire changes.
5. Tire Pressure Gauge:
A tire pressure gauge helps you check the air pressure in the spare tire before using it. Maintaining the correct tire pressure is important for optimal vehicle performance and safety. Under-inflated tires can lead to handling issues and increased fuel consumption.
6. Vehicle Owner’s Manual:
The vehicle owner’s manual is an informational guide specific to your vehicle model. It contains instructions for changing a tire and information about your spare tire’s specifications and limitations. Familiarizing yourself with the manual can help you ensure you follow the recommended procedures for a safe tire change.
In summary, having the right tools at your disposal ensures a smooth tire-changing process on your 2017 Mitsubishi Outlander.
How Do You Safely Remove the Flat Tire from a 2017 Mitsubishi Outlander?
To safely remove a flat tire from a 2017 Mitsubishi Outlander, follow these steps: gather necessary tools, secure the vehicle, loosen the lug nuts, lift the vehicle with a jack, remove the lug nuts and the flat tire, and finally install the spare tire.
-
Gather necessary tools: You will need a spare tire, a lug wrench, and a hydraulic jack. These tools are essential for safely changing the tire. Make sure the spare is properly inflated.
-
Secure the vehicle: Park the Outlander on a flat, stable surface. Engage the parking brake to prevent any movement. Turn on the hazard lights for safety.
-
Loosen the lug nuts: Use the lug wrench to turn the lug nuts counterclockwise. Loosening them while the tire is still on the ground provides better leverage. Do not remove them completely yet, just break the initial tightness.
-
Lift the vehicle with a jack: Place the jack under the vehicle’s jacking point, which is located near the flat tire. Raise the vehicle until the tire is above the ground. Ensure the jack is stable and secure before proceeding.
-
Remove the lug nuts and the flat tire: Once the vehicle is lifted, completely unscrew the loosened lug nuts and place them in a safe location. Pull the flat tire straight off the wheel hub and set it aside.
-
Install the spare tire: Align the spare tire with the wheel hub. Push it onto the hub until it is seated properly. Then, hand-tighten the lug nuts onto the spare tire’s bolts.
-
Lower the vehicle: Use the jack to bring the vehicle back to the ground. Ensure the spare tire is securely on the ground.
-
Tighten the lug nuts: With the vehicle back on the ground, use the lug wrench to tighten the lug nuts in a crisscross pattern. This method ensures even pressure and security.
Following these steps will help ensure a safe and effective tire change. Always consult your owner’s manual for specific instructions regarding your Mitsubishi Outlander.
What Are the Steps to Install the Spare Tire on a 2017 Mitsubishi Outlander?
To install the spare tire on a 2017 Mitsubishi Outlander, follow these steps: gather the necessary tools, remove the damaged tire, and securely attach the spare tire.
- Gather Necessary Tools
- Locate the Spare Tire
- Remove the Damaged Tire
- Install the Spare Tire
- Lower the Vehicle
Transitioning to detailed explanations, each step is crucial for a successful spare tire installation.
-
Gather Necessary Tools: Gathering necessary tools is the first step to ensure a smooth tire replacement process. You will need a spare tire, a jack, a lug wrench, and gloves for safety. Having these tools ready can streamline the installation process and avoid delays.
-
Locate the Spare Tire: Locating the spare tire involves finding its storage position. In the 2017 Mitsubishi Outlander, the spare tire is typically found in the trunk compartment under the floor mat. Knowing its exact location is essential for quick access when needed.
-
Remove the Damaged Tire: Removing the damaged tire requires a few preparation steps. First, ensure the car is on a flat surface and engage the parking brake. Use the lug wrench to loosen the lug nuts on the tire, then raise the vehicle using the jack. After the vehicle is elevated, completely remove the lug nuts and take off the damaged tire.
-
Install the Spare Tire: Installing the spare tire begins by positioning it onto the wheel hub. Align the holes in the spare tire with the wheel studs. After fitting the tire, hand-tighten the lug nuts onto the studs. Lower the vehicle back to the ground and then fully tighten the lug nuts in a star pattern for even pressure.
-
Lower the Vehicle: Lowering the vehicle to the ground is the final step in the tire installation process. After ensuring the spare tire is firmly positioned and lug nuts are tightened, gradually lower the jack until the car is stable on the ground.
Each of these steps must be followed carefully to ensure safety and proper functionality of the spare tire.
What Should You Check After Installing the Spare Tire on a 2017 Mitsubishi Outlander?
After installing the spare tire on a 2017 Mitsubishi Outlander, you should check the following aspects:
- Tire Pressure
- Lug Nut Tightness
- Wheel Alignment
- Brake Functionality
- Warning Lights on Dashboard
Now, let’s explore these checks in detail.
-
Tire Pressure: Checking the tire pressure ensures the spare tire is adequately inflated. The recommended pressure for the spare tire is typically found on a sticker inside the driver’s door. Under-inflation may lead to poor handling and reduced safety.
-
Lug Nut Tightness: Ensure that the lug nuts are tightened to the proper torque specifications. This secures the tire to the wheel hub. Loose lug nuts can lead to loss of the wheel, creating a safety hazard.
-
Wheel Alignment: After changing to a spare tire, monitor the vehicle’s alignment. Misalignment can affect handling and cause uneven tire wear. If there are changes in steering response, an alignment check is necessary.
-
Brake Functionality: Confirm that the brakes function correctly after the tire change. Check both the front and rear brakes for any unusual noises or diminished response. This is crucial for ensuring safe operation.
-
Warning Lights on Dashboard: Monitor the dashboard for any warning lights after installation. If a warning light related to tires or brakes appears, it may indicate a problem that needs attention.
In summary, these five checks help ensure that your 2017 Mitsubishi Outlander operates safely after installing a spare tire. Regular checks will help maintain vehicle performance and safety.
How Can You Maintain the Spare Tire for Optimal Performance on a 2017 Mitsubishi Outlander?
To maintain the spare tire for optimal performance on a 2017 Mitsubishi Outlander, regularly check tire pressure, inspect for damage, and ensure proper storage conditions.
Regularly checking tire pressure is crucial. A properly inflated spare tire can help prevent issues during an emergency. The recommended pressure for the spare tire is typically found in the vehicle’s owner manual or on a label located inside the driver’s door. Aim to check the pressure at least once a month.
Inspecting the spare tire for damage is another key step. Look for any visible signs like cracks, bulges, or punctures. Damaged tires can be ineffective in emergencies. Conduct this inspection each time you rotate your regular tires or at least every six months.
Ensuring proper storage conditions is also essential. The spare tire should be stored in a clean, dry place within the vehicle. Avoid placing heavy items on top of the spare tire, as this can cause unnecessary pressure and potential damage. Regularly cleaning the tire and rim from dirt and debris will help to keep it in good condition.
By following these steps, you can ensure that your spare tire is ready for use when needed, thus enhancing your vehicle’s safety and reliability.
Related Post: